AFCT-5710Z and AFCT-5715Z Families of Single-Mode Small Form Factor Pluggable (SFP) Optical Transceivers with Optional DMI for Gigabit Ethernet (1.25 GBd) Data Sheet Part Number Options Features The AFCT-571xZ SFP family consists of the following products: * ROHS-6 Compliant * Optional Digital Diagnostic Monitoring available - AFCT-5710Z family: without DMI - AFCT-5715Z family: with DMI * Per SFF-8472, diagnostic features on AFCT-5715Z family enable Diagnostic Monitoring Interface for optical transceivers with real-time monitoring of: - Transmitted optical power - Received optical power - Laser bias current - Temperature - Supply voltage * Compliant to IEEE 802.3Z Gigabit Ethernet (1.25 GBd) 1000BASE-LX & Small Form Factor Pluggable (SFP) Multi-Source Agreement (MSA) * Manufactured in an ISO 9001 compliant facility * Hot-pluggable * Temperature options (Extended) -10C to +85C (Industrial) -40C to +85C * +3.3 V dc power supply * 1310 nm longwave laser * Eye safety certified: - US 21 CFR(J) - IEC 60825-1 (+All) * LC-Duplex fiber connector compatible * Link Lengths at 1.25 GBd: - 0.5 to 550 m - 50 m MMF - 0.5 to 550 m - 62.5 m MMF - 0.5 m to 10 km - SMF Part Number AFCT-5710LZ AFCT-5710PZ AFCT-5710ALZ AFCT-5710APZ AFCT-5715LZ AFCT-5715PZ AFCT-5715ALZ AFCT-5715APZ DMI No No No No Yes Yes Yes Yes Temperature Extended Extended Industrial Industrial Extended Extended Industrial Industrial Latch Design Standard Bail Standard Bail Standard Bail Standard Bail * Extended Temperature Range is -10 to 85 degrees C Industrial Temperature Range is -40 to 85 degrees C Description The AFCT-571xZ family of Small Form Factor Pluggable (SFP) LC optical transceivers offers a wide range of design options, including optional DMI features (further described later), two temperature ranges (extended or industrial), and choice of standard or bail delatch. The AFCT-5715Z family targets applications requiring DMI, while the AFCT-5710Z family is streamlined for those applications where DMI is not needed. Throughout this datasheet, AFCT-571xZ will refer to the entire product family encompassing this full range of product options. Related Products * AFBR-5705Z SFP family: 1.25GBd Ethernet (1000BASE-SX) & 1.0625GBd Fiber Channel with DMI * AFBR-5701Z SFP family: 1.25GBd Ethernet (1000BASE-SX) & 1.0625GBd Fiber Channel without DMI * AFCT-5715Z SFP family: 1.25GBd Ethernet (1000BASE-LX) with DMI * AFCT-5710Z SFP family: 1.25GBd Ethernet (1000BASE-LX) without DMI Applications * Ethernet Switch * Enterprise Router * Broadband aggregation and wireless infrastructure * Metro Ethernet multi-service access & provisioning platforms Overview SFP MSA Compliance The AFCT-571xZ family is compliant with both IEEE 802.3Z (1000BASE-LX) and the SFP Multi-Source Agreement (MSA) specification. These transceivers are intended for premise, public and access networking applications. They are qualified in accordance with GR468-CORE, and transmit data over single-mode (SM) fiber for a link distance of 10 km, in excess of the standard. The product package is compliant with the SFP MSA with the LC connector option. The SFP MSA includes specifications for mechanical packaging and performance as well as dc, ac and control signal timing and performance. The AFCT-5715Z family of optical transceivers adds digital diagnostic monitoring to standard SFP functionality, enabling fault isolation, components monitoring and failure prediction capabilities. The AFCT-571xZ is compliant to 1 GbE specifications. This includes specifications for the signal coding, optical fiber and connector types, optical and electrical transmitter characteristics, optical and electrical receiver characteristics, jitter characteristics, and compliance testing methodology for the aforementioned. This transceiver is capable of implementing both Single Mode (SM) and Multimode (MM) optical fiber applications in that order of precedence in the event of conflicting specifications. In addition, the SM link type exceeds the 2 m to 5 km 1000BASE-LX specification by achieving compliance over 2 m to 10 km. The MM link type is expected to meet the 62.5 m MMF specification when used with an "offset launch" fiber. Light from Fiber The High Speed I/O (HSIO) signal interface is a Low Voltage Differential type. It is ac coupled and terminated internally to the module. The internal termination is a 100 Ohm differential load. Installation General Features Optical Interface The power supply is 3.3 V dc. The AFCT-571xZ can be installed in or removed from any MSA-compliant Pluggable Small Form Factor (SFP) port regardless of whether the host equipment is operating or not. The module is simply inserted, electrical-interface first, under finger-pressure. Controlled hot-plugging is ensured by 3-stage pin sequencing at the electrical interface. This printed circuit board card-edge connector is depicted in Figure 2. As the module is inserted, first contact is made by the housing ground shield, discharging any potentially component-damaging static electricity. Ground pins engage next and are followed by Tx and Rx power supplies. Finally, signal lines are connected. Pin functions and sequencing are listed in Table 2. Electrical Interface Receiver Photo-Detector Amplification & Quantization RD+ (Receive Data) RD- (Receive Data) Rx Loss Of Signal MOD-DEF2 (SDA) text Controller & Memory MOD-DEF1 (SCL) MOD-DEF0 Transmitter Light to Fiber Laser TX_DISABLE Laser Driver & Safety Circuit TD+ (Transmit Data) TD- (Transmit Data) TX_FAULT Figure 1. Transceiver Functional Diagram 2 321 20 VEET 19 Transmitter Section 321 ENGAGEMENT SEQUENCE The transmitter section includes a 1310 nm Fabry-Perot laser and a transmitter driver circuit. The driver circuit maintains a constant optical power level provided that the data pattern is valid 8B/10B code. Connection to the transmitter is provided via a LC optical connector. 1 VEET TD- 2 TX FAULT 18 TD+ 3 TX DISABLE 17 VEET 4 MOD-DEF(2) 16 VCCT 5 MOD-DEF(1) The transmitter has full IEC 60825 and CDRH Class 1 eye safety. 15 VCCR 6 MOD-DEF(0) TX_DISABLE 14 VEER 7 RATE SELECT 13 RD+ 8 LOS 12 RD- 9 VEER 11 VEER 10 VEER The transmitter output can be disabled by asserting pin 3, TX_DISABLE. A high signal asserts this function while a low signal allows normal laser operation. In addition, via the 2-wire serial interface the transmitter output can be disabled (address A2h, byte 110, bit 6) or monitored (address A2h, byte 110, bit 7). The contents of A2h, byte 110, bit 6 are logic OR'd with hardware Tx_Disable (pin 3) to control transmitter operation. In the event of a transceiver fault, such as the activation of the eye safety circuit, toggling of the TX_DISABLE will reset the transmitter, as depicted in Figure 4. TOP OF BOARD BOTTOM OF BOARD (AS VIEWED THROUGH TOP OF BOARD) Figure 2. Pin description of the SFP electrical interface. 1 H 3.3 V 10 F 0.1 F 1 H 3.3 V VCC,T SFP MODULE 0.1 F 4.7 K to 10 K 4.7 K to 10 K Tx_DISABLE Tx_FAULT Tx_FAULT VREFR VREFR SO+ 50 TD+ SO- 50 TD- TX GND TX[0:9] TBC EWRAP PROTOCOL IC RBC Rx_RATE TBC EWRAP 10 F RBC Rx_RATE REFCLK SI+ 100 SI- RD+ 50 RD- Rx_LOS RX GND MOD_DEF2 MOD_DEF1 MOD_DEF0 GPIO(X) GPIO(X) GP14 106.25 MHz Figure 3. Typical Application Configuration 3 4.7 K to 10 K 0.01 F 4.7 K to 10 K VCC,R 50 0.1 F 50 Rx_LOS REFCLK LASER DRIVER & SAFETY CIRCUITRY 100 VCC,R 4.7 K to 10 K RX[0:9] 0.01 F 4.7 K to 10 K 3.3 V 0.01 F 0.01 F AMPLIFICATION & QUANTIZATION 50 VCC,R EEPROM TX_FAULT Functional Data I/O A laser fault or a low VCC condition will activate the transmitter fault signal, TX_FAULT, and disable the laser. This signal is an open collector output (pull-up required on the host board); A low signal indicates normal laser operation and a high signal indicates a fault. The TX_FAULT will be latched high when a laser fault occurs and is cleared by toggling the TX_DISABLE input or power cycling the transceiver. The TX_FAULT is not latched for Low VCC. The transmitter fault condition can also be monitored via the two-wire serial interface (address A2h, byte 110, bit 2). Avago's AFCT-571xZ transceiver is designed to accept industry standard differential signals. The transceiver provides an AC-coupled, internally terminated data interface. Bias resistors and coupling capacitors have been included within the module to reduce the number of components required on the customer's board. Figure 2 illustrates the recommended interface circuit. Eye Safety Circuit Under normal operating conditions, the laser power will be maintained below the eye-safety limit. If the eye safety limit is exceeded at any time, a laser fault will occur and the TX_FAULT output will be activated. Receiver Section The receiver section for the AFCT-571xZ contains an InGaAs/InP photo detector and a preamplifier mounted in an optical subassembly. This optical subassembly is coupled to a post amplifier/decision circuit on a circuit board. The design of the optical subassembly provides better than 12 dB Optical Return Loss (ORL). Connection to the receiver is provided via a LC optical connector. RX_LOS The receiver section contains a loss of signal (RX_LOS) circuit to indicate when the optical input signal power is insufficient for Gigabit Ethernet compliance. A high signal indicates loss of modulated signal, indicating link failure such as a broken fiber or a failed transmitter. RX_LOS can be also be monitored via the two-wire serial (address A2h, byte 110, bit 1). 0.1 F 1 H VCCR 3.3 V SFP MODULE 10 F 0.1 F HOST BOARD Figure 4. MSA required power supply filter 4 The AFCT-571xZ family complies with the SFF-8074i specification, which defines the module's serial identification protocol to use the 2-wire serial CMOS EEPROM protocol of the ATMEL AT24C01A or similar. Standard SFP EEPROM bytes 0-255 are addressed per SFF-8074i at memory address 0xA0 (A0h). As an enhancement to the conventional SFP interface defined in SFF-8074i, the AFCT-5715Z is also compliant to SFF-8472 (the digital diagnostic interface for SFP). This enhancement adds digital diagnostic monitoring to standard SFP functionality, enabling failure prediction, fault isolation, and component monitoring capabilities. Using the 2-wire serial interface, the AFCT-5715Z provides real time access to transceiver internal supply voltage and temperature, transmitter output power, laser bias current and receiver average input power, allowing a host to predict system compliance issues. These five parameters are internally calibrated, per the MSA. New digital diagnostic information is accessed per SFF-8472 using EEPROM bytes 0-255 at memory address 0xA2 (A2h). The digital diagnostic interface also adds the ability to disable the transmitter (TX_DISABLE), monitor for Transmitter Faults (TX_FAULT) and monitor for Receiver Loss of Signal (RX_LOS). Contents of the MSA-compliant serial ID memory are shown in Tables 10 through 14. The SFF-8074i and SFF8472 specifications are available from the SFF Committee at http://www.sffcommittee.org. 1 H VCCT 0.1 F Digital Diagnostic Interface and Serial Identification 10 F Predictive Failure Identification The diagnostic information allows the host system to identify potential link problems. Once identified, a failover technique can be used to isolate and replace suspect devices before system uptime is impacted. Compliance Prediction Operating Temperature The real-time diagnostic parameters can be monitored to alert the system when operating limits are exceeded and compliance cannot be ensured. The AFCT-571xZ family is available in either Extended (-10 to +85C) or Industrial (-40 to +85C) temperature ranges. Fault Isolation Power Supply Noise The diagnostic information can allow the host to pinpoint the location of a link problem and accelerate system servicing and minimize downtime. The AFCT-571xZ can withstand an injection of PSN on the VCC lines of 100 mV ac with a degradation in eye mask margin of up to 10% on the transmitter and a 1 dB sensitivity penalty on the receiver. This occurs when the product is used in conjunction with the MSA recommended power supply filter shown in Figure 3. Component Monitoring As part of the host system monitoring, the real time diagnostic information can be combined with system level monitoring to ensure system reliability. Application Support An Evaluation Kit and Reference Designs are available to assist in evaluation of the AFCT-571xZ SFPs. Please contact your local Field Sales representative for availability and ordering details. Regulatory Compliance The transceiver regulatory compliance is provided in Table 1 as a figure of merit to assist the designer. The overall equipment design will determine the certification level. Table 1. Regulatory Compliance Feature Test Method Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883C Method 3015.4 JEDEC/EIA JESD22-A114-A Class 2 (>2000 Volts) Electrostatic Discharge (ESD) to the Duplex LC Receptacle Bellcore GR1089-CORE 25 kV Air Discharge 10 Zaps at 8 kV (contact discharge) on the electrical faceplate on panel. Electromagnetic Interference (EMI) FCC Class B Applications with high SFP port counts are expected to be compliant; however, margins are dependent on customer board and chassis design. Immunity Variation of IEC 61000-4-3 No measurable effect from a 10 V/m field swept from 80 to 1000 MHz applied to the transceiver without a chassis enclosure. Eye Safety US FDA CDRH AEL Class 1 EN (IEC) 60825-1, 2, EN60950 Class 1 CDRH certification # 9521220-132 TUV file 933/21201880/12 Component Recognition Underwriter's Laboratories and Canadian Standards Association Joint Component Recognition for Information Technology Equipment Including Electrical Business Equipment UL file # E173874 ROHS Compliance 5 Less than 1000ppm of: cadmium, lead, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated biphenyl ethers Electrostatic Discharge (ESD) Eye Safety There are two conditions in which immunity to ESD damage is important: The AFCT-571xZ transceivers provide Class 1 eye safety by design. Avago Technologies has tested the transceiver design for regulatory compliance, under normal operating conditions and under a single fault condition. See Table 1. The first condition is static discharge to the transceiver during handling such as when the transceiver is inserted into the transceiver port. To protect the transceiver, it is important to use normal ESD handling precautions including the use of grounded wrist straps, work benches, and floor mats in ESD controlled areas. The ESD sensitivity of the AFCT-571xZ is compatible with typical industry production environments. The second condition is static discharge to the exterior of the host equipment chassis after installation. To the extent that the duplex LC optical interface is exposed to the outside of the host equipment chassis, it may be subject to system-level ESD requirements. The ESD performance of the AFCT-571xZ exceeds typical industry standards. Table 1 documents ESD immunity to both of these conditions. Electromagnetic Interference (EMI) Most equipment designs using the AFCT-571xZ SFPs are subject to the requirements of the FCC in the United States, CENELEC EN55022 (CISPR 22) in Europe and VCCI in Japan. The metal housing and shielded design of the transceiver minimize EMI and provide excellent EMI performance. EMI Immunity The AFCT-571xZ transceivers have a shielded design to provide excellent immunity to radio frequency electromagnetic fields which may be present in some operating environments. 6 Flammability The AFCT-571xZ family of SFPs is compliant to UL 94V0. Customer Manufacturing Processes This module is pluggable and is not designed for aqueous wash, IR reflow, or wave soldering processes. Caution The AFCT-571xZ contains no user-serviceable parts. Tampering with or modifying the performance of the AFCT-571xZ will result in voided product warranty. It may also result in improper operation of the transceiver circuitry, and possible over-stress of the laser source. Device degradation or product failure may result. Connection of the AFCT-571xZ to a non-approved optical source, operating above the recommended absolute maximum conditions may be considered an act of modifying or manufacturing a laser product. The person(s) performing such an act is required by law to re-certify and re-identify the laser product under the provisions of U.S. 21 CF. Table 2. Pin description Pin Name Function/Description Engagement Order(insertion) 1 VeeT Transmitter Ground 1 2 TX Fault Transmitter Fault Indication 3 1 3 TX Disable Transmitter Disable - Module disables on high or open 3 2 4 MOD-DEF2 Module Definition 2 - Two wire serial ID interface 3 3 5 MOD-DEF1 Module Definition 1 - Two wire serial ID interface 3 3 6 MOD-DEF0 Module Definition 0 - Grounded in module 3 3 7 Rate Selection Not Connected 3 8 LOS Loss of Signal 3 9 VeeR Receiver Ground 1 10 VeeR Receiver Ground 1 11 VeeR Receiver Ground 1 12 RD- Inverse Received Data Out 3 5 13 RD+ Received Data Out 3 5 14 VeeR Reciver Ground 1 15 VccR Receiver Power -3.3 V 5% 2 6 16 VccT Transmitter Power -3.3 V 5% 2 6 17 VeeT Transmitter Ground 1 18 TD+ Transmitter Data In 3 7 19 TD- Inverse Transmitter Data In 3 7 20 VeeT Transmitter Ground 1 Notes 4 Notes: 1. TX Fault is an open collector/drain output which should be pulled up externally with a 4.7K - 10 K resistor on the host board to a supply 2.97 V VCC > 2.97 V Tx_FAULT Tx_FAULT Tx_DISABLE Tx_DISABLE TRANSMITTED SIGNAL TRANSMITTED SIGNAL t_init t_init t-init: TX DISABLE NEGATED t-init: TX DISABLE ASSERTED VCC > 2.97 V Tx_FAULT Tx_FAULT Tx_DISABLE Tx_DISABLE TRANSMITTED SIGNAL TRANSMITTED SIGNAL t_off t_on t_init INSERTION t-init: TX DISABLE NEGATED, MODULE HOT PLUGGED t-off & t-on: TX DISABLE ASSERTED THEN NEGATED OCCURANCE OF FAULT OCCURANCE OF FAULT Tx_FAULT Tx_FAULT Tx_DISABLE Tx_DISABLE TRANSMITTED SIGNAL TRANSMITTED SIGNAL t_reset t_fault * CANNOT READ INPUT... t-fault: TX FAULT ASSERTED, TX SIGNAL NOT RECOVERED t_init* t-reset: TX DISABLE ASSERTED THEN NEGATED, TX SIGNAL RECOVERED OCCURANCE OF FAULT Tx_FAULT LOS TRANSMITTED SIGNAL t_fault t_loss_on t_reset * SFP SHALL CLEAR Tx_FAULT IN t_init IF THE FAILURE IS TRANSIENT t-fault: TX DISABLE ASSERTED THEN NEGATED, TX SIGNAL NOT RECOVERED t_init* t-loss-on & t-loss-off Figure 5. Transceiver Timing Diagrams (Module Installed Except Where Noted) 11 OCCURANCE OF LOSS OPTICAL SIGNAL Tx_DISABLE t_loss_off Table 10. EEPROM Serial ID Memory Contents - Page A0h Byte # Data Notes Decimal Hex Byte # Data Decimal Hex Notes 0 03 SFP physical device 37 00 Hex Byte of Vendor OUI (note 3) 1 04 SFP function defined by serial ID only 38 17 Hex Byte of Vendor OUI (note 3) 2 07 LC optical connector 39 6A Hex Byte of Vendor OUI (note 3) 3 00 40 41 "A" - Vendor Part Number ASCII character 4 00 41 46 "F" - Vendor Part Number ASCII character 5 00 6 02 7 8 42 43 "C" - Vendor Part Number ASCII character 43 54 "T" - Vendor Part Number ASCII character 00 44 2D "-" - Vendor Part Number ASCII character 00 45 35 "5" - Vendor Part Number ASCII character 1000BASE-LX 9 00 46 37 "7" - Vendor Part Number ASCII character 10 00 47 31 "1" - Vendor Part Number ASCII character 11 01 Compatible with 8B/10B encoded data 48 Note 4 12 0C 1200 MBit/sec nominal bit rate 49 Note 4 13 00 50 Note 4 14 0A 51 Note 4 15 64 16 37 Note 1 17 37 Note 2 54 20 " " - Vendor Part Number ASCII character 18 00 55 20 " " - Vendor Part Number ASCII character 19 00 56 20 " " - Vendor Revision Number ASCII character 52 20 " " - Vendor Part Number ASCII character 53 20 " " - Vendor Part Number ASCII character 20 41 "A" - Vendor Name ASCII character 57 20 " " - Vendor Revision Number ASCII character 21 56 "V" - Vendor Name ASCII character 58 20 " " - Vendor Revision Number ASCII character 22 41 "A" - Vendor Name ASCII character 59 20 " " - Vendor Revision Number ASCII character 23 47 "G" - Vendor Name ASCII character 60 05 Hex Byte of Laser Wavelength (Note 5) Hex Byte of Laser Wavelength (Note 5) 24 4F "O" - Vendor Name ASCII character 61 1E 25 20 " " - Vendor Name ASCII character 62 00 26 20 " " - Vendor Name ASCII character 63 Checksum for Bytes 0-62 (Note 6) 27 20 " " - Vendor Name ASCII character 64 00 28 20 " " - Vendor Name ASCII character 65 1A Hardware SFP TX_DISABLE, TX_FAULT & RX_LOS 29 20 " " - Vendor Name ASCII character 66 00 30 20 " " - Vendor Name ASCII character 67 00 31 20 " " - Vendor Name ASCII character 68-83 32 20 " " - Vendor Name ASCII character 84-91 Vendor Date Code ASCII characters (Note 8) 33 20 " " - Vendor Name ASCII character 92 Note 4 34 20 " " - Vendor Name ASCII character 93 Note 4 35 20 " " - Vendor Name ASCII character 94 Note 4 36 00 Vendor Serial Number ASCII characters (Note7) 95 96 - 255 Checksum for Bytes 64-94 (Note 6) 00 Notes: 1. Link distance with 50/125 m cable. 2. Link distance with 62.5/125 m. 3. The IEEE Organizationally Unique Identifier (OUI) assigned to Avago Technologies is 00-17-6A (3 bytes hex). 4. See Table 11 on following page for part number extensions and data-fields. 5. Laser wavelength is represented in 16 unsigned bits. The hex representation of 1310 (nm) is 051E. 6. Addresses 63 and 95 are checksums calculated (per SFF-8472 and SFF-8074) and stored prior to product shipment. 7. Addresses 68-83 specify the ASCII serial number and will vary on a per unit basis. 8. Addresses 84-91 specify the ASCII date code and will vary on a per date code basis. 12 Table 11. Part Number Extensions and Datafields AFCT-5710ALZ Address Hex ASCII AFCT-5710APZ Address Hex ASCII AFCT-5710LZ Address Hex ASCII AFCT-5710PZ Address Hex ASCII 48 30 0 48 30 0 48 30 0 48 30 0 49 41 A 49 41 A 49 4C L 49 50 P 50 4C L 50 50 P 50 5A Z 50 5A Z 51 5A Z 51 5A Z 51 20 51 20 92 0 92 0 92 0 92 0 93 0 93 0 93 0 93 0 94 0 94 0 94 0 94 0 AFCT-5715ALZ AFCT-5715APZ AFCT-5715LZ AFCT-5715PZ Address Hex ASCII Address Hex ASCII Address Hex ASCII Address Hex ASCII 48 35 5 48 35 5 48 35 5 48 35 5 49 41 A 49 41 A 49 4C L 49 50 P 50 4C L 50 50 P 50 5A Z 50 5A Z Z Z 13 51 5A 51 5A 51 20 51 20 92 68 92 68 92 68 92 68 93 F0 93 F0 93 F0 93 F0 94 1 94 1 94 1 94 1 Table 12. EEPROM Serial ID Memory Contents - Address A2h (AFCT-5715Z family only) Byte # Notes Decimal Byte # Decimal Notes Byte # Decimal Notes 0 Temp H Alarm MSB1 26 Tx Pwr L Alarm MSB4 104 Real Time Rx PAV MSB5 1 Temp H Alarm LSB1 27 Tx Pwr L Alarm LSB4 105 Real Time Rx PAV LSB5 2 Temp L Alarm MSB1 28 Tx Pwr H Warning MSB4 106 Reserved 107 Reserved 108 Reserved 109 Reserved 110 Status/Control - see Table 13 111 Reserved 112 Flag Bits - see Table 14 113 Flag Bit - see Table 14 3 Temp L Alarm LSB 1 29 4 Temp H Warning MSB 5 1 Temp H Warning LSB 6 Temp L Warning MSB 7 Temp L Warning LSB1 8 VCC H Alarm MSB 9 2 VCC H Alarm LSB 1 2 2 10 VCC L Alarm MSB 11 VCC L Alarm LSB 2 12 VCC H Warning MSB2 13 1 VCC H Warning LSB 2 2 Tx Pwr H Warning LSB 4 30 Tx Pwr L Warning MSB 31 Tx Pwr L Warning LSB 4 32 Rx Pwr H Alarm MSB 5 33 Rx Pwr H Alarm LSB5 34 Rx Pwr L Alarm MSB 35 5 4 5 Rx Pwr L Alarm LSB 5 36 Rx Pwr H Warning MSB 114 Reserved 37 Rx Pwr H Warning LSB 5 115 Reserved 38 Rx Pwr L Warning MSB5 116 Flag Bits - see Table 14 117 Flag Bits - see Table 14 5 39 Rx Pwr L Warning LSB 40-55 Reserved 118 Reserved 56-94 External Calibration Constants6 119 Reserved 120-122 Reserved 14 VCC L Warning MSB 15 VCC L Warning LSB 2 16 Tx Bias H Alarm MSB3 95 Checksum for Bytes 0-947 17 Tx Bias H Alarm LSB3 96 Real Time Temperature MSB1 123 18 Tx Bias L Alarm MSB3 97 Real Time Temperature LSB1 124 19 Tx Bias L Alarm LSB3 98 Real Time Vcc MSB2 3 20 Tx Bias H Warning MSB 21 Tx Bias H Warning LSB 3 22 Tx Bias L Warning MSB3 23 3 Tx Bias L Warning LSB 4 24 Tx Pwr H Alarm MSB 25 4 Tx Pwr H Alarm LSB 99 125 2 Real Time Vcc LSB 126 3 100 Real Time Tx Bias MSB 101 Real Time Tx Bias LSB3 4 102 Real Time Tx Power MSB 103 4 Real Time Tx Power LSB 127 Reserved8 128-247 Customer Writable9 248-255 Vendor Specific Notes: 1. Temperature (Temp) is decoded as a 16 bit signed twos compliment integer in increments of 1/256 C. 2. Supply voltage (VCC) is decoded as a 16 bit unsigned integer in increments of 100 V. 3. Laser bias current (Tx Bias) is decoded as a 16 bit unsigned integer in increments of 2 A. 4. Transmitted average optical power (Tx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 W. 5. Received average optical power (Rx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 W. 6. Bytes 55-94 are not intended from use with AFCT-5715xxxx, but have been set to default values per SFF-8472. 7. Bytes 95 is a checksum calculated (per SFF-8472) and stored prior to product shipment. 8. Byte 127 accepts a write but performs no action (reserved legacy byte). 9. Bytes 128-247 are write enabled (customer writable). 14 Table 13. EEPROM Serial ID Memory Contents - Address A2h, Byte 110 (AFCT-5715Z family only) Bit # Status/Control Name Description 7 Tx Disable State Digital state of SFP Tx Disable Input Pin (1 = Tx_ Disable asserted) 6 Soft Tx Disable Read/write bit for changing digital state of SFP Tx_Disable function1 5 Reserved 4 Rx Rate Select State 3 Reserved 2 Tx Fault State Digital state of the SFP Tx Fault Output Pin (1 = Tx Fault asserted) 1 Rx LOS State Digital state of the SFP LOS Output Pin (1 = LOS asserted) 0 Data Ready (Bar) Indicates transceiver is powered and real time sense data is ready (0 = Ready) Digital state of SFP Rate Select Input Pin (1 = full bandwidth of 155 Mbit)2 Notes: 1. Bit 6 is logic OR'd with the SFP Tx_Disable input pin 3 ... either asserted will disable the SFP transmitter. 2. AFCT-5715Z does not respond to state changes on Rate Select Input Pin. It is internally hardwired to full bandwidth. Table 14. EEPROM Serial ID Memory Contents - Address A2h, Bytes 112, 113, 116, 117 (AFCT-5715Z family only) Byte Bit # Flag Bit Name Description 112 7 Temp High Alarm Set when transceiver nternal temperature exceeds high alarm threshold. 6 Temp Low Alarm Set when transceiver internal temperature exceeds alarm threshold. 5 VCC High Alarm Set when transceiver internal supply voltage exceeds high alarm threshold. 4 VCC Low Alarm Set when transceiver internal supply voltage exceeds low alarm threshold. 3 Tx Bias High Alarm Set when transceiver laser bias current exceeds high alarm threshold. 2 Tx Bias Low Alarm Set when transceiver laser bias current exceeds low alarm threshold. 1 Tx Power High Alarm Set when transmitted average optical power exceeds high alarm threshold. 0 Tx Power Low Alarm Set when transmitted average optical power exceeds low alarm threshold. 7 Rx Power High Alarm Set when received P_Avg optical power exceeds high alarm threshold. 6 Rx Power Low Alarm Set when received P_Avg optical power exceeds low alarm threshold. 0-5 Reserved 7 Temp High Warning Set when transceiver internal temperature exceeds high warning threshold. 6 Temp Low Warning Set when transceiver internal temperature exceeds low warning threshold. 5 VCC High Warning Set when transceiver internal supply voltage exceeds high warning threshold. 4 VCC Low Warning Set when transceiver internal supply voltage exceeds low warning threshold. 3 Tx Bias High Warning Set when transceiver laser bias current exceeds high warning threshold. 2 Tx Bias Low Warning Set when transceiver laser bias current exceeds low warning threshold. 1 Tx Power High Warning Set when transmitted average optical power exceeds high warning threshold. 0 Tx Power Low Warning Set when transmitted average optical power exceeds low warning threshold. 7 Rx Power High Warning Set when received P_Avg optical power exceeds high warning threshold. 9 Rx Power Low Warning Set when received P_Avg optical power exceeds low warning threshold. 0-5 Reserved 113 116 117 15 AFCT-571xZ 1310 nm LASER PROD 21CFR(J) CLASS 1 COUNTRY OF ORIGIN YYWW XXXXXX 13.80.1 [0.5410.004] 13.40.1 [0.5280.004] 2.60 [0.10] DEVICE SHOWN WITH DUST CAP AND BAIL WIRE DELATCH 55.20.2 [2.170.01] FRONT EDGE OF SFP TRANSCEIVER CAGE 6.250.05 [0.2460.002] 0.7MAX. UNCOMPRESSED [0.028] 13.00.2 [0.5120.008] TX 8.50.1 [0.3350.004] RX AREA FOR PROCESS PLUG 6.6 [0.261] 13.50 [0.53] 14.8 MAX. UNCOMPRESSED [0.583] STANDARD DELATCH 12.10.2 [0.480.01] Figure 6. Drawing of SFP Transceiver 16 DIMENSIONS ARE IN MILLIMETERS (INCHES) X Y 34.5 10 3x 7.2 10x ! 1.05 0.01 ! 0.1 L X A S 1 16.25 MIN.PITCH 7.1 2.5 B PCB EDGE ! 0.85 0.05 ! 0.1 S X Y A 1 3.68 2.5 5.68 20 PIN 1 8.58 16.25 14.2511.08 REF. 2x 1.7 8.48 9.6 4.8 11 10 2.0 11x 11x 2.0 5 26.8 10 3x 3 11.93 SEE DET AIL 1 9x 0.95 0.05 ! 0.1 L X A S 2 41.3 42.3 3.2 5 20x 0.5 0.03 0.06 L A S B S 0.9 PIN 1 9.6 LEGEND 20 10.53 10.93 0.8 TYP. 10 11.93 2. THROUGH HOLES, PLATING OPTIONAL 11 3. HATCHED AREA DENO TES COMPONENT AND TRACE KEEPOUT (EXCEPT CHASSIS GROUND) 4 2x 1.55 0.05 ! 0.1 L A S B S DETAIL 1 2 0.005 TYP. 0.06 L A S B S Figure 7. SFP host board mechanical layout 17 1. PADS AND VIAS ARE CHASSIS GROUND 4. AREA DENOTES COMPONENT KEEPOUT (TRA CES ALLO WED) DIMENSIONS ARE IN MILLIMETERS 1.70.9 3.50.3 [.07.04] [.14.01] 41.730.5 PCB [1.64.02] BEZEL AREA FOR PROCESS PLUG 15MAX [.59] Tcase REFERENCE POINT CAGE ASSEMBLY 15.250.1 [.600.004] 10.40.1 [.410.004] 12.4REF [.49] 9.8MAX [.39] 1.15REF [.05] BELOW PCB 10REF [.39] TO PCB 0.40.1 [.020.004] BELOW PCB 16.250.1MIN PITCH [.640.004] MSA-SPECIFIED BEZEL DIMENSIONS ARE IN MILLIMETERS [INCHES]. Figure 8. Assembly Drawing 18 Ordering Information Please contact your local field sales engineer or one of Avago Technologies franchised distributors for ordering information. For technical information, please visit Avago Technologies' web-page at www.avagotech.com or contact one of Avago Technologies' regional Technical Response Centers. For information related to SFF Committee documentation visit www.sffcommittee.org. AFCT-5715LZ DMI Extended Temperature (-10C to 85C) Standard Delatch AFCT-5715PZ DMI Extended Temperature (-10C to 85C) Bail Delatch AFCT-5715ALZ DMI Industrial Temperature (-40C to 85C) Standard Delatch AFCT-5715APZ DMI Industrial Temperature (-40C to 85C) Bail Delatch AFCT-5710LZ No DMI Extended Temperature (-10C to 85C) Standard Delatch AFCT-5710PZ No DMI Extended Temperature (-10C to 85C) Bail Delatch AFCT-5710ALZ No DMI Industrial Temperature (-40C to 85C) Standard Delatch AFCT-5710APZ No DMI Industrial Temperature (-40C to 85C) Bail Delatch For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright (c) 2006 Avago Technologies Pte. All rights reserved. AV01-0167EN - May 11, 2006 19