Sumitomo Electric Industries, Ltd. Part No.: Document No.: Date of issue: SPT3300 Series HUW9824045-01D July 21, 2000 Technical Specification of Long Wavelength PIN Photodiode Module SPT3300 Series Page 1 of 7 Sumitomo Electric Industries, Ltd. Part No.: Document No.: Date of issue: SPT3300 Series HUW9824045-01D July 21, 2000 1. General SPT3300 Series are InGaAs/InP PIN photodiode modules designed for fiber optic communication systems. These modules have low capacitance, high speed and low dark current. A photodiode is mounted into a low capacitance coaxial package integrated with a single mode fiber pigtail. 2. Package dimension and pin assignment (See attached appendix.) 3. Absolute maximum ratings (Tc=+25C, unless otherwise noted.) Parameter Storage temperature Operating case temperature Reverse voltage Reverse current Forward current Soldering temperature (10sec.) Symbol Ratings Tstg -40~+85 Top -40~+85 Vr 15 Ir 2 If 50 Stemp 260 Page 2 of 7 Unit C C V mA mA C Sumitomo Electric Industries, Ltd. Part No.: Document No.: Date of issue: SPT3300 Series HUW9824045-01D July 21, 2000 4. Electrical and optical characteristics (Vr=5V, Tc=+25C, unless otherwise noted.) Parameter Responsivity Symbol Condition R l=1310nm, (*1) l=1550nm, (*1) Bandwidth fc l=1310nm, 3dB dwon, RL=50W Dark current Id Total capacitance Cp f=1MHz, (*2) Optical Return Loss ORL l=1310nm l=1550nm Active diameter -- f Note: *1. Measured with the standard equipment of SEI. *2. Measured at anode-cathode, case open and not grounded. 5. Fiber pigtail specification Parameter Type Mode field diameter@1310nm Cladding diameter Outer jacket diameter Bending radius Min. Typ. Max. Single Mode 8.5 9.5 10.5 122 125 128 0.8 0.9 1.0 30 -- -- Page 3 of 7 Unit -- m m mm mm Min. 0.80 0.85 2 -- -- -- -- -- Typ. 0.85 0.90 -- 0.1 0.6 -- -- 80 Max. -- -- -- 1 0.9 -30 -30 -- Unit A/W GHz nA pF dB m Sumitomo Electric Industries, Ltd. Part No.: Document No.: Date of issue: SPT3300 Series HUW9824045-01D July 21, 2000 6. Ordering information Part number SPR3303-CN SPT3303-CP SPT3303-CS SPR3303-DN SPT3303-DP SPT3303-DS SPR3303-QN SPT3303-QP SPT3303-QS SPR3305-CN SPT3305-CP SPT3305-CS SPR3305-DN SPT3305-DP SPT3305-DS SPR3305-QN SPT3305-QP SPT3305-QS Pin assignment Connector type Type A Type B Flange type (hole pitch) Flangeless SC/PC Vertical (12mm) Horizontal (12.7mm) Flangeless FC/PC Vertical (12mm) Horizontal (12.7mm) Flangeless SC/Angled PC Vertical (12mm) Horizontal (12.7mm) Flangeless SC/PC Vertical (12mm) Horizontal (12.7mm) Flangeless FC/PC Vertical (12mm) Horizontal (12.7mm) Flangeless SC/Angled PC Vertical (12mm) Horizontal (12.7mm) 7. Precaution (1) The modules should be handled in the same manner as ordinary semiconductor devices to prevent the electro-static damages. For safe keeping and carrying, the modules should be packaged with ESD proof material. To assemble the modules on PCB, the workbench, the soldering iron and the human body should be grounded. (2) The stress to the fiber pigtail may cause the damage on the performance. The fiber pigtail may snap off by dropping the module. (3) Please pay special attention to the atmosphere condition because the dew on the module may cause some electrical damages. (4) Under such a strong vibration environment as in automobile, the performance and reliability are not guaranteed. Page 4 of 7 Sumitomo Electric Industries, Ltd. Part No.: Document No.: Date of issue: SPT3300 Series HUW9824045-01D July 21, 2000 Appendix Part No.: SPT330 o - oo / ooo (Customize code) Connector type SC/PC FC/PC SC/Angled PC No connector Code N P S X Flange type Flangeless Vertical (12.0mm) Horizontal (12.7mm) (Customize) Code Pin assignment 3 Type A 5 Type B 3-f0.3 P.C.D. 2.00.5 f6.5 f0.9 Pin No. Pin function for typeA and typeB 1 (CASE) 2 PD cathode 3 PD anode Pin assignment f6.5 Flange type Connector type (f5.7) Code C D Q X 1000 min SC/PC connector 241 2 1 12 min. Flangeless 3 1 3 Type A 2 Type B 2 3 1000 min FC/PC connector 8 polished 18.00.2 12.0 f6.5 f7.2 2-f2.2 1000 min SC/Angled PC connector No connector 1000 min Vertical flange 2.5 251 1.0 11 min. 1 1 3 2 Type A Type B 2 3 8.0 8.00.2 12.7 17.00.2 2-f2.4 Unit: mm Horizontal flange 4.0 241 1 1 3 Type A 12 min. Tolerance: 0.1mm, unless otherwise noted Page 5 of 7 8.00.2 2 Type B Sumitomo Electric Industries, Ltd. Part No.: Document No.: Date of issue: 8. For More Information U.S.A. Sumitomo Electric Lightwave Corp. 78 Alexander Drive, Research Triangle Park, NC, 27709 U.S.A. Tel. (919) 541-8100 Fax. (919) 541-8376 E-mail: info@sumitomoelectric.com URL: http://www.sumitomoelectric.com Europe Sumitomo Electric Europe Ltd. 220 Centennial Park, Centennial Avenne, Elstree, Herts, WD6 3SL United Kingdom Tel. (020) 8953-8118 Fax. (020) 8207-5950 Japan Sumitomo Electric Industries, Ltd. (International Business Division) 3-12, Moto-Akasaka 1-chome, Minato-ku Tokyo, 107-8468 Japan Tel. (03) 3423-5771 Fax. (03) 3423-5099 E-mail: product_info@ppd.sei.co.jp URL: http://www.sei.co.jp/Electro-optic/index_e.html Page 6 of 7 SPT3300 Series HUW9824045-01D July 21, 2000 Sumitomo Electric Industries, Ltd. Part No.: Document No.: Date of issue: SPT3300 Series HUW9824045-01D July 21, 2000 Revision Record Document No. Date of issue Description Incorporated by Checked by HUW9824045-01A Nov./16/98 Preliminary issue. H. Michikoshi T. Nakanishi HUW9824045-01B May/24/99 Removed Pin=1mW of common T. Nakanishi T. Fujitani conditions in section 4; Corrected part No. for Pin assignment. HUW9824045-01C Jul./12/00 Initial issue; T. Nakanishi T. Fujitani Added bandwidth to electrical and optical spec; Corrected bending radius from min.: 40mm to min.: 30mm; Corrected tolerance of the horizontal flange; Changed the vertical flange design. HUW9824045-01D Jul./21/00 Revised Tstg from -40~+90C to - T. Nakanishi T. Fujitani 40~+85C. Page 7 of 7 Approved by T. Fujitani T. Fujitani T. Fujitani T. Fujitani