AMD, AMK, AND Series Wire Wrap and Round Tail Dip Solder Terminations SPECIFICATIONS ELECTRICAL Operating Voltage: 1800 Vdc (sea level) Current Rating: 3 amp max. Dielectric Withstanding Voltage: 1800 Vrms min. Insulation Resistance: 5000 megohms min. Voltage Drop: 30 mV max. TEMPERATURE RANGE Diallyl Phthalate & Phenolic: - 65C to +125C (-85F to +257F) Polyester: -65C to +105C (-85F to +221F) MECHANICAL Contact Retention: Wire Wrap 8 lbs. min.; Dip Solder 3 Ibs min. Insertion Force: 2 to 10 oz. per opposing contact pair when using .062 (1.57) steel test blade Withdrawal Force: 1 oz. min. per opposing contact pair when using .054 (1.37) steel test blade MATERIALS INSULATOR: Diallyl Phthalate, per MIL-M-14, U.L. 94V-0 approved, color green Phenolic, glass reinforced per MIL-M-14, type MFH, U.L. 94V-0 approved, color black Thermoplastic Polyester, glass rein- forced, U.L. 94V-0 approved, color black CONTACTS: Copper alloy, gold plated per MIL-G- 45204, Type Il, Grade C, over nickel INSERTS: Stainless steel, passivated NOTE: All tests are in accordance with requirements of MIL-C-21097. CONTACT TERMINATIONS DIP SOLDER WRAP POST "G" DIMENSIONS | 4 .200 + 025 G Std. (5.08) (.64) Moet 0 square 300 os YP Mod Code 165 + 025 ! [ei a20iTve (6.08) (64) [081] (4.18) (60 [@]@ .020|TYR579 + .025 TYR Dip ooerd Terminations ress ces ny + (en (14.48) (.64) 002(.05) diameter and fit . . in. CODE MK 4 WITH STANDOFF: CODE MD diameter board hole. WITHOUT STANDOFF: CODE ND MOUNTING STYLES @ 125 (3.18) 112-40 6.125 /% (i548) _2 WaERY 8 FLT |] 250 | 1. LiL} 639) | S| t oso ' (1.52) FLUSH MOUNT THREADED INSERT THRU HOLE NO EARS CODE 1 CODE 3 CODE 5 CODE 12 ORDERING 2 KT 43 2 A MK 12 INFORMATION / fl POLARIZATION | ceRMANATION MODIFIER 2: Between-Contacts (081): Dip Solder .165 tail length CONTACT PLATING " MOUNTING STYLES KH:.000010 gold engagement 1: Flush Mount; and termination area KT: .000010 gold engagement area; .000100 min. tin lead termination area V#H:.000030 gold engagement area and termination area VNz.000030 gold engagement area; .000010 gold termination area VT: .000030 gold engagement area; .000100 min. tin lead termination area NUMBER OF CONTACT PAIRS 22, 28, 36, 43 INSULATOR MATERIAL 1: Diallyl Phthalate (green); Standard with VH, VN, and VT platings Not available with KT plating 2: Polyester (black); Standard with KH, KT, VN, and VT platings Not available with VH plating 9: Phenolic (black); Not available with KT plating MB 9005374 O0000c4 493 Standard with MK termination only 3: Threaded Insert 5: Thru Hole 12: No Ears; Standard with MK termination, 43 position only CONTACT TERMINATIONS MD: Wrap Post (Standoff) ND: Wrap Post MK: Dip solder SERIES IDENTIFIER A: .156 (3.96) Contact Centers .062 (1.57) P.C. Board. Standard options are indicated by bold italic type. Nonstandard items require a factory quotation for price and delivery. 28.156 Contact Centers (3.96 mm) -156 x .200 grid The popular 43 position connector used in Intel Multibus | systems is included in the AMK Series. This round tail dip solder connector has the reliable and cost effective semi-bellows contact. The in- sulator body includes standoffs to facilitate cleaning after soldering. A 3 level Wire Wrap termination is also available in the AMD Series. The AND Series is of identical design and construction with the exceptions that there are no standoffs and the card slot is smaller by .018". OUTLINE AND DIMENSIONS 180 .060 SQ A 9 060 (4.57) (1.52) (1.52) i da Lt i j (13.97) .250 .390 4 (6.35) .060 een T 1B tT (1.52} 4 4 (2.87) 1 SEE CONTACT STANDOFFS TERMINATIONS AMR AMO |] ~ c SERIES ONLY LBge F _____= D E 084-.071 RC. BOARD | 37}(1.80) _t i: ON [o n 98 3 ( aa & ji 0 | f\izeqnere oe oF Contact Identification for 22 thru 31 sizes AND: Numbers: 1, 2, 3... 22, 23, ere 31 Letters: A, B, Cre 2, Ay eee K Omit! G,1,0,,G,1 [zeairve Contact Identification for 36 thru 43 size AND: Letters: A, B, C,....... Z, AG evenness Y Numbers; 1, 2, 3, .sec1022, 23, cece 43 Omit! G,1,0,0,G,1,0, POLARIZATION weg . Between-Contacts Contact Identification for 22 thru 43 size AMD, AMK: GP Polarizing Key Numbers: 1, 3, 5,......... 85 Part No. 091-0024-000 a 86 See page 34 for further AMD, AMK SERIES information. A B Cc D E F ONIONS BSC +.007 +.015 +.010 +.015 +.015 (+.18) (+.38) (+.25) (.38) (+.38) 22/44 3.276 3.596 3.748 4.030 4.348 3.488 (83.21) (91.34) (95.20) (102.36) (110.44) (88.60) 28/56 4.212 4.532 4.684 4.966 5.284 4.424 (106.98) (115.11) (118.97) (126.14) (134.21) (112.37) 36/72 .460 5.780 5.932 6.214 6.532 5.672 (138.68) (146.81) (150.67) (157.84) (165.91) (144.07) 43/86 6.552 6.872 7.024 7.306 7.624 6.764 (166.42) (174.55) (178.41) (185.57) (193.65) (171.81) AND SERIES A B Cc D E F CONTAC BSC +.007 +.015 +.010 +.015 +.015 (+.18) (+.38) (+.25) (+.38) (4.38) 22/44 3.276 3.578 3.717 4.030 4.280 3.526 (83.21) (90.88) (94.41) (102.36) (108.71) (89.56) 28/56 4.212 4.514 4.653 4.966 .216 4.462 (106.98) (114.66) (118.19) (126.14) (132.49) (113.33) 36/72 5.460 5.762 5.901 6.214 6.464 5.710 (138.68) (146.35) (149.89) (157.84) (164.19) (145.03) 43/86 6.552 6.854 6.993 7.306 7.556 6.802 (166.42) (174.09) (177.62) (185.57) (191.92) (172.77) Note: Dimensions are in inches and (millimeters). Tolerance +.010(.25) unless otherwise specified. 27 Me 9005376 OO000e? 55?Hoods with Cable Clamp Hoods are available for most Viking card-edge connectors with style 5 mounts and suitable contact termination lengths. They are molded in thermoplastic and feature an integral cable clamp for a right-angle cable outlet. The cable clamp has a screw adjustment and accommodates cable sizes from 3/16"(4.76) diameter to 3/8"(9.52) diameter. A hood assembly consists of two main parts, one of which "telescopes" into the other, thus fitting various lengths of connectors. Three different widths (Dim. "A") are available to suit the various connector series. The hood is secured with two self-tapping screws which are provided. Consult the table to find the correct hood part number for your connector series and size. OUTLINE AND DIMENSIONS 3/16" TO 3/8" CABLE OUTLET STELESCOPE 7] 1524 _ (4.76) _(9.52) AT THIS POINT ~y I (26.40) (ies) SL ye Oo \ expo spas alak CONNECTOR (REF) x x ~ (2) -@ J] | L Sa SSS SS See aeaes ~ MOUNTING HOLES @ PES) FOR NO. 4 LF TAPPING SCREWS ot 8 3 8 MOUNTING HOLE (SEE PAGE OF SERIES AND SIZE TO BE USED) CABLE CLAMP SCREW , 3 __t CABLE CLAMP. TE { 10 (2.79) SECTION X-X Connector Series OR Fernow Pathe Perhow batho Perkew patho. Ferkew_"batiNo LV, LZ 330 25-30 036-0097-004 40 036-0097-003 64 036-0097-002 JDD, JE, JN, JV 330 10 036-0097-004 15-25 036-0097-003 28-35 036-0097-002 36-50 036-0097-001 JND, JNK 375 18-25 036-0098-003 28-36 036-0098-002 40-50 036-0098-001 CDD, CE, CN,CV 330 10-18 036-0097-003 22-28 036-0097-002 31-50 036-0097-001 CND, CNK 375 10-18 036-0098-003 22-30 036-0098-002 31-50 036-0098-001 HNG -400 18 036-0099-002 28-31 036-0099-001 AB, ADD, AE, AK, AN, AV 330 6 036-0097-004 10-15 036-0097-003 18-22 036-0097-002 AMD, AMK, AND 400 22 036-0099-002 = 28-43 036-0099-001 Note: Dimensions are in inches and (millimeters). Tolerance +.010(.25) unless otherwise specified. $3 M@@ 9005376 0000033 450 aMost Viking card-edge connectors have the option of "between- contacts polarization or "in-contact polarization. Connectors with part number prefix "2" or "3" have grooves or slots between contacts into which the polarizing key is pressed. The appropriate "between-contacts" polarizing key is referenced on the data pages for each series. A Viking part number which Polarizing Keys does not have a prefix of "2" or "3" does not have the "between- contacts polarizing option. If "in-contact" polarizing is desired, a pair of contacts must be removed and replaced by a key as detailed below. Therefore, two circuits are removed in the case of dual "readout" connectors and one circuit is removed in the case of single row connectors. BETWEEN-CONTACTS IN-CONTACT All .100", .125" Contact Centers JDD, JE, JN, JV Series CODD, CE, CN, CV Series Part Number: 091-0071 -000 Material: Polyester Key is pressed into grooves between contacts. SLOT DIMENSIONS Part Number: 091 -0025-000 Material: GF Nylon Key replaces two opposing contacts. Key is pressed into empty contact cavities. A= .050(1.27) Li ION B 35018. 9) SLOT DIMENSIONS A= .070(1.77) B = .350(8.89) . JND, JNK Series al -156 CND, CNK Series ontact Centers AMD, AMK, AND Series and HNG Series Part Number: 091 -0051-000 Material: GF Nylon Key replaces two opposing Part Number: 091-0024-000 Material: GF Polyester Key is pressed into slots contacts. between contacts. Key is pressed into empty contact SLOT DIMENSIONS cavities. A = .050(1.27) SLOT DIMENSIONS B = .350(8.89) A= .070(1.77) B = .350(8.89) ADD, AE, AKC, AN, AV Series HN, HV Series Part Number: 091-0020-012 Material: Copper, Gold Plated Key replaces two opposing contacts. JDD, JE, JN, JV Series Tail is bent 90 after installation. CDD, CE, CN, CV Series SLOT DIMENSIONS A= .100(2.54) B = .350(8.89) Part Number: 091-0114-012 Material: Copper, Gold Plated Key replaces two opposing contacts. =A Tail is bent 90 after installation. t SLOT DIMENSIONS 8 A = .070(1.77) } B = .350(8.89) RECOMMENDED SLOT SIZE Contact Replacement Tools How To Replace Damaged Contacts Wire Wrap , Round Tail Dip Solder and Pierced Eyelet Contacts Only If a contact should become damaged and require replacement, spe- cial tools and replacement contacts are available. The technique and necessary tools are detailed below. Wire Wrap and Round Tail Dip Solder Series AMD, AMK, AND, CND, CNK, HNG, JND, JNK Vikings square wrap terminals and round tail dip solder terminals are retained in the insulator body by means of a press fit. 1. The use of an impact tool is suggested in removing the contact but other means can be used. Select the impact tool according to the chart. The impact tool slips over the tail of the damaged contact and is pushed firmly until the tool trips and drives the contact out. Pierced Eyelet Series AN, CN, HN, JN Vikings pierced eyelet terminals are retained in the insulator body by a dimple at the point where the tail enters the insulator. 1. Using the cut-off tool, cut off the tail at the "dimpled" area and remove the damaged contact. 2. insert a replacement contact into the empty cavity from the front of the connector until! it is completely seated. 3. While holding the contact in the seated position, place the dimple tool over the tail and squeeze to form a dimple on the flat metal at the base of the insulator. The dimple should preferably face out from the center of the connector. The dimple retains the contact in the insulator. 2. Insert a replacement contact into the empty cavity from the front of Ferced Replacement Cur oft Dimple the connector until the tail protrudes on the termination side. ; / ; AN 018-0906-002 115-0109-000 115-0108-000 3. Pull the tail using a pair of pliers until the contact is correctly seated CN 018-0905-002 115-0531-000 115-0532-000 and the tail is of equal length to the other contacts. HN 018-0028-002 115-0109-000 115-0108-000 Replacement Impact JN 018-0905-002 115-0533-000 115-0534-000 Wiw Replacement o/s Series Contact Series Contact Tool 018-1149-002 000407-0085 018-1151-002 000407-0085 000407-0093 JNK 018-1149-002 000407-0085 AMD, AND 018-1140-002 AMK CND 018-1141-002 CNK HNG 018-0526-002 JND 018-1140-002 == ~~ J :| Twist impact we Cut-Off eb + Tool Tool a Dimple Tool me 9005376 COO0034 757 34