LMS1585A/LMS1587 5A and 3A Low Dropout Fast Response Regulators General Description Features The LMS1585A and LMS1587 are low dropout positive regulators with output load current of 5A and 3A respectively. Their low dropout voltage (1.2V) and fast transient response make them an excellent solution for low voltage microprocessor applications. The LMS1585A/87 are available in adjustable versions, which can set the output voltage with only two external resistors. In addition, they are also available in 1.5V and 3.3V fixed voltage versions (Note 9). The LMS1585A/87 circuits include a zener trimmed bandgap reference, current limiting and thermal shutdown. The LMS1585A/87 series are available in TO-220 and TO263 packages. n n n n n n n n Fast transient response Available in Adjustable, 1.5V, and 3.3V versions Current limiting and thermal protection Commercial temp. range 0C to 125C Industrial temp. range -40C to 125C Line regulation 0.005% (typical) Load regulation 0.05% (typical) Direct replacement for LTTM1585A/87 Applications n n n n PentiumTM processor supplies PowerPCTM supplies Other microprocessor supplies Low voltage logic supplies Typical Application DS101197-1 Connection Diagrams TO-220 TO-263 DS101197-36 Top View DS101197-35 Top View LT is a registered trademark of Linear Technology Corporation Pentium is a registered trademark of Intel Corporation PowerPC is a registred trademark of IBM (c) 2001 National Semiconductor Corporation DS101197 www.national.com LMS1585A/LMS1587 5A Low Dropout Fast Response Regulators July 2001 LMS1585A/LMS1587 Ordering Information Output Current Package 3A TO-263 Temperature Range Part Number Transport Media 0C to 125C LMS1587CS-ADJ Rails LMS1587CSX-ADJ Tape and Reel LMS1587CS-1.5 Rails LMS1587CSX-1.5 Tape and Reel LMS1587CS-3.3 Rails LMS1587CSX-3.3 Tape and Reel LMS1587IS-ADJ Rails LMS1587ISX-ADJ Tape and Reel -40C to 125C TO-220 0C to 125C TO-263 0C to 125C -40C to 125C TO-220 0C to 125C -40C to 125C www.national.com Rails Tape and Reel LMS1587IS-3.3 Rails LMS1587ISX-3.3 Tape and Reel LMS1587CT-ADJ Rails LMS1587CT-1.5 Rails LMS1587CT-3.3 Rails LMS1587IT-ADJ Rails LMS1587IT-1.5 Rails LMS1587IT-3.3 Rails LMS1585ACS-ADJ Rails LMS1585ACSX-ADJ Tape and Reel -40C to 125C 5A LMS1587IS-1.5 LMS1587ISX-1.5 LMS1585ACS-1.5 Rails LMS1585ACSX-1.5 Tape and Reel LMS1585ACS-3.3 Rails LMS1585ACSX-3.3 Tape and Reel LMS1585AIS-ADJ Rails LMS1585AISX-ADJ Tape and Reel LMS1585AIS-1.5 Rails LMS1585AISX-1.5 Tape and Reel LMS1585AIS-3.3 Rails LMS1585AISX-3.3 Tape and Reel LMS1585ACT-ADJ Rails LMS1585ACT-1.5 Rails LMS1585ACT-3.3 Rails LMS1585AIT-ADJ Rails LMS1585AIT-1.5 Rails LMS1585AIT-3.3 Rails 2 NSC Drawing TS3B T03B TS3B T03B LMS1585A/LMS1587 Simplified Schematic DS101197-14 3 www.national.com LMS1585A/LMS1587 Absolute Maximum Ratings (Note 1) Power Dissipation (Note 2) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Junction Temperature (TJ) (Note 2) Maximum Input to Output Voltage (VIN to GND) Internally Limited Storage Temperature Range 150C -65C to 150C Lead Temperature 260C, 10 sec ESD Tolerance (Note 3) 2000V 13V Electrical Characteristics Typicals and limits appearing in normal type apply for TJ = 25C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0C to 125C for commercial grade and -40C to 125C for industrial grade. Symbol VREF VOUT VOUT VOUT VIN-VOUT ILIMIT Parameter Reference Voltage Output Voltage Line Regulation (Note 6) Load Regulation (Note 6) Dropout Voltage Current Limit www.national.com Min (Note 5) Typ (Note 4) Max (Note 5) Units LMS1585A-ADJ VIN-VOUT = 3V, IOUT = 10mA 10mA IOUT 5A, 1.5V VIN-VOUT 5.75V 1.238 1.225 1.25 1.250 1.262 1.275 V V LMS1587-ADJ 10mA IOUT 3A, 1.5V VIN-VOUT 5.75V 1.225 1.250 1.275 V LMS1585A-1.5 IOUT = 0mA, VIN = 5V 0 IOUT 5A, 3V VIN 7V 1.485 1.470 1.500 1.515 1.530 V V LMS1585A-3.3 IOUT = 0mA, VIN = 5V 0 IOUT 5A, 4.75V VIN 7V 3.267 3.235 3.300 3.300 3.333 3.365 V V LMS1587-1.5 VIN = 5V, IOUT = 0mA, TJ = 25C 0 IOUT 3A, 3V VIN 7V 1.485 1.470 1.500 1.500 1.515 1.530 V V LMS1587-3.3 0 IOUT 3A, 4.75V VIN 7V 3.235 Conditions 3.300 3.365 V LMS1585A/87-ADJ IOUT = 10mA, 2.75V VIN 7V 0.005 0.2 % LMS1585A/87-3.3 IOUT = 0mA, 4.75V VIN 7V 0.005 0.2 % LMS1585A/87-1.5 IOUT = 0mA, 3V VIN 7V 0.005 0.2 % LMS1585A-ADJ VIN-VOUT = 3V, 10mA IOUT 5A % 0.05 0.3 0.5 LMS1585A-1.5/LMS1585A-3.3 VIN = 5V, 0 IOUT 5A 0.05 0.05 0.3 0.5 % LMS1587-ADJ VIN-VOUT = 3V, 10mA IOUT 3A 0.05 0.05 0.3 0.5 % LMS1587-1.5/LMS1587-3.3 VIN = 5V, 0 IOUT 3A 0.05 0.05 0.3 0.5 % % LMS1585A-ADJ/LMS1587-ADJ VREF = 1%, IOUT = 3A 1.15 1.3 V LMS1585A-3.3/LMS1587-3.3/ LMS1585A-1.5/LMS1587-1.5 VOUT = 1%, IOUT = 3A 1.15 1.3 V LMS1585A-ADJ VREF = 1%, IOUT = 5A 1.2 1.4 V LMS1585A-1.5/LMS1585A-3.3 VOUT = 1%, IOUT = 5A 1.2 1.4 V LMS1585A-ADJ/LMS1585A-3.3/LMS1585A-1.5 VIN-VOUT = 5.5V 5.0 6.6 A LMS1587-ADJ/LMS1587-3.3/LMS1587-1.5 VIN-VOUT = 5.5V 3.1 4.3 A 4 (Continued) Typicals and limits appearing in normal type apply for TJ = 25C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0C to 125C for commercial grade and -40C to 125C for industrial grade. Symbol Parameter Conditions Min (Note 5) Typ (Note 4) Max (Note 5) Units Minimum Load Current (Note 7) LMS1585A/87-ADJ 1.5V VIN-VOUT 5.75V 2.0 10.0 mA Quiescent Current LMS1585A-3.3/LMS1587-3.3/ LMS1585A-1.5/LMS1587-1.5 VIN = 5V 7.0 13.0 mA Thermal Regulation TA = 25C, 30ms Pulse Ripple Rejection LMS1585A-ADJ fRIPPLE = 120Hz, VIN-VOUT = 3V, IOUT = 5A, COUT = 25F Tantalum 0.003 %/W 72 dB 72 dB LMS1585A-3.3 fRIPPLE = 120Hz, COUT = 25F Tantalum, IOUT = 5A, VIN = 6.3V 72 dB LMS1587-ADJ fRIPPLE = 120Hz, VIN-VOUT = 3V, IOUT = 3A COUT = 25F Tantalum 72 dB 72 dB LMS1585A-1.5 fRIPPLE = 120Hz, COUT = 25F Tantalum, IOUT = 5A, VIN = 4.5V LMS1587-1.5 fRIPPLE = 120Hz, COUT = 25F Tantalum, IOUT = 3A, VIN = 4.5V LMS1587-3.3 fRIPPLE = 120Hz, COUT = 25F Tantalum, IOUT = 3A, VIN = 6.3V Adjust Pin Current Adjust Pin Current 60 60 72 55 10mA IOUT IFULLLOAD, 1.5V VIN-VOUT 5.75V (Note 8) Temperature Stability dB 120 A 0.2 A 0.5 % Long Term Stability TA = 125C, 1000Hrs 0.03 % RMS Output Noise (% of VOUT) 10Hz f 10kHz 0.003 % Thermal Resistance Junction-to-Case 3-Lead TO-263: Control/Output Section 3-Lead TO-220: Control/Output Section 0.65/2.7 0.65/2.7 C/W C/W Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics. Note 2: The maximum power dissipation is a function of TJ(max) , JA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(max)-T A)/JA. All numbers apply for packages soldered directly into a PC board. Note 3: For testing purposes, ESD was applied using human body model, 1.5k in series with 100pF. Note 4: Typical Values represent the most likely parametric norm. Note 5: All limits are guaranteed by testing or statistical analysis. Note 6: Load and line regulation are measured at constant junction temperature, and are guaranteed up to the maximum power dissipation of 30W. Power dissipation is determined by the input/output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. Note 7: The minimum output current required to maintain regulation. Note 8: IFULLLOAD is 5A for LMS1585A and 3A for LMS1587. Note 9: Consult factory for other fixed voltage options. 5 www.national.com LMS1585A/LMS1587 Electrical Characteristics LMS1585A/LMS1587 Application Note Output Voltage The adjustable version develops at 1.25V reference voltage, (VREF), between the output and the adjust terminal. As shown in Figure 1, this voltage is applied across resistor R1 to generate a constant current I1. This constant current then flows through R2. The resulting voltage drop across R2 adds to the reference voltage to sets the desired output voltage. The current IADJ from the adjustment terminal introduces an output error. But since it is small (120A max), it becomes negligible when R1 is in the 100 range. For fixed voltage devices, R1 and R2 are integrated inside the devices. DS101197-72 FIGURE 1. Basic Adjustable Regulator www.national.com 6 LMS1585A/LMS1587 Physical Dimensions inches (millimeters) unless otherwise noted 3-Pin TO-263 NS Package Number TS3B 7 www.national.com LMS1585A/LMS1587 5A Low Dropout Fast Response Regulators Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 3-Pin TO-220 NS Package Number T03B LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: ap.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.