Surface Mount Rectifier Features: * * * * * * * Low Profile Package For Surface Mounted Applications Built-In Strain Relief, Ideal for Automated Placement High Temperature Soldering : 250C/10 seconds at Terminals Easy Pick and Place Ultrafast Recovery Times for High Efficiency Low Forward Voltage, Low Power Loss Mechanical Data * * * * Case : JEDEC DO-214AA, molded plastic over passivated chip Terminals : solder plated, solderable per MIL-STD-750, method 2026 Polarity : Colour band denotes cathode end Weight : 0.002oz, 0.064g Maximum Ratings and Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified Characteristic Symbol US1J-13-F US1K-13-F US1M-13-F Units Maximum repetitive peak reverse voltage VRRM 600 800 1,000 V Maximum RMS voltage VRWS 420 560 700 V Maximum DC blocking voltage V DC 600 800 1,000 V Maximum average forward rectified current at TL=110C IF(AV) 1 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Maximum instantaneous forward voltage at 1A VF 1.7 V Maximum DC reverse current TA=25C at rated DC blocking voltage TA=125C IR 5 100 A Maximum reverse recovery time at IF=0.5A IR=1.A Irr=0.25A trr 75 ns Typical junction capacitance at 4V,1MHz CJ 15 pF RJA RJL 55 20 CW TJ, TSTG -55 to +150 C Maximum thermal resistance (Note1) Operating junction and storage temperature range Note: (1) PCB mounted on 0.2 x 0.2 (5 x 5mm2) copper pad areas www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 Surface Mount Rectifier www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 Surface Mount Rectifier Package Outline Dimensions DO-214AC(SMA) Dim. Min. Max. A 4.25 4.65 B 2.4 2.8 C 1.85 2.15 D 4.85 5.35 E 0.2 Typ. F 0.9 G 1.5 0.2 Max. H 1.9 2.3 I 1.35 1.65 Dimensions : Millimetres Soldering Footprint Package Information Device US1J-13-F US1K-13-F US1M-13-F Dimensions : Millimetres Package Shipping DO-214AC(SMA) 5,000 / Tape & Reel Part Number Table Description Part Number US1J-13-F Surface Mount Rectifier US1K-13-F US1M-13-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0