3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering inform at io n call
800-225-5373
3M Mini D Ribbon (MDR) Cable Assembly
.050" High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C
Physical
Electrical
Environmental
*RoHS = Directive 2002/95/EC, Restrict ion of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
"RoHS compliant" mea ns that the product or part does not contain any of the following substances in exce ss of the following maximum con centration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated bi phenyls or prolybromiant ed diphenyl ethers; or (b) 0.01% (by weight ) for cadmium. Unless other wise stated b y 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
FPD Link is a registered trademark of National Semiconductor Inc.
PanelLink and TMDS are trademarks of Silicon Image, Inc.
FlatLink is a trademark of Texas Instruments, Inc.
ChannelLink is a trademark of Computer Network Technology Corp.
Connector Contact Plating
Wiping Area: 30µ" [ 0.76µm ] Min. Gold
Shell Color: Beige
Shell Material: Acrylonitrile Butadiene Styrene (ABS)
Cable Color: Beige
Cable Jacket Material: Polyvinyl Chlorid e (PV C)
CableFlammability: AWM VW-1
Voltage Rating: 30 V
Current Rating: 1 A
Insulation Resistance: > 1 × 108Ω at @100 Vdc
Withstanding Voltage: 350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance: 100 ± 10Ω
Conductor Size: 28 AWG Stranded
Propogation Velocity: 1.25 ns/ft [4.1 ns/m ]
Temperature Rating: -20°C to +75°C
TS-0757-17
Sheet 1 of 4
Solution for Digital Displays, Datacom and
Telecom applications
Supports LVDS FPD Link, FlatLink,
ChannelLink, PanelLink/TMDS
electrical interfaces
Each differential twin-ax pair has a foil shield
and drain
Entire cable bundle is shielded with foil and
braid for additional signal protection
Rugged MDR ribbon type contact
Quick release latches
RoHS* compliant
Date Modified: May 15 , 2006
UL File No.: E86982
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Length
060 = 0.61 meter (2 ft.)
100 = 1 meters
200 = 2 meters
300 = 3 meters
500 = 5 meters
A00 = 10 meters
3M Mini D Ribbon (MDR) Cable Assembly
.050" High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C
TS-0757-17
Sheet 2 of 4
Notes:
1. USB/DDC Gnd grounding pins for USB and DDC are not commoned in the cable
assembly. The end user must specify proper grounding at the board level.
2. Contact 3M for polarization key system.
[Inch]
Tolerance Unless Noted
mm
mm
[ ] Dimensions for
Reference only
± .10
± .1
0.00
0.0
Ordering Information 14526-EZ8B-XXX-07C
MDR 26 Position Plug
( Both Ends )
LENGTH
41.9
1.7 41.9
1.7
Cable
(See wiri ng diagram for cable construction)
2X Squeeze Release
Latches
2X Squeeze Release
Latches
26 Pos i t ion H igh Dens ity
Mini D Ribbon (MDR)
Male Plug
26 Position High Density
Mini D Ribbon (MDR)
Male Plug
(S ee or de r ing inf or mation)
1234567 1213111089
15 16 17 18 19 20 21 22 23 2414 25 26
33.5
1.3
11.5
0.5
Assembly Length Tolerance
Cable Length:
0.5 to 1.5 meters -0 + .05 meters
2 to 10 meters -0 +3% of length
Length
050 = 0.5 meter
150 = 1.5 meters
250 = 2.5 meters
350 = 3.5 meters
400 = 4 meters
450 = 4.5 meters
600 = 6 meters
700 = 7 meters
800 = 8 meters
900 = 9 meters
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M Mini D Ribbon (MDR) Cable Assembly
.050" High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C
TS-0757-17
Sheet 3 of 4
28 AWG insulated
conductor
Symbols Key:
100 Ohm balanced
individually shielded
twisted pair w/drain
Cable
Receiver, Rx
3M MDR SMT
Receptacle
Transmitter, Tx
3M MDR SMT
Receptacle
MDR 26 Pin, PanelLink/TMDS Pinout P26-7 (Rev 7.0)
1
USB/DDC Gnd
5
Tx1-
22
Tx0+
14
Tx2+
2
Tx2 Shield
15
Tx2-
3
Sense
16
USB/DDC Gnd
4
Tx1+
17
Tx1 Shield
18
DDC/SDA
6
Reserved
19
Reserved
7
Reserved
20
USB+
8
USB Shield
21
USB-
9
DDC/SCL
10
Tx0 Shield
23
Tx0-
11
DDC +5VDC
24
USB +5VDC
12
TxC+
25
TxC Shield
13
TxC-
26
USB/DDC Gnd
26
USB/DDC Gnd
13
Rx2+
25
Rx2 Shield
12
Rx2-
24
Sense
11
USB/DDC Gnd
23
Rx1+
10
Rx1 Shield
22
Rx1-
9
DDC/SDA
21
Reserved
8
Reserved
20
Reserved
7
USB+
19
USB Shield
1
USB/DDC Gnd
6
USB-
18
DDC/SCL
5
Rx0+
17
Rx0 Shield
4
Rx0-
16
DDC +5VDC
15
RxC+
2
RxC Shield
14
RxC-
3
USB +5VDC
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M Mini D Ribbon (MDR) Cable Assembly
.050" High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C
TS-0757-17
Sheet 4 of 4
28 AWG insulated
conductor
Symbols Key:
100 Ohm balanced
individually shielded
twisted pair w/drain
Cable Receiver, Rx
3M MDR SMT
Receptacle
Transmitter, Tx
3M MDR SMT
Receptacle
MDR 26 Pin, FPD Link Pinout DISM 1.0
1
Gnd (DDC)
5
TxOut1+
22
TxClkOut-
14
TxOutO-
2
TxOut0Gnd
15
TxOut0+
3
Sense
16
Gnd (USB/
DDC)
4
TxOut1-
17
TxOut1Gnd
18
DDC/SDA
6
TxOut2-
19
TxOut2Gnd
7
TxOut2+
20
USB+
8
USB Shield
21
USB1-
9
DDC/SCL
10
TxClkOutGnd
23
TxClkOut+
11
USB +5VDC
12
TxOut3-
25
TxOut3Gnd
13
TxOut3+
26
DDC Gnd
26
Gnd (DDC)
13
RxIN0-
25
RxIN0Gnd
12
RXINO+
11
Gnd
(USB/DDC)
23
RxIN1-
10
RxIN1Gnd
22
RxIN1+
9
DDC/SDA
21
RxIN2-
8
RxIN2Gnd
20
RxIN2+
7
USB+
19
USB Shield
1
DDC Gnd
6
USB-
18
DDC/SCL
5
RxCLKIN-
17
RxCLKinGnd
4
RxCLKIN+
16
USB +5VDC
15
RxIN3-
2
RxIN3Gnd
14
RxIN3+
24
DDC +5VDC 3
DDC +5VDC
24
Sense
3
Printed in USA.
Minimum 10%
Post-Consumer Fiber
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics © 3M 2006
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
3M:
14526-EZ8B-150-07C 14520-EZAB-A00-0EC (RC) 14526-EZ8B-050-07C 14526-EZ8B-200-07C 14526-EZ8B-A00-
07C 14526-EZ8B-100-07C 14526-EZ8B-060-07C 14526-EZ8B-300-07C 14526-EZ8B-500-07C 14526-EZHB-200-
0QC (RC) 14150-EZBB-150-OLC 14526-EZ8B-050-07C-RC