SCL25 SERIES Single, dual and triple output * * * * * * * * The SCL25 series is a 25W universal input AC/DC external power supply in a 6.32 x 3.35 x 1.5 inch plastic enclosure. The SCL25 series has seven single output and three multiple output models in a low profile package providing a pre-approved external power solution for a host of worldwide low power portable and desktop applications. The SCL25 provides 25W of output power with free air convection cooling which can peak at 30W for 60 seconds. Standard features include universal input, short circuit protection and EN55022 conducted emissions level B. The series, with full international safety approval and the CE mark, provides pre-approved SELV outputs without the need for further safety approval or mechanical integration into the application system. The SCL25 series is designed for use in low power, and desktop data networking, computer and industrial applications requiring external power adapters in a low profile package. [ 2 YEAR WARRANTY ] SPECIFICATION 6.32 x 3.35 x 1.5 inch enclosure 25W external power supply Molded UL94V-0 plastic enclosure Output connector options Stand alone `listed' equipment Short circuit protection EN55022, EN55011 conducted emissions level B UL, CSA and VDE safety approvals All specifications are typical at nominal input, full load at 25C unless otherwise stated GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS Line regulation LL to HL, FL Single outputs Multi's: +5V output Multi's: aux. outputs 0.5% 0.5% 1.0% Total regulation No load to full load (See Note 5) Single outputs Multi's: +5V output Multi's: aux. outputs 4.0% +6.0%/-4.0% see table Overshoot/Undershoot At turn on Transient response +5V output (40% FL to 60% full load step) 10% Hold-up time 110VAC 230VAC 10ms 60ms Efficiency 110VAC and 230VAC Isolation voltage Input/output Input/chassis Switching frequency Variable 70% typical 3000VAC 1500VAC 35kHz to 80kHz 250mV max. dev., 1ms recovery to 1.0% Approvals and standards VDE0805, EN60950 IEC950, UL1950, BABT CSA C22.2 No. 950 Temperature coefficient 0.02%/C, max. Case Material General Electric Lexan, Black Overvoltage protection +5V Output (See Note 9) 6.25V 0.65V Flammability rated Output power limit Primary power limited Weight 80W Pin max. 40W Pout min. MTBF Short circuit protection Green LED indicator Continuous with auto-restart (See Note 7) Normally ON Universal input Input frequency range Safety ground leakage current 110VAC, 60Hz 230VAC, 50Hz 0.2mA 0.4mA EMC CHARACTERISTICS Radiated noise EN55022, EN55011, FCC P15 Level B Conducted noise EN55022, EN55011, FCC P15 Level B Electrostatic discharge EN61000-4-2 Level 4 Electrostat. air discharge IEC801-2 Level 3 RF field susceptibility IEC801-3 Level 2 Electrical fast EN61000-4-4 Level 3 transients/bursts Surge susceptibility EN61000-4-5 Level 3 PAGE 94 150,000 hours Operating, 0C to +40C full load, no derating Non-operating -40C to +85C 0C to +40C ambient, 25W convection cooled Peak (0C to +40C, max. 60s) 30W (See Note 3) Relative humidity Non-condensing Altitude Operating Non-operating Vibration (5Hz to 500Hz) Three orthogonal axes 2.4G rms random vibration, 10 minute test for each axis 90 to 264VAC 36A max. MIL-HDBK-217F Thermal performance 47Hz to 63Hz Input surge current 450g (15.9oz) ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage range UL94V-0 5% to 95% RH 10,000 feet max. 30,000 feet max. Data Sheet (c) Artesyn Technologies(R) 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. EXTERNAL AC/DC POWER SUPPLIES | 25W AC/DC 25 Watt AC/DC external power supplies OUTPUT VOLTAGE OUTPUT CURRENTS TOTAL RIPPLE MIN (1) MAX (2) PEAK (4) (3) REGULATION (5) MODEL NUMBER +5V (1) 0A 2.0A 4.0A 50mV +6.0%, -4.0% SCL25-7608 +12V (2) 0A 1.0A 2.0A 120mV +7.0%, -5.0% -12V (3) 0A 0.2A 1.0A 120mV 5.0% +5V (1) 0A 2.0A 4.0A 50mV +6.0%, -4.0% +15V (2) 0A 0.75A 1.5A 150mV +9.0%, -3.0% -15V (3) 0A 0.2A 1.0A 150mV 5.0% +5V (1) 0A 2.5A 4.0A 50mV +6.0%, -4.0% +12V (2) 0A 1.0A 2.0A 120mV +7.0%, -5.0% +5V (1) 0A 4.0A 5.0A 50mV +6.0%, -4.0% SCL25-7605 +9.5V (1) 0A 2.5A 3.2A 95mV 4.0% SCL25-7614 SCL25-7614H1 (6) +12V (1) 0A 2.0A 2.5A 120mV 4.0% SCL25-7612 SCL25-7612H1 (6) +14V (1) 0A 1.7A 2.2A 140mV 4.0% SCL25-7621 SCL25-7621H1 (6) +16V (1) 0A 1.5A 2.0A 160mV 4.0% SCL25-7616 SCL25-7616H1 (6) +24V (1) 0A 1.0A 1.3A 240mV 4.0% SCL25-7624 SCL25-7624H1 (6,9) +48V (1) 0A 0.5A 0.7A 240mV 4.0% SCL25-7617 SCL25-7617H1 (6,9) SCL25-7610 SCL25-7618 Notes 1 2 3 4 5 6 7 8 9 4 PIN CONNECTIONS MINI DIN PLUG Although the SCL25 models will operate with no load on the outputs, some components temperatures increase under this condition. To OUTPUT SINGLE DUAL TRIPLE maximize reliability, a minimum total load of 4W is required. MATING CONNECTOR PIN NO. OUTPUT OUTPUT OUTPUT Natural convection cooling, 25W maximum. Peak output current lasting less than 60 seconds with duty cycle less than 1 VA VA VA 5%. During peak loading, output voltage may exceed total regulation limits. 2 VA VA VA AMP Shielded 50MHz bandwidth, peak to peak, measured differentially. 3 V V V Miniature circular A A A Total regulation is defined as the static output regulation at 25C, including initial tolerance, line voltage within stated limits, load currents within stated 4 VA VB VB DIN Plug 8 Pin P/N limits, and output voltages adjusted to their factory settings. 5 Return Return V 749179-1 or equivalent C For dual output models to maintain stated regulation: 0.25 I(1) 5, for I(1) > 0.3A 6 Return Return Return I(2) 7 Return Return Return 0.50 I(1) 5, for I(1) < 0.3A I(2) 8 Return Return Return For maximum output current I(3) on triple-output models, i.e. for I(3)=IMax, PIN CONNECTIONS 2.5mm Jack Plug then I(1) min. 0.5A and I(2)I(3). An alternative 48 inch cable assembly with 2.5mm jack plug is available on Inner VA SWITCHCRAFT Power single output models (except 7605 model). This option can be ordered by Outer Return Jack, P/N 712A or adding the suffix `H1' to the end of the model number, e.g. SCL25-7614H1, see table above for availability. Equivalent The green LED is ON to indicate the presence of output (1). The LED turns off during output short circuit condition. To maintain user-system safety approvals, the input power cable must be appropriately rated and approved. 51.2 REF 6.32 REF Overvoltage protection is standard on -7617 and -7624 (1300.0015) (160.00+0.3 - 0.0 ) and 5V output (single and multiple output) models. VIEW A-A 0.216 (5.486) 3.35 REF (85.00+0.4 - 0.2 ) o 0.353 (8.97) International Safety Standard Approvals VDE0805/EN60950/IEC950 File No. 10401-3336-1083 Licence No. 1083 0.098 (2.489) 2.5mm JACK PLUG 48.0 REF (1219.20 15) (SEE NOTE 6) A 2 4 MINI DIN PLUG 51.2 REF (1300.00 15) o 0.353 (8.97) J301 L MINI DIN PLUG G N A UNITS: INCHES (mm) PAGE 95 DS_SCL25_20000101.PDF CSA C22.2 No. 950 File No. LR41062 http://www.artesyn.com 5 1 LED (SEE NOTE 7) UL1950 File No. E136005 Certification pending 8 3 1.50 REF (37.90+0.2 - 0.0 ) geprufte Sicherhelt 7 6