1PMT5913Be3 thru 1PMT5956Be3 POWERMITETM 3.0 WATT Zener Diodes SCOTTSDALE DIVISION APPEARANCE DO-216 WWW . Microsemi .C OM DESCRIPTION This surface mountable 3.0 W Zener diode series in the JEDEC DO-216 package is similar in electrical features to the JEDEC registered 1N5913B thru 1N5956B axial-leaded package for 3.3 to 200 V. It is an ideal selection for applications requiring low profile and high-density mounting that are also RoHS Compliant. When properly heat sunk, these zener diodes provide power-handling capabilities only found in larger packages. In addition to its size advantages, Powermite(R) package features include a full metallic bottom that eliminates the possibility of solder flux entrapment during assembly, and a unique locking tab acts as an integral heat sink. Its innovative design makes this device ideal for use with automatic insertion equipment. IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * * * * * * APPLICATIONS / BENEFITS * Very low profile surface mount package (1.1 mm) Integral Heat Sink Locking Tabs Compatible with automatic insertion equipment Full metallic bottom eliminates flux entrapment RoHS Compliant Zener voltage 3.3 to 200 Volts Low reverse leakage Tight tolerance available * * * * * Regulates voltage over a broad operating current and temperature range Wide selection from 3.3 to 200 V Flexible axial-lead mounting terminals Nonsensitive to ESD Moisture classification is Level 1 per IPC/JEDEC J-STD-020B with no dry pack required ESD Rating of >16kV per human body model MAXIMUM RATINGS * * * * * * MECHANICAL AND PACKAGING * Junction and storage temperatures: -55C to +150C DC power dissipation: 3.0 watt with case bottom (TAB 1) 60C (also see derating in Figure 1). Forward voltage @200 mA: 1.2 volts (maximum) Thermal Resistance: 30 C/W junction to Case bottom (Tab 1), or 230C/W junction to ambient when mounted on FR4 PC board (1 oz Cu) with recommended footprint (see last page). Steady-State Power: 3.0 watts at TC < 60oC, or 0.54 watts at TA = 25 C when mounted on FR4 PC board and recommended footprint as described for thermal resistance (see Figure 1 and last page) Solder Temperatures: 260 C for 10 s (max) * * * * * Terminals: Annealed matte-Tin plating over copper and readily solderable per MIL-STD-750 method 2026 (consult factory for Tin-Lead plating) Polarity: Cathode designated by TAB 1 (backside) Case: Molded epoxy package meets UL94V-0 Marking: Last three numerical digits of part number (see device marking code in Electrical Characteristics table below with dot "*" suffix for RoHS Compliant) Weight: 0.016 gram (approximate) Tape & Reel option: Standard per EIA-481-B 7 inch reel 3,000 pieces 13 inch reel 12,000 pieces ELECTRICAL CHARACTERISTICS @ TL = 30oC 1PMT5913B 1PMT5914B 1PMT5915B 1PMT5916B 1PMT5917B 1PMT5918B 1PMT5919B 1PMT5920B Copyright (c) 2005 6-19-2005 REV H Device Marking (4) 913* 914* 915* 916* 917* 918* 919* 920* Test Current Dynamic Impedance Knee Current Knee Impedance Reverse Voltage ZZK Maximum Reverse Current IR VZ (1) IZT ZZT (2) IZK VOLTS 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 mA 113.6 104.2 96.1 87.2 79.8 73.5 66.9 60.5 OHMS 10 9.0 7.5 6.0 5.0 4.0 2.0 2.0 mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 OHMS 500 500 500 500 500 350 250 200 Adc 100 75 25 5 5 5 5 5 VOLTS 1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 VR Maximum Zener Current IZM (3) mA 749.1 686.4 633.6 547.2 526.4 481.8 432.3 397.7 Page 1 1PMT5913B thru 1PMT5956B Microsemi Number Zener Voltage 1PMT5913Be3 thru 1PMT5956Be3 POWERMITETM 3.0 WATT Zener Diodes SCOTTSDALE DIVISION 1PMT5921B 1PMT5922B 1PMT5923B 1PMT5924B 1PMT5925B 1PMT5926B 1PMT5927B 1PMT5928B 1PMT5929B 1PMT5930B 1PMT5931B 1PMT5932B 1PMT5933B 1PMT5934B 1PMT5935B 1PMT5936B 1PMT5941B 1PMT5942B 1PMT5943B 1PMT5944B 1PMT5945B 1PMT5946B 1PMT5947B 1PMT5948B 1PMT5949B 1PMT5950B 1PMT5951B 1PMT5952B 1PMT5953B 1PMT5954B 1PMT5955B 1PMT5956B Device Marking 921* 922* 923* 924* 925* 926* 927* 928* 929* 930* 931* 932* 933* 934* 935* 936* 941* 942* 943* 944* 945* 946* 947* 948* 949* 950* 951* 952* 953* 954* 955* 956* Test Current Dynamic Impedance Knee Current Knee Impedance Maximum Reverse Current IR Reverse Voltage Ohms A Volts Maximum Zener Current IZM (3) mA VZ (1) Volts IZT IZK ZZK mA ZZT (2) Ohms mA 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 55.1 50 45.7 41.2 37.5 34.1 31.2 28.8 25 23.4 20.8 18.7 17 15.6 13.9 12.5 8.0 7.3 6.7 6.0 5.5 5.0 4.6 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.1 1.9 2.5 3.0 3.5 4.0 4.5 5.5 6.5 7.0 9.0 10 12 14 17.5 19 23 28 67 70 86 100 120 140 160 200 250 300 380 450 600 700 900 1200 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 35.8 38.8 42.6 47.1 51.2 56 62.2 69.2 76 83.6 91.2 98.8 114 121.6 136.8 152 363.0 330.0 300.3 270.6 247.5 224.4 206.2 189.8 165.0 153.5 137.0 123.8 112.2 102.3 90.8 82.5 51.2 47.9 42.9 38.6 36.3 33.0 29.7 26.4 24.8 21.5 19.8 18.1 16.5 14.9 13.2 11.6 VR WWW . Microsemi .C OM Microsemi Number Zener Voltage NOTE 1: Product shown has a standard tolerance of 5% on the nominal zener voltage and is also available in 2% and 1% tolerance with suffix C and D respectively. VZ is measured at IZT with TC (TAB 1) 30C and 20 seconds after application of dc current. NOTE 2: Zener impedance is derived by superimposing on IZT a 60 Hz rms ac current equal to 10% of IZT. NOTE 3: Based upon 3 W maximum power dissipation. Allowance has been made for the higher voltage associated with operation at higher currents and temperature. For determination of voltage change with current deviations from IZT see Micro Note 202. 1PMT5913B 913B thru 1PMT5956B Pd Rated Power Dissipation (mW) GRAPHS AND CIRCUIT CIRCUIT DIAGRAM TC Case (TAB 1) Temperature (C) FIGURE 1 Copyright (c) 2005 6-19-2005 REV H Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 1PMT5913Be3 thru 1PMT5956Be3 POWERMITETM 3.0 WATT Zener Diodes SCOTTSDALE DIVISION WWW . Microsemi .C OM DIMENSIONS MOUNTING PAD 1PMT5913B thru 1PMT5956B Copyright (c) 2005 6-19-2005 REV H Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3