REV. 6/3/05 2 BOTTOM SURFACE OF DATE REV ECN APP'D. BY 1.203 [30.56] MAX. JACK (PCB SURFACE) 2/3/06_| 82 | 7458 M 4/11/06 | B3 7580 TRM 1.074 [27.28] MAX, ~ [PIN NO. 1 [27.28] > a > t , =p ie ge STAAL sey Ul 1 is, UU vu oo w L STEWART 5 = i Pah ah \ & __ +, I t ul EDIT TMM = = PIN NO.1 1.000 [25.40] =| 415 [10.54] z NOTES: 2a ta be 1. CONNECTOR MATERIALS: 1.3.5 BOTTOM ROW HOUSING: THERMOPLASTIC UL94 V-0 -* Ss 5 CONTACTS: COPPER ALLOY CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA pw ea! TOP ROW SEE CHART FOR PART NUMBER wate. ( .250 [6.35] ) 2. FOR PRODUCT SPECIFICATIONS SEE PRO22-01. PIN CALLOUT 400 [2.54] Trp >| -- 3. DIMENSIONS AND TOLERANCES COMPLY WITH FCC/CFR 47, PART 68. TYP. ALL PORTS 050 [1.27] TYP = - 100 [2.54] SZ > > t -~ .650 [16.51] ( 9.035 [.0.89] ) (6) & & > 100 [2.54] | 30 MICRO-INCHES [0.76um | SS7368H22NF " PIN NO. 1 DETAIL A CONTACT PLATING 9.035 [0.89] +. a [0.08] (24) | 9 128 [3.25] ie [3.18] 105 [3.18] 2) [006 [0.15)| 0 foo PIN NO. 4 SEE DETAIL A 4 PLACES BOTTOM ROW OF 1. 1,000 [25.40] __.| P.C.B. RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE ALL CENTERLINE DIMENSIONS ARE BASIC. | TYPICAL HOLE LAYOUT 1159 [4.04] IN MATING AREA PART NUMBER THIRD ANGLE PROJECTION <] Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com DO NOT SCALE DRAWING DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE "SIX CONTACT, SIX POSITION STACK JACK UNSHIELDED, 4 PORT (2 ON 2) DIMENSIONS: INCHES [METRIC] | THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON RN BY! 7) 4-98-03 UNLESS OTHERWISE SPECIFIED ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF TOLERANCES ARE +.005 [0.13] | BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, | APPD BY: RCC TE 5-2-03 ANGLES ARE + 1 COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN SHEET NO. CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT | DWG NO. REV. 1 OF 1 MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. CT730125 BS | AutoCAD