ITT2F-BH - FUJITSU - Datasheet.Directory

FTR-K1 SERIES

n FEATURES

l Compact for high density packaging

l High contact capacity with proven contact material.

(100,000 operations, 14 V, 25 A)

l Coil power savings (600mW nominal achieved with state-of-the-

art magnetic design)

l Ease of PCB layout (all terminals on perimeter, coil and contact

terminals separated)

l Optional over-voltage circuit breaking capability

(0.6mm gap, contact our representative)

l Packaging for auto-insertion (tube packing, 30 relays/tube)

l Application examples: power window, power seat,

tilt steering, sunroof, wiper, retractable antenna, etc.

l Reowable & high stand-off type available.

l RoHS compliant

Please see page 7 for more information

Actual marking does not carry the type name: "FTR (-ML) (-06)"

E.g.: Ordering code: FTR-P3CN012W1-06 Actual marking: P3CN012W1

FTR-P3 Series

COMPACT POWER RELAY

For automotive applications

1 POLE-25A (for 12V car battery)

(a) Relay type FTR-P3 : FTR-P3 Series

(b) Contact conguration A

: 1 form A (only with -06)

: 1 form C

: 0.25mm gap

: 0.6mm gap (standard and -ML)

(d) Coil rated voltage 012 : 9.....12VDC

Coil rating table at page 3

(e) Contact material W1 : Silver-tin oxide indium

(f) Special type None

-ML

-06

: Standard

: Multi-layered contacts

: High stand-off (Reowable type)

n PARTNUMBER INFORMATION

[Example] FTR-P3 C N 012 W1 -06

(a) (b) (c) (d) (e) (f)

FTR-K1 SERIES

* 1 Need to consider the heat from PCB when max. current is more than 10A.

* 2 Minimum switching loads mentioned above are reference values. Please perform the conrmation test with actual

load before production since reference values may vary according to switching frequencies, environmental conditions

and expected reliability levels.

FTR-P3 SERIES

n SPECIFICATION

Item FTR-P3

Standard

(without sufx)

Multi layered con-

tact (-ML)

Reowable

(-06)

Contact Data Conguration 1 form C (SPDT) 1 form A

(SPST)

1 form C

(SPDT)

Material Silver-tin oxide indium

Contact path voltage drop Max. 100mV at 1A, 12VDC

Contact rating 25A at 14VDC (locked motor load)

Max. carrying current *125A/1 hour (25 °C, 100% rated coil voltage)

Max. switching voltage 16VDC (reference)

Max. switching current 35A (reference)

Min. switching load * 26VDC, 1A (reference)

Life Mechanical Min. 10 x 106

operations Min. 1 x 106 operations

Electrical Min. 100 x 103 operations, 14VDC, 25A (locked motor load) (1

operation = 1 forward and 1 reverse)

Coil data Operating ambient temperature range -40 °C to +85 °C (no frost) -40 °C to +125 °C

(no frost)

Storage temperature range (no frost) -40 °C to +85 °C,

45 ~ 85% RH

-40 °C to +100 °C,

45 ~ 85% RH

-40 °C to +125 °C,

45 ~ 85% RH

Timing Data Operate (at nominal voltage) Max. 10 ms (without bounce)

Release (at nominal voltage) Max. 5 ms (without bounce, no diode)

Max. 15 ms (without bounce, with diode)

Insulation Resistance (initial) 100M Ω at 500VAC

Dielectric withstanding voltage (initial) 500VAC, 1 minute

Other

Vibration resistance

Misoperation 10 to 200Hz, acceleration 43m/s2 (4.4G),

constant acceleration

Endurance 10 to 200Hz, acceleration 43m/s2 (4.4G),

constant acceleration

Shock Misoperation 100m/s² minimum (11+/-1ms)

Endurance 1,000m/s² minimum (6+/-1ms)

Weight Approximately 5 g

FTR-K1 SERIES

FTR-P3 SERIES

Coil

Code

Rated Coil

Voltage

(VDC)

Coil Resistance +/-

10% (Ohm)

Must Operate

Voltage

(VDC) *

Must Release

Voltage

(VDC) *

009 9 135 5.5 (at 20 °C) 0.7 (at 20 °C)

6.9 (at 85 °C) 0.9 (at 85 °C)

010 10 167 6.3 (at 20 °C) 0.8 (at 20 °C)

7.9 (at 85 °C) 1.0 (at 85 °C)

012 12 240 7.3 (at 20 °C) 1.0 (at 20 °C)

9.2 (at 85 °C) 1.3 (at 85 °C)

n COIL RATING

FTR-P3 Series (0.25mm contact gap) (Standard, multi layered contact)

Coil

Code

Rated Coil

Voltage

(VDC)

Coil Resistance +/-

10% (Ohm)

Must Operate

Voltage

(VDC) *

Must Release

Voltage

(VDC) *

009 9 100 5.5 (at 20 °C) 0.7 (at 20 °C)

6.9 (at 85 °C) 0.9 (at 85 °C)

010 10 125 6.3 (at 20 °C) 0.8 (at 20 °C)

7.9 (at 85 °C) 1.0 (at 85 °C)

012 12 167 7.3 (at 20 °C) 1.0 (at 20 °C)

9.2 (at 85 °C) 1.3 (at 85 °C)

Coil

Code

Rated Coil

Voltage

(VDC)

Coil Resistance +/-

10% (Ohm)

Must Operate

Voltage

(VDC) *

Must Release

Voltage

(VDC) *

009 9 135 5.5 (at 20 °C) 0.7 (at 20 °C)

6.9 (at 85 °C) 0.9 (at 85 °C)

7.8 (at 125 °C) 1.0 (at 125 °C)

010 10 167 6.3 (at 20 °C) 0.8 (at 20 °C)

7.9 (at 85 °C) 1.0 (at 85 °C)

8.9 (at 125 °C) 1.1 (at 125 °C)

012 12 240 7.3 (at 20 °C) 1.0 (at 20 °C)

9.2 (at 85 °C) 1.3 (at 85 °C)

10.3 (at 125 °C) 1.4 (at 125 °C)

FTR-P3 Series (0.6mm contact gap) (Standard, multi layered contact)

FTR-P3-06 Series

Note: All values in the tables are valid for 20°C and zero contact current, unless otherwise stated.

Must operate voltages/must release voltages at 125degC are available only for reowable type.

* Specied operate values are valid for pulse wave voltage.

FTR-K1 SERIES

FTR-P3 SERIES

n CHARACTERISTIC DATA

FTR-K1 SERIES

FTR-P3 SERIES

FTR-K1 SERIES

FTR-P3 SERIES

-40 -20 0

20 40

Ambient temperature (℃)

Coil Voltage (V)

60 80 100 120

Operating temperature

-40℃ min.

Operating temperature

+125℃ min.

Continuous operating

range at 10A carry current

10A continuous

Coil 16.0V max.

Must operate voltage

-30

Ambient temperature (℃)

Ratio to nominal coil voltage (%)

-20 0 20 40

100

120

140

60 80 100

Must operate voltage

Continuous operating

range at 10A carry current

Operating coil voltage range

(Standard/Multi-layered contacts)

Operating coil voltage range

(Reflowable)

FTR-K1 SERIES

FTR-P3 SERIES

l PC board mounting hole layout

(Plated through hole)

(BOTTOM VIEW)

5 5 5

+0,1

-0

(1.2)

5 -φ1.5

5.5

FTR-P3CN***W1-06 (1 form C)

5 5

+0.1

-0

(1.2)

4 -φ1.5

5.5

FTR-P3AN***W1-06 (1 form A)

5 5 5 (1.2)

5 -φ1.5

5.5

Tolerance: +0.1 / -0 mm unless otherwise specified

unit: mm

+0,1

-0

FTR-P3CN***W1(-ML)

n DIMENSIONS

l Schematics

(BOTTOM VIEW)

* Dimensions of the terminals does not include thickness of pre-solder

Standard multi layered contact

7.2+0.5

FTR-P3CN*** W1 dimensions

Unit: mm

17.4+0.5

13.5

+0.5

0.4

3.5

5.5

FTR-P3-06 dimensionsFTR-P3 dimensions

17.4+0.5

14.1

+0.3

1.3

2.6

7.2+0.5 7.2+0.5

FTR-P3CN***W1-06 (1 form C) dimensions

17.4+0.5

14.1

+0.3

1.3

FTR-P3AN***W1-06 (1 form A) dimensions

1.2

5.5 5.5

2.6

1.2

Unit: mm Unit: mm

5 4 3

1 2

FTR-P3CN***W1-06 (1 form C)

5 4

1 2

FTR-P3AN***W1-06 (1 form A)

5 4 3

1 2

FTR-P3CN***W1(-ML)

FTR-K1 SERIES

FTR-P3 SERIES

1. RoHS Compliance

l All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including

amendments.

l Use of Cadmium in electrical contacts is exempted as per Annex III of the RoHS directive 2001/65/EU.

Please consider expiry date of exemption. Relays with Cadmium containing contacts are not to be used for new designs.

l All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at:

http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf

2. Recommended Lead Free Solder Condition

l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.

This material has been verified to be compatible with PbSn assembly process.

l Recommended solder for assembly: Sn-3.0Ag-0.5Cu.

General Information

3. Moisture Sensitivity

l Moisture Sensitivity Level is not applicable, unless otherwise indicated.

4. Tin Whiskers

l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length

whisker was found by our in house test.

We highly recommend that you conrm your actual solder conditions

Flow Solder Condition:

Pre-heating: maximum 120˚C

within 90 sec.

Soldering: dip within 5 sec. at

255˚C ± 5˚C solder bath

Relay must be cooled by air immediately

after soldering

Flow Solder Condition:

Reow Solder Condition:

Solder by Soldering Iron:

Soldering Iron 30-60W

Temperature: maximum 350-360˚C

Duration: maximum 3 sec.

Reow Solder Condition:

Pre-heating: maximum 170˚C

within 120 sec.

Soldering: maximum 250˚C

within 30 sec.

Note: Please do not reow non-reowable relays.

FTR-K1 SERIES

FTR-P3 SERIES

Fujitsu Components International Headquarter Ofces

The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general

information purposes.

The use of the contents, data and information provided in this datasheet is at the users’ own risk.

Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,

complete and up to date.

Fujitsu Components Europe B.V. and afliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its

employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related

graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.

Nor do Fujitsu Components Europe B.V. and afliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability

for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or tness for particular use,

with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,

usefulness, availability and completeness thereof. Rev. July 20th, 2016

Japan

FUJITSU COMPONENT LIMITED

Shinagawa Seaside Park Tower 19F,

12-4, Higashi-shinagawa 4-chome, Shinagawa-ku,

Tokyo,140-0002, Japan

Tel: (81-3) 3450-1682

Fax: (81-3) 3474-2385

Email: fcl-contact@cs.jp.fujitsu.com

Web: www.fujitsu.com/jp/fcl/

North and South America

FUJITSU COMPONENTS AMERICA, INC

2290 North First Street, Suite 212

San Jose, CA 95131, USA

Tel: (1-408) 745-4900

Fax: (1-408) 745-4970

Email: components@us.fujitsu.com

Web: us.fujitsu.com/components

Europe

FUJITSU COMPONENTS EUROPE B.V.

Diamantlaan 25

2132 WV Hoofddorp

Netherlands

Tel: (31-23) 5560910

Fax: (31-23) 5560950

Email: info@fceu.fujitsu.com

Web: www.fujitsu.com/uk/components

Asia Pacic

FUJITSU COMPONENTS ASIA, LTD.

102E Pasir Panjang Road

#01-01 Citilink Warehouse Complex

Singapore 118529

Tel: (65) 6375-8560

Fax: (65) 6273-3021

Email: fcal@sg.fujitsu.com

Web: www.fujitsu.com/sg/products/devices/components

China

FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD.

Unit 4306, InterContinental Center

100 Yu Tong Road, Shanghai 200070,

China

Tel: (86-21) 3253 0998

Fax: (86-21) 3253 0997

Email: fcal@sg.fujitsu.com

Web: www.fujitsu.com/sg/products/devices/components

Hong Kong

FUJITSU COMPONENTS HONG KONG CO., LTD

Unit 506, Inter-Continental Plaza

No.94 Granville Road, Tsim Sha Tsui, Kowloon,

Hong Kong

Tel: (852) 2881-8495

Tex: (852) 2894-9512

Email: fcal@sg.fujitsu.com

Web: www.fujitsu.com/sg/products/devices/components/

Korea

FUJITSU COMPONENTS KOREA LIMITED

Alpha Tower #403, 645 Sampyeong-dong,

Bundang-gu, Seongnam-si, Gyeonggi-do,

13524 Korea

Tel: (82) 31-708-7108

Fax: (82) 31-709-7108

Email: fcal@sg.fujitsu.com