NTCALUG01T103FA - VISHAY - Datasheet.Directory

NTCALUG01T

www.vishay.com Vishay BCcomponents

Revision: 28-Aug-2019 1Document Number: 29164

For technical questions, contact: nlr@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

NTC Thermistors, Standard Lug Sensors, 150 °C

ADDITIONAL RESOURCES

• NTC curve computation:

www.vishay.com/thermistors/ntc-curve-list/

Note

(1) Other R25-values, B25/85-values, and tolerances are available

upon request

FEATURES

•150 °C long term stability (5000 h dry heat)

• Easy mounting using ring tongue terminal

• Rugged construction

• Cable with ETFE insulation according to

NEMA HP-3, type Z, rated 600 VRMS, cable test

voltage 3.4 kV

• AEC-Q200 qualified (grade 1)

• UL recognized, file E148885

(UL category XGPU2)

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Suitable for surface sensing applications, especially when

a good electrical insulation and a good thermal contact

with the chassis is required for:

- Automotive equipment

- EV and battery management

- Power electronics, heat sink

- Consumer appliances

DESCRIPTION

A NTC thermistor chip is soldered to AWG#26

multi-stranded silver plated copper leads with ETFE

insulation and insulated with epoxy coating. The insulated

sensor is attached to a tin plated copper ring lug via a middle

buffer layer. The lead wires are twisted.

MOUNTING

• By means of M3 (stud #3, #4) or M3,5 (stud #5, #6) screw.

Leads to be soldered or crimped

• The device is suitable for screwing e.g. on metal surface

• The leads are suitable for soldering e.g. on PCB

• Consult Vishay for other cable length, cable section,

screw sizes, insulation, connector crimping or other

features

Note

(1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in

capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound

QUICK REFERENCE DATA

PARAMETER VALUE UNIT

Resistance value at 25 °C (1) 10K 

Tolerance on R25-value (1) ± 1 to ± 2 %

B25/85-value (1) 3435, 3984 K

Tolerance on B25/85-value ± 0.5 to ± 1 %

Operating temperature range

at zero dissipation -40 to +150 °C

Min. dielectric withstanding

voltage between terminals

and lug

2700 VAC

Min. insulation resistance between

terminals and lug at 500 VDC 100 M

Weight 2.0 to 3.2 g

3D Models

Design Tools

Models

Available

ELECTRICAL DATA AND ORDERING INFORMATION

R25

()

R25-TOL.

(± %)

B25/85

(K)

B25/85-TOL.

(± %)

(mm) DESCRIPTION

SAP MATERIAL AND ORDERING NUMBER

RoHS COMPLIANT

WITH EXEMPTION (1) RoHS COMPLIANT

10 000 1 3984 0.5 150 ± 10 NTC Lug01T 10K 1 % 3984 K

150 °C ETFE AWG26 150 mm NTCALUG01T103F NTCALUG01T103FA

10 000 1 3435 1.0 150 ± 10 NTC Lug01T 10K 1 % 3435 K

150 °C ETFE AWG26 150 mm NTCALUG01T103FL NTCALUG01T103FLA

10 000 2 3984 0.5 40 ± 5 NTC Lug01T 10K 2 % 3984 K

150 °C ETFE AWG26 40 mm NTCALUG01T103G400 NTCALUG01T103G400A

10 000 2 3984 0.5 150 ± 10 NTC Lug01T 10K 2 % 3984 K

150 °C ETFE AWG26 150 mm NTCALUG01T103G NTCALUG01T103GA

10 000 2 3984 0.5 200 ± 10 NTC Lug01T 10K 2 % 3984 K

150 °C ETFE AWG26 200 mm NTCALUG01T103G201 NTCALUG01T103G201A

10 000 2 3984 0.5 500 ± 10 NTC Lug01T 10K 2 % 3984 K

150 °C ETFE AWG26 500 mm NTCALUG01T103G501 NTCALUG01T103G501A

NTCALUG01T

www.vishay.com Vishay BCcomponents

Revision: 28-Aug-2019 2Document Number: 29164

For technical questions, contact: nlr@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in millimeters

L1L2Ø D1Ø D2Ø D3TL

3ED

Refer to the

ordering

table

3.8 ± 1 3.7 +0.2 / -0 7.2 ± 0.2 5.6 +0.3 / -0.2 1.0 15.70 ± 0.3 6.2 ± 0.2 0.93 ± 0.1

Ø D1

Ø D2

Ø D3

Ø D4

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.