80 and 100 W
-
10 Nm
-
Right
-
angle gearbox 801810 TNi20
-
PWM Part number Contact us
With or without integrated control electronics
Output perpendicular to motor
Ideal for short reduction ratios
Ideal for very compact applications
Silent operation
Non-reversible movement at high ratios
Part numbers
Type
With built-in electronic control
Without built-in control, with Hall effect sensors
Output speed (rpm) 24 V DC
Available torque (Nm)
80181002
801810 TNi20
-
PWM
TNi20
-
325
1,7
Specifications
General characteristics
Motor
801800
Nominal motor power at 24 V (W)
80
Speed control
PWM
Axial load dynamic (N)
100
Radial load dynamic (N)
150
Temperature rise at 50 % cycle (°C)
45
Weight (g)
1920
Protection index
IP54
Dimensions (mm)
801810 with built-in TNi20
N
o
Legend
4 x M5 over depth 8 mm
Length of cable 500
±
5 mm
4 x M4 over Ø 36 depth 8 mm
4 x M5 depth 8 mm
Precautions for use
The limits and precautions for use described in the 80 W brushless motor section must be observed.
Continuous use may cause the gearbox to overheat.
This geared motor is recommended for applications in which the operating time does not exceed 50 % of the total time. For longer times, please consult us.
Product adaptations
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
02/11/2015 www.crouzet.com
2-quadrant speed regulation
With built
-
in electronic card TNi20
No lead output but connector in motor
Dimensions of gearbox shaft
Cable length, with or without connector
Other reduction ratios
Other windings
Mechanical holding brake
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
02/11/2015 www.crouzet.com