www.Lantiq.com
Lantiq™ XWAY™ AMAZON-SE
ADSL2/2+ Standard Entry Solution for CPE Applications
Features
32-bit Multithreading Protocol Processor •
HW acceleration for generic functions •
like CRC, various TC Layer support
Programmable TC Layer for ATM, ATM •
header compression, EFM, ATM VCs,
I.610 OAM F4/F5, ILMI, I.371 and R-037
Protocol acceleration FW for MPoA, •
NAT, ATM/EFM bonding and others for
CPU off -load
Under voltage detection (UVD) with •
power on reset functionality saves
external POR
Real time clock (RTC), optionally with •
separate oscillator connection for low
power mode
Physical Interfaces
ADSL2+ Analog Hybrid Interface •
One 10/100/200 MII/Reverse •
MII/TMII interface
16-bit SDR DRAM •
16/8-bit NOR/NAND Flash •
Memory interface •
Integrated 10/100 Base_T Ethernet Phy •
Multi Media Card Interface (SD/MMCI) •
USB 2.0 host/device •
SPI (Master/Slave •
Embedded System
32-bit MIPS 4KEc •
procesor@133/266 MHz
XWAY™ AMAZON-SE is a next-generation ADSL2+ system-on-a-chip from Lantiq™.
This highly integrated solution is part of the Lantiq AMAZON product family and consists of
ADSL DFE/AFE/LD, USB 2.0, Ethernet PHY and packet acceleration (Protocol Process Engine) for a
cost-optimized ADSL2/2+ modem or router designed as a two-layered PCB. Amazon-SE further
integrates SD/MMCI and SPI connectivity for WLAN and/or memory peripherals.
Lantiq™ XWAY™ AMAZON-SE targets the cost-sensitive broadband Customer Premises Equipment
(CPE) market segment, in particular broadband equipment within residential and SOHO (Small
Offi ce/Home Offi ce) environments. Amazon-SE comes with a complete development kit including
reference designs, documentation, a complete Board Support Package (BSP) based on the Linux®
operating system, as well as the eCoS platform with a compact memory footprint.
Applications
ADSL2/2+ one port Ethernet bridge-modem •
ADSL2/2+ Ethernet + USB dual-port router •
ADSL2/2+ SOHO 4-port Ethernet router with WLAN •
ADSL Features
ITU-T G.992.1/3/5 (ADSL/2/2+) annexes A, B, I, J, M, and L •
ITU-T G.992.2 (G.lite) annex A and ANSI T1.413 Issue 2 •
DTAG UR2 and ETSI standards for ADSL over ISDN •
DSL Forum performance specifi cations TR-048/67 and WT-100 •
Integrated Dying Gasp comparator •
Product Brief
XWAY_AMAZON_SE_Lantiq.indd 1XWAY_AMAZON_SE_Lantiq.indd 1 26.11.2009 19:55:2426.11.2009 19:55:24
Prozessfarbe CyanProzessfarbe CyanProzessfarbe MagentaProzessfarbe MagentaProzessfarbe GelbProzessfarbe GelbProzessfarbe SchwarzProzessfarbe SchwarzPANTONE 541 CPANTONE 541 CPANTONE 7545 CPANTONE 7545 CPANTONE 278 CPANTONE 278 CPANTONE 1525 CPANTONE 1525 C
How to reach us: http://www.Lantiq.com
Published by Lantiq
85579 Neubiberg, Germany
© 2009 Lantiq. All Rights Reserved.
Product Brief
XWAY™ AMAZON-SE: Block Diagram (above) and Application Example (be-
Lantiq™ XWAY™ AMAZON-SE
ADSL2/2+ Standard Entry Solution for CPE Applications
Product Summary
Product Sales Code Description Package
XWAY™ AMAZON-SE PSB 50601 Single-Chip Solution for ADSL2/2+ Modem or Router PG-LQFP-144
Legal Disclaimer The information given in this Product Brief shall in no event be
regarded as a guarantee of conditions or characteristics. With respect to any examples
or hints given herein, any typical values stated herein and/or any information regar-
ding the application of the device, Lantiq hereby disclaims any and all warranties and
liabilities of any kind, including without limitation, warranties of non-infringement of
intellectual property rights of any third party.
Information For further information on technology, delivery terms and conditions
and prices, please contact the nearest Lantiq Offi ce (www.Lantiq.com).
Warnings Due to technical requirements, components may contain dangerous
substances. For information on the types in question, please contact the nearest
Lantiq Offi ce. Lantiq components may be used in life-support devices or systems
only with the express written approval of Lantiq, if a failure of such components can
reasonably be expected to cause the failure of that life-support device or system or
to affect the safety or effectiveness of that device or system. Life support devices
or systems are intended to be implanted in the human body or to support and/or
maintain and sustain and/or protect human life. If they fail, it is reasonable to assume
that the health of the user or other persons may be endangered.
Order Number: PB-e-0014-v1
UART
I / F
Flash
Controller
MIPS 4KEc
Hybrid
System Bus
Multi- Port
DMA
PPE
Memory
Controller
SDR
10/100BT
MMCI
General
Purpose
Controller
USB 2.0
Host /Device
Controller
SD/MMCI -Card
Flash
USB 2.0
UART
LED Control
GPI O/Timer/ Int.
SPI
SPI
ADSL 2+
Engine
PHY
TMAC
ADSL2/2+
SDIO
Internet
Lantiq Chips
Third-party Chips
DRAM
XWAY™
WAVE100
FLASH
XWAY™
AMAZON-SE
PSB 50601
Power Supply
USB 2.0
Ethernet
XWAY_AMAZON_SE_Lantiq.indd 2XWAY_AMAZON_SE_Lantiq.indd 2 26.11.2009 19:55:2826.11.2009 19:55:28
Prozessfarbe CyanProzessfarbe CyanProzessfarbe MagentaProzessfarbe MagentaProzessfarbe GelbProzessfarbe GelbProzessfarbe SchwarzProzessfarbe SchwarzPANTONE 541 CPANTONE 541 CPANTONE 7545 CPANTONE 7545 CPANTONE 278 CPANTONE 278 CPANTONE 1525 CPANTONE 1525 C
