Wire to Board Connectors EP Series (1.5mm Pitch) Mating Diagram Right-Angle Type Straight Type 3.5 4.0 4.5 6.0 8.3 Features 1. T his wire to board crimping connector has a mating height of 6.0mm (straight type) and 4.0mm (right-angle type) as well as a 1.5mm pitch. 2. The number of pins available are 2 to 15. 3. Plugs are available in straight and right-angle types. 4. The terminal features a tapered dimple design which highly resistant against fretting. 5. A locking structure is utilized for the socket and plug housing to ensure connection and prevent improper plug insertion. 1.3 1.5 P.C. Board Dimension ( t=0.8~1.2 ) (Pitch) {(n 1) 1.5 } 1.5 Specification n (Pitch) 1. Rating : 1A, 50V AC/DC 2. Contact Resistance : 20m max., initially 3. Insulation Resistance : 1000M min. at 500V DC 4. Withstanding Voltage : 500V AC (for one minute) 5. Operating Temperature Range : -25C to +85C Structural Configuration Diagram 4.5 5.25 6.0 3.5 1.3 22 0. 7 EP Series 1.5mm Pitch CTA1126-0101F o0.95 ~ 1.5 Cu Alloy Sn (Reflow Treatment) l Housing 15,000 B C 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CGP1202-0101 CGP1203-0101 CGP1204-0101 CGP1205-0101 CGP1206-0101 CGP1207-0101 CGP1208-0101 CGP1209-0101 CGP1210-0101 CGP1211-0101 CGP1212-0101 CGP1213-0101 CGP1214-0101 CGP1215-0101 1.5 3.0 4.5 6.0 7.5 9.0 10.5 12.0 13.5 15.0 16.5 18.0 19.5 21.0 3.7 5.2 6.7 8.2 9.7 11.2 12.7 14.2 15.7 17.2 18.7 20.2 21.7 23.2 4.0 5.5 7.0 8.5 10.0 11.5 13.0 14.5 16.0 17.5 19.0 20.5 22.0 23.5 No. of Pins Pin No.1 3.35 4.8 Pins 0.3 A -0101 5.3 Part No. 0.15 1.3 CGP 12 No. of 1.15 UL1007 AWG26 UL1061 AWG24 4.6 CTA1126-1001F 15,000 1.4 Cu Alloy 2.1 2.5 o0.54 ~ 0.9 1.15 32 ~ 26 2.1 4.6 CTA1126-0101F Sn (Reflow Treatment) 1.1 1.3 Plating 0.15 Material 1.4 Part No. 1.1 No. of Terminal/ Reel 2.5 Electrical Wire Sheath Dia. (mm) Applicable Electrical Wire Size (AWG) CTA1126-1001F 4.2 l Socket l Terminal 2.7 C B A Material and Plating l Housing : Thermoplastic Resin, Natural Color, 94V-0 0.5 1.5 (Pitch) CGP 16 Straight Type No. of Straight Type Right-Angle Type A B 1.5 3.0 4.5 6.0 7.5 9.0 10.5 12.0 13.5 15.0 16.5 18.0 19.5 21.0 4.3 5.8 7.3 8.8 10.3 11.8 13.3 14.8 16.3 17.8 19.3 20.8 22.3 23.8 B A 1.5(Pitch) 5.25 2.7 CGP1702-0101F CGP1703-0101F CGP1704-0101F CGP1705-0101F CGP1706-0101F CGP1707-0101F CGP1708-0101F CGP1709-0101F CGP1710-0101F CGP1711-0101F CGP1712-0101F CGP1713-0101F CGP1714-0101F CGP1715-0101F 7.95 CGP1602-0101F CGP1603-0101F CGP1604-0101F CGP1605-0101F CGP1606-0101F CGP1607-0101F CGP1608-0101F CGP1609-0101F CGP1610-0101F CGP1611-0101F CGP1612-0101F CGP1613-0101F CGP1614-0101F CGP1615-0101F No. of Pins 2.2 1.3 3.5 Pins 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -0101F 4.5 l Plug Pin No.1 Material and Plating Right-Angle Type CGP 17 -0101F No. of Pins 6.75 5.25 l Plug Pin : Cu Alloy, Sn Plating (Reflow Treatment) Pin No.1 1.5 l Housing : Thermoplastic Resin, Natural Color, 94V-0 A B 23