A
B
C
D
1234
1234
A
B
Copyright FCI.
REV F - 2006-04-17
C
D
sheet 7 of 7
CUSTOMER-
catalog no
BX
70218
dwg no
1 MOD, 4 ROW PRESS-FIT
title
Rev.
METRAL SIGNAL HEADER
*Spec refMETRALProduct family02/29/00M.STRAWSER
Appr
*ECN
.0510.XXX
LINEAR
20
01/24/00M.STRAWSER
Chr
53:50
A4
0.130.XX
ANGULAR
01/24/00M.STRAWSER
Eng
Scale
size
0.30.X
01/24/00T.BRUNGARD
Dr
TOLERANCES UNLESS OTHERWISE SPECIFIED
www.fciconnect.com mm
ISO 1101ISO 406ISO 1302
projection
tolerance std3.200surface
NOTES:
1. FOR DIM A AND B SEE SHEET 2 AND UP.
2. BODY MATERIAL: LIQUID CRYSTAL
POLYMER 30 % GLASS.
FLAME RETARDANT ACC. UL 94-V0.
3. PIN MATERIAL:
PHOSPHOR BRONZE.
4. PLATING ON PRESS-FIT TAIL:
70218 -XYY IS SnPb
70218-XYYLF IS SN (LEAD FREE)
PLATING ON CONTACT AREA CONFORMS TO PERFORMANCE
LEVEL SHOWN IN TABLE.
5. PRODUCT MARKING:
PART NUMBER DESIGNATION & BATCH I.D.
6. ALL PRODUCTS WITH PART NUMBERS SHOWN IN
SUBSEQUENT TABLES WILL BE PACKAGED IN TUBES.
IF TRAY PACKAGING IS REQUIRED, A SUFFIX "P"
WILL BE ADDED TO THE END OF THE PART NUMBER.
EXAMPLE: XXXXX-XXXP OR XXXXX-XXXPLF
7. PRODUCT SPECIFICATION GS-12-180
APPLICATION SPECIFICATION BUS-20-073
8. AFTER INSERTION INTO CIRCUIT BOARD WITH
QUALIFIED TOOL.
9. -A PLATING HAS Au FLASH IN PRESS FIT
AREA (LEAD FREE).
10. THE PRODUCTS WHERE THE PART NUMBER ENDS IN LF MEET THE
EUROPEAN UNION DIRECTIVES AND OTHER COUNTRY REGULATIONS
AS DESCRIBED IN GS-22-008.
11. FOR LEAD FREE PART NUMBERS, ADD AN "LF" SUFFIX.
EXAMPLE: 70218-X01LF
12. ALL PRODUCTS EXCEPT THOSE WITH PART NUMBERS CONTAINING
(DRAWING NO.)-N1--- OR (DRAWING NO.)-N5---WILL WITHSTAND EXPOSURE
T0 260 C FOR 60 SECONDS IN A CONVECTION, INFRA-RED OR
VAPOR PHASE REFLOW OVEN. PART NUMBERS (DRAWING N0.)-N1---
AND (DRAWINGS NO.)-N5---WILL NOT WITHSTAND REFLOW AND Au CONTACT
SURFACE OF THE CONTACTS SHALL BE EXPOSED TO A MAXIMIM 140 C FOR
NO LONGER THAN 15 SECONDS IN A WAVE SOLDER APPLICATION.
BX
METRAL
P/N ROW
CONTACT CODE
MOD. 1
123456
70218-X121
SEE NOTE 11
LEAD FREE
OPTION
D 2 2 3 19 1 19
C 2 2 3 19 2 19
B 2 2 3 19 19 2
A 2 2 3 19 19 3
PDM: Rev:BX Released .STATUS: Printed: Jan 17, 2011