29
max. 67 m3/h DC axial fans
Series 620 60 x 60 x 25 mm
Highlights:
– Very rigid compression curve for high air flow at high back pressure.
– Motor with very low structure-borne noise.
– Innovative impeller with winglets for low noise.
– Control inputs, alarm and speed signals available on request.
General characteristics:
– Material: fibreglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and locking.
– Connection via single strands AWG 22, TR 64. Bared and tin-plated.
– Air exhaust over struts. Direction of rotation clockwise, seen on rotor.
– Mass: 85 g.
Nominal data
Specials
Type m3/h CFM VDC VDC dB(A) Bel(A) /Watts RPM °C Hours Hours P. 110
622 L 21 12,4 12 8...15 20 3,7 0,5 3 200 -20...+85 80 000 / 20 000 160 000 1
622 M 30 17,7 12 8...15 29 4,3 1,0 4 550 -20...+75 77 500 / 30 000 150 000 2
622 N 40 23,5 12 8...15 35 4,7 1,9 6 100 -20...+70 72 500 / 35 000 140 000 3 /2
622 H 46 27,1 12 8...15 39 5,1 2,3 6 850 -20...+70 70 000 / 35 000 140 000 4
622 HH 56 33,0 12 8...15 43 5,6 3,5 8 200 -20...+70 65 000 / 32 500 130 000 5
NEW 622 /2H3P 67 39,4 12 8...13,2 48 5,9 6,3 9 700 -20...+60 52 500 / 32 500 105 000 6
624 L 21 12,4 24 18...28 20 3,7 1,0 3 200 -20...+70 80 000 / 40 000 160 000 1
624 M 30 17,7 24 12...28 29 4,3 1,5 4 550 -20...+70 77 500 / 37 500 150 000 2
624 N 40 23,5 24 12...28 35 4,7 2,2 6 100 -20...+70 72 500 / 35 000 140 000 3
624 H 46 27,1 24 18...28 39 5,1 2,4 6 850 -20...+70 70 000 / 35 000 140 000 4
624 HH 56 33,0 24 18...28 43 5,6 3,6 8 200 -20...+70 65 000 / 32 500 130 000 5 /2
NEW 624 /2H3P 67 39,4 24 18...28 48 5,9 5,8 9 700 -20...+60 52 500 / 32 500 105 000 6
628 HH 56 33,0 48 36...56 43 5,6 4,2 8 200 -20...+70 65 000 / 32 500 130 000 5 /2
0 5 10 15 20 25 30
10 20
25
30
75
40
50
100
125
50
1
2
3
4
5
0,4
0,3
0,2
0,1
m³/h
Pa
CFM
[in H2O]
0 10 20 3 0
0,4 0,6
0,2
6
35
70
140
105
175
10 20 30 40 50 60 m³/h
Pa
CFM
[in H2O]
Nominal voltage
Air flow
Air flow
Voltage range
Sound pressure level
Sound power level
Sintec sleeve bearings
Ball bearings
Power input
Nominal speed
Temperature range
Service life L10 (40 °C)
ebm-papst Standard
Service life L10 (Tmax)
ebm-papst Standard
Life expectancy L10∆
(40 °C) see P. 15
Curve
HHPP
AA
IP54IP54
Û
PWMPWM
II
TT
NN
GG
Type m3/h CFM VDC VDC dB(A) Bel(A) /Watts RPM °C Hours Hours P. 110/118
605 F 29 17,1 54,5...5,2 27 4,4 1,1 4 000 -20...+50 50 000 / 20 000 50 000 2 /2
612 FL 19 11,2 12 11,5...13,2 16 3,6 0,4 2 650 0...+70 50 000 / 20 000 62 500 1
612 F 29 17,1 12 10,8...13,2 27 4,4 1,0 3 900 -20...+70 50 000 / 20 000 62 500 2 /2
612 FH 33 19,4 12 10,0...13,2 31 4,8 1,4 4 500 -20...+60 45 000 / 15 000 47 500 3 /2/39
614 F 29 17,1 24 21,6...26,4 27 4,4 1,1 3 900 -20...+70 50 000 / 20 000 62 500 2 /2
612 FL-680 19 11,2 12 11,5...14 16 3,6 0,5 2 650 -20...+85 50 000 / 20 000 62 500 1
612 F-637 29 17,1 12 10,8...12,6 27 4,4 1,0 3 900 -20...+80 50 000 / 20 000 62 500 2
InformationDC axial fans
Accessories
Representatives AC centrifugal fans DC fans - specials
ACmaxx / i-maxx
AC axial fans DC centrifugal fans
Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 29
