.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
DECIMALS ANGLES
TOLERANCES ARE:
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
DO NOT
SCALE FROM
THIS PRINT
SQW-1XX-01-XXX-D-VS-XX-XXX
No OF POSITIONS
-02 THRU -50
(PER ROW)
TAIL STYLE
-VS: VERTICAL
LEAD STYLE
-01
PLATING SPECIFICATION
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA
TIN/LEAD (93/7+/-5%) TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
OPTION
-A: STAKED & MOLDED IN ALIGNMENT PIN
(5 POS MIN) (USE SM-A8H, SEE FIG 3, SHT 2)
-LC: LOCKING CLIP (5 POS MIN)
(USE LC-07-TM, SEE FIG 4, SHT 2 & NOTE 8)
-P: PICK & PLACE PAD (4 POS MIN)
(USE LMP-03, SEE FIG 6, SHT 2)
-TR: TAPE & REEL
(AVAILABLE POS 4 THRU 28)
-K: POLYAMIDE FILM PAD (4 POS MIN)
(USE K-500-300, SEE FIG 7, SHT 2)
(.005 [.13] THICKNESS WITH SILICONE ADHESIVE)
ROW SPECIFICATION
-D: DOUBLE (USE SQW-XX-D)
-XXX: INDICATES POSITION POLARIZED
(USE PK-07-N, SEE FIG 2, SHT 2)
POLARIZATION OPTION
AE
.015 0.38
REF
.203 5.16
REF
.0197
REF (TYP)
0.500
.250 6.35
REF
.059 1.50
REF
2
MAX SWAY
(EITHER DIRECTION)
C-97-01-XXX
FIG 1
SQW-110-01-XXX-D-VS
SHOWN
((No OF POS x .07874 [2.000]) + .0117 [.297])
.010 [.25]
(No OF POS x .07874 [2.000]) - .07874 [2.000] REF
.157 4.00
REF
.07874 2.0000
REF
2
MAX SWAY
(EITHER DIRECTION)
C
01
02
.0500 1.270
(SEE NOTE 7)
.034
REF
0.87
.015
REF
0.37
.187
REF
4.75
90°
-
0°
+
4°
SQW-XX-D
C
.006[.15]
.0900 2.286
C
IN-PROCESS
C
AE
AE
SHEET OF
MATERIAL:
2MM SOCKETS TRIP ASSEMBLY
BY:
SQW-1XX-01-XXX-D-VS-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
04/22/1997
3
1
SHEET SCALE: 4:1
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
TERMINAL: PHOSPHOR BRONZE
F:\DWG\MISC\MKTG\SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. POSITIONS -04 THRU -50 ARE TO BE TUBED.
3. POSITIONS 02 & 03 ARE TO BE LAYERED PACKAGED.
4. MAXIMUM CUT FLASH: .010[.25].
5. STAKED ALIGNMENT PIN USED AT SAMTECS DISCRETION.
6. MEASURE THE HEIGHT FROM THE EDGE, NOT THE BREAK OFF.
7. MEASURED AT BEND RADIUS, NOT END OF PIN.
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.
SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL
ASSEMBLIES WITH THE -LC OPTION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION AE
.035 0.89
(SEE NOTE 6)
SM-A8H
FIG 3
-A: STAKED ALIGNMENT PIN
(5 POS MIN)
SQW-110-01-XXX-D-VS-A
SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
AE
.0350
REF
0.889
FIG 5
-A: MOLDED ALIGNMENT PIN
(5 POS MIN)
SQW-110-01-XXX-D-VS-A
SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
AE
.056
REF
1.42
- .1575 [4.000]}
.002 [.51]
{(No OF POS x .07874 [2.000])
C
.050 1.27
.010
REF
0.25
LC-07-TM
FIG 4
-LC: LOCKING CLIP
(5 POS MIN)
SQW-110-01-XXX-D-VS-LC
SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
AE
.225
REF
5.72
+ .0117[.297]}/2} - .1125 [2.858]
{(No OF POS x .07874 [2.000])
.308 7.82
C
L
FIG 6
-P: PICK & PLACE PAD
(4 POS MIN)
SQW-110-01-XXX-D-VS-P
SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.202
REF
5.13
C
L
"R"(SEE NOTE)
"S"(SEE NOTE)
.1673
±.0050
4.250
±0.127
C
L
NOTE:
"R" = USED MEASURED DIMENSION (REF)
"S" = {("R" - .1673 [4.25]) / 2}±.020 [.51]
.305 7.75
C
L
FIG 7
POLYAMIDE FILM PAD
(4 POS MIN)
SQW-110-01-XXX-D-VS-K
SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
01
14 02
FIG 2
POLARIZATION OPTION LOCATION
INSERT PK-07-N INTO SPECIFIED
POSITION AND BREAK OFF TAB
SQW-110-01-XXX-D-VS-014 SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
AE
.0430
REF
1.092
- .1575 [4.000]}
.002 [.51]
{(No OF POS x .07874 [2.000])
C
SHEET OF
2MM SOCKETS TRIP ASSEMBLY
BY:
SQW-1XX-01-XXX-D-VS-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
04/22/1997
3
2
SHEET SCALE: 4:1
REVISION AE
F:\DWG\MISC\MKTG\SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
PT-1-24-03-09
TP-09
TUBE VIEW
AE
PARTS TO COME OFF REEL AS SHOWN
WITH POCKETS FACING UP
POSITION 1
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
TAPE & REEL VIEW
AE
UNWINDING DIRECTION
REEL
AE
UNWINDING DIRECTION
LOOSE END OF REEL
SHEET OF
2MM SOCKETS TRIP ASSEMBLY
BY:
SQW-1XX-01-XXX-D-VS-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
DEAN P
04/22/1997
3
3
SHEET SCALE: 4:1
REVISION AE
F:\DWG\MISC\MKTG\SQW-1XX-01-XXX-D-VS-XX-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
