SLCS005S − JUNE 1976 − REVISED OCT OBER 2004
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
DSingle Supply or Dual Supplies
DWide Range of Supply Voltage
− Max Rating ...2 V to 36 V
− Tested to 30 V . . . Non-V Devices
− Tested to 32 V ...V-Suffix Devices
DLow Supply-Current Drain Independent of
Supply Voltage . . . 0.4 mA Typ Per
Comparator
DLow Input Bias Current . . . 25 nA Typ
DLow Input Offset Current ...3 nA Typ
(LM193)
DLow Input Offset Voltage ...2 mV Typ
DCommon-Mode Input Voltage Range
Includes Ground
DDifferential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V
DLow Output Saturation Voltage
DOutput Compatible With TTL, MOS, and
CMOS
description/ordering information
These devices consist of two independent voltage
comparators that are designed to operate from a
single power supply over a wide range of voltages.
Operation from dual supplies also is possible as
long as the dif ference between the two supplies is
2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is
independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve
wired-AND relationships.
The LM193 is characterized for operation from −55°C to 125°C. The LM293 and LM293A are characterized for
operation from −25°C to 85°C. The LM393 and LM393A are characterized for operation from 0°C to 70°C. The
LM2903 is characterized for operation from −40°C to 125°C.
Copyright 2004, Texas Instruments Incorporated
!"# $"%&! '#(
'"! ! $#!! $# )# # #* "#
'' +,( '"! $!#- '# #!#&, !&"'#
#- && $##(
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
2
3
4
8
7
6
5
1OUT
1IN−
1IN+
GND
VCC
2OUT
2IN−
2IN+
LM193 ...D OR JG PACKAGE
LM293 . . . D, DGK, OR P PACKAGE
LM293A ...D OR DGK PACKAGE
LM393, LM393A . . . D, DGK, P, PS, OR PW PACKAGE
LM2903 . . . D, DGK, P, PS, OR PW PACKAGE
(TOP VIEW)
3212019
910111213
4
5
6
7
8
18
17
16
15
14
NC
2OUT
NC
2IN−
NC
NC
1IN−
NC
1IN+
NC
LM193 . . . FK PACKAGE
(TOP VIEW)
NC
1OUT
NC
2IN+
NC V
NC
NC
GND
NC CC
NC − No internal connection
$'"! !$& ../00 && $## # ##'
"&# )#+# #'( && )# $'"! $'"!
$!#- '# #!#&, !&"'# #- && $##(
SLCS005S − JUNE 1976 − REVISED OCT OBER 2004
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
description/ordering information (continued)
ORDERING INFORMATION
TAVIOmax
AT 25°CMAX VCC PACKAGE†ORDERABLE
PART NUMBER TOP-SIDE
MARKING
PDIP (P) Tube of 50 LM393P LM393P
SOIC (D)
Tube of 75 LM393D
LM393
SOIC (D) Reel of 2500 LM393DR LM393
5 mV 30 V SOP (PS) Reel of 2000 LM393PSR L393
5 mV
30 V
TSSOP (PW)
Tube of 150 LM393PW
L393
TSSOP (PW) Reel of 2000 LM393PWR L393
0°C to 70°CMSOP/VSSOP (DGK) Reel of 2500 LM393DGKR M9_‡
0C to 70 C
PDIP (P) Tube of 50 LM393AP LM393AP
SOIC (D)
Tube of 75 LM393AD
LM393A
2 mV
30 V
SOIC (D) Reel of 2500 LM393ADR LM393A
2 mV 30 V SOP (PS) Reel of 2000 LM393APSR L393A
TSSOP (PW) Reel of 2000 LM393APWR L393A
MSOP/VSSOP (DGK) Reel of 2500 LM393ADGKR M8_‡
PDIP (P) Tube of 50 LM293P LM293P
5 mV
30 V
SOIC (D)
Tube of 75 LM293D
LM293
5 mV 30 V SOIC (D) Reel of 2500 LM293DR LM293
−25°C to 85°CMSOP/VSSOP (DGK) Reel of 2500 LM293DGKR MC_‡
−25 C to 85 C
SOIC (D)
Tube of 75 LM293AD
LM293A
2 mV 30 V SOIC (D) Reel of 2500 LM293ADR LM293A
2 mV
30 V
MSOP/VSSOP (DGK) Reel of 2500 LM293ADGKR MD_‡
PDIP (P) Tube of 50 LM2903P LM2903P
SOIC (D)
Tube of 75 LM2903D
LM2903
7 mV
30 V
SOIC (D) Reel of 2500 LM2903DR LM2903
7 mV 30 V SOP (PS) Reel of 2000 LM2903PSR L2903
−40°C to 125°C
TSSOP (PW) Reel of 2000 LM2903PWR L2903
−40
°
C to 125
°
C
MSOP/VSSOP (DGK) Reel of 2500 LM2903DGKR MA_‡
7 mV
32 V
SOIC (D) Reel of 2500 LM2903VQDR L2903V
7 mV
32 V
TSSOP (PW) Reel of 2000 LM2903VQPWR L2903V
2 mV
32 V
SOIC (D) Reel of 2500 LM2903AVQDR L2903AV
2 mV
32 V
TSSOP (PW) Reel of 2000 LM2903AVQPWR L2903AV
CDIP (JG) Tube of 50 LM193JG LM193JG
−55°C to 125°C5 mV 30 V LCCC (FK) Tube of 55 LM193FK LM193FK
−55 C to 125 C
5 mV
30 V
SOIC (D) Reel of 2500 LM193DR LM193
†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
‡The actual top-side marking has one additional character that designates the assembly/test site.
SLCS005S − JUNE 1976 − REVISED OCT OBER 2004
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
symbol (each comparator)
IN+
IN− OUT
schematic (each comparator)
80-µA
Current Regulator
80 µA
60 µA10 µA
VCC
10 µA
OUT
GND
IN+
IN−
Epi-FET
Diodes
Resistors
Transistors
Current values shown are nominal.
COMPONENT COUNT
1
2
2
30
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) 36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential input voltage, VID (see Note 2) ±36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (either input) −0.3 V to 36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage, VO 36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current, IO 20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Duration of output short-circuit to ground (see Note 3) Unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θJA (see Notes 4 and 5): D package 97°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . .
DGK package 172°C/W. . . . . . . . . . . . . . . . . . . . . . . .
P package 85°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . .
PS package 95°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 149°C/W. . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θJC (see Notes 6 and 7): FK package 5.61°C/W. . . . . . . . . . . . . . . . . . . . . . . . .
JG package 14.5°C/W. . . . . . . . . . . . . . . . . . . . . . . . .
Operating virtual junction temperature, TJ 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Case temperature for 60 seconds: FK package 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package 300°C. . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg −65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to GND.
2. Differential voltages are at IN+, with respect to IN−.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
6. Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ(max) − TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
7. The package thermal impedance is calculated in accordance with MIL-STD-883.
SLCS005S − JUNE 1976 − REVISED OCT OBER 2004
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA
†LM193 LM293
LM393
UNIT
PARAMETER
TEST CONDITIONS
TA†
MIN TYP MAX MIN TYP MAX
UNIT
VIO
Input offset voltage
VCC = 5 V to 30 V,
VO = 1.4 V,
25°C 2 5 2 5
mV
VIO Input offset voltage
CC
V
O
= 1.4 V,
VIC = VIC(min) Full range 9 9 mV
IIO
Input offset current
VO = 1.4 V
25°C 3 25 5 50
nA
IIO Input offset current VO = 1.4 V Full range 100 250 nA
IIB
Input bias current
VO = 1.4 V
25°C −25 −100 −25 −250
nA
IIB Input bias current VO = 1.4 V Full range −300 −400 nA
VICR
Common-mode ‡
25°C0 to
VCC − 1.5 0 to
VCC − 1.5
V
VICR
Common-mode
input voltage range‡Full range 0 to
VCC − 2 0 to
VCC − 2
V
AVD Large-signal
differential-voltage
amplification
VCC = 15 V,
VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC 25°C 50 200 50 200 V/mV
IOH
High-level
VOH = 5 V, VID = 1 V 25°C 0.1 0.1 50 nA
IOH
High-level
output current VOH = 30 V, VID = 1 V Full range 1 1 µA
VOL
Low-level
IOL = 4 mA,
VID = −1 V
25°C 150 400 150 400
mV
VOL
Low-level
output voltage IOL = 4 mA, VID = −1 V Full range 700 700 mV
IOL Low-level
output current VOL = 1.5 V, VID = −1 V 25°C 6 6 mA
ICC
Supply current
RL = ∞
VCC = 5 V 25°C 0.8 1 0.8 1
mA
I
CC
Supply current
R
L
=
∞VCC = 30 V Full range 2.5 2.5
mA
†Full range (MIN or MAX) for LM193 is −55°C to 125°C, for LM293 is 25°C to 85°C, and for LM393 is 0°C to 70°C. All characteristics are measured
with zero common-mode input voltage, unless otherwise specified.
‡The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage
range is VCC+ − 1.5 V, but either or both inputs can go to 30 V without damage.
SLCS005S − JUNE 1976 − REVISED OCT OBER 2004
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA
†LM293A
LM393A
UNIT
PARAMETER
TEST CONDITIONS
TA†
MIN TYP MAX
UNIT
VIO
Input offset voltage
VCC = 5 V to 30 V, VO = 1.4 V,
25°C 1 2
mV
VIO Input offset voltage
VCC = 5 V to 30 V, VO = 1.4 V,
VIC = VIC(min) Full range 4mV
IIO
Input offset current
VO = 1.4 V
25°C 5 50
nA
IIO Input offset current VO = 1.4 V Full range 150 nA
IIB
Input bias current
VO = 1.4 V
25°C −25 −250
nA
IIB Input bias current VO = 1.4 V Full range −400 nA
VICR
Common-mode input voltage
§
25°C0 to
VCC − 1.5
V
VICR
Common-mode input voltage
range§Full range 0 to
VCC − 2
V
AVD Large-signal differential-voltage
amplification VCC = 15 V, VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC 25°C 50 200 V/mV
IOH
High-level output current
VOH = 5 V, VID = 1 V 25°C 0.1 50 nA
IOH High-level output current VOH = 30 V, VID = 1 V Full range 1µA
VOL
Low-level output voltage
IOL = 4 mA,
VID = −1 V
25°C 150 400
mV
VOL Low-level output voltage IOL = 4 mA, VID = −1 V Full range 700 mV
IOL Low-level output current VOL = 1.5 V, VID = −1 V 25°C 6 mA
ICC
Supply current
RL = ∞
VCC = 5 V 25°C 0.8 1
mA
I
CC
Supply current
R
L
=
∞VCC = 30 V Full range 2.5
mA
†Full range (MIN or MAX) for LM293A is 25°C to 85°C, and for LM393A is 0°C to 70°C. All characteristics are measured with zero common-mode
input voltage, unless otherwise specified.
§The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage
range is VCC+ − 1.5 V, but either or both inputs can go to 30 V without damage.
SLCS005S − JUNE 1976 − REVISED OCT OBER 2004
6POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
LM2903 LM2903A
UNIT
PARAMETER
TEST CONDITIONS
TA
†
MIN TYP MAX MIN TYP MAX
UNIT
VIO
Input offset voltage
VCC = 5 V to MAX‡,
VO = 1.4 V,
25°C 2 7 1 2
mV
VIO Input offset voltage
CC
V
O
= 1.4 V,
VIC = VIC(min) Full range 15 4 mV
IIO
Input offset current
VO = 1.4 V
25°C 5 50 5 50
nA
IIO Input offset current VO = 1.4 V Full range 200 200 nA
IIB
Input bias current
VO = 1.4 V
25°C −25 −250 −25 −250
nA
IIB Input bias current VO = 1.4 V Full range −500 −500 nA
VICR
Common-mode §
25°C0 to
VCC − 1.5 0 to
VCC − 1.5
V
VICR
Common-mode
input voltage range§Full range 0 to
VCC − 2 0 to
VCC − 2
V
AVD Large-signal
differential-voltage
amplification
VCC = 15 V,
VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC 25°C 25 100 25 100 V/mV
IOH
High-level
VOH = 5 V, VID = 1 V 25°C 0.1 50 0.1 50 nA
IOH
High-level
output current VOH = VCC MAX, VID = 1 V Full range 1 1 µA
VOL
Low-level
IOL = 4 mA,
VID = −1 V
25°C 150 400 150 400
mV
VOL
Low-level
output voltage IOL = 4 mA, VID = −1 V Full range 700 700 mV
IOL Low-level
output current VOL = 1.5 V, VID = −1 V 25°C 6 6 mA
ICC
Supply current
RL = ∞
VCC = 5 V 25°C 0.8 1 0.8 1
mA
I
CC
Supply current
R
L
=
∞VCC = MAX Full range 2.5 2.5
mA
†Full range (MIN or MAX) for LM2903 is −40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise
specified.
‡VCC MAX = 30 V for non-V devices and 32 V for V-suffix devices.
§The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage
range is VCC+ − 1.5 V, but either or both inputs can go to 30 V (32 V for V-suffix devices) without damage.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER TEST CONDITIONS
LM193
LM293, LM293A
LM393, LM393A
LM2903 UNIT
TYP
Response time
RL connected to 5 V through 5.1 k
Ω
,
¶
100-mV input step with 5-mV overdrive 1.3
µs
Response time
RL connected to 5 V through 5.1 kΩ,
CL = 15 pF¶, See Note 8 TTL-level input step 0.3 µ
s
¶CL includes probe and jig capacitance.
NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
PACKAGING INFORMATION
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
5962-9452601Q2A ACTIVE LCCC FK 20 1 None POST-PLATE Level-NC-NC-NC
5962-9452601QPA ACTIVE CDIP JG 8 1 None A42 SNPB Level-NC-NC-NC
JM38510/11202BPA ACTIVE CDIP JG 8 1 None A42 SNPB Level-NC-NC-NC
LM193DR ACTIVE SOIC D 8 2500 None CU NIPDAU Level-1-220C-UNLIM
LM193FKB ACTIVE LCCC FK 20 1 None POST-PLATE Level-NC-NC-NC
LM193JG ACTIVE CDIP JG 8 1 None A42 SNPB Level-NC-NC-NC
LM193JGB ACTIVE CDIP JG 8 1 None A42 SNPB Level-NC-NC-NC
LM2903AVQDR ACTIVE SOIC D 8 2500 Pb-Free
(RoHS) CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2903AVQPWR ACTIVE TSSOP PW 8 2000 None CU NIPDAU Level-1-250C-UNLIM
LM2903D ACTIVE SOIC D 8 75 Pb-Free
(RoHS) CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM2903DGKR ACTIVE MSOP DGK 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-2-260C-1YEAR
LM2903DR ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2903P ACTIVE PDIP P 8 50 Pb-Free
(RoHS) CU NIPDAU Level-NC-NC-NC
LM2903PSR ACTIVE SO PS 8 2000 Pb-Free
(RoHS) CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM2903PWLE OBSOLETE TSSOP PW 8 None Call TI Call TI
LM2903PWR ACTIVE TSSOP PW 8 2000 Pb-Free
(RoHS) CU NIPDAU Level-1-250C-UNLIM
LM2903QD NRND SOIC D 8 75 None CU NIPDAU Level-1-220C-UNLIM
LM2903QDR NRND SOIC D 8 2500 None CU NIPDAU Level-1-220C-UNLIM
LM2903QP OBSOLETE PDIP P 8 None Call TI Call TI
LM2903VQDR ACTIVE SOIC D 8 2500 Pb-Free
(RoHS) CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2903VQPWR ACTIVE TSSOP PW 8 2000 None CU NIPDAU Level-1-250C-UNLIM
LM293AD ACTIVE SOIC D 8 75 Pb-Free
(RoHS) CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM293ADGKR ACTIVE MSOP DGK 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-2-260C-1YEAR
LM293ADR ACTIVE SOIC D 8 2500 Pb-Free
(RoHS) CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM293D ACTIVE SOIC D 8 75 Pb-Free
(RoHS) CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM293DGKR ACTIVE MSOP DGK 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-2-260C-1YEAR
LM293DR ACTIVE SOIC D 8 2500 Pb-Free
(RoHS) CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM293P ACTIVE PDIP P 8 50 Pb-Free
(RoHS) CU NIPDAU Level-NC-NC-NC
LM393AD ACTIVE SOIC D 8 75 Pb-Free
(RoHS) CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM393ADGKR ACTIVE MSOP DGK 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-2-260C-1YEAR
PACKAGE OPTION ADDENDUM
www.ti.com 18-Feb-2005
Addendum-Page 1
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
LM393ADR ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM393AP ACTIVE PDIP P 8 50 Pb-Free
(RoHS) CU NIPDAU Level-NC-NC-NC
LM393APSR ACTIVE SO PS 8 2000 Pb-Free
(RoHS) CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM393APWLE OBSOLETE TSSOP PW 8 None Call TI Call TI
LM393APWR ACTIVE TSSOP PW 8 2000 Pb-Free
(RoHS) CU NIPDAU Level-1-250C-UNLIM
LM393D ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM393DGKR ACTIVE MSOP DGK 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-2-260C-1YEAR
LM393DR ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM393P ACTIVE PDIP P 8 50 Pb-Free
(RoHS) CU NIPDAU Level-NC-NC-NC
LM393PSLE OBSOLETE SO PS 8 None Call TI Call TI
LM393PSR ACTIVE SO PS 8 2000 Pb-Free
(RoHS) CU NIPDAU Level-2-260C-1 YEAR/
Level-1-235C-UNLIM
LM393PW ACTIVE TSSOP PW 8 150 Pb-Free
(RoHS) CU NIPDAU Level-1-250C-UNLIM
LM393PWLE OBSOLETE TSSOP PW 8 None Call TI Call TI
LM393PWR ACTIVE TSSOP PW 8 2000 Pb-Free
(RoHS) CU NIPDAU Level-1-250C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 18-Feb-2005
Addendum-Page 2
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUAR Y 1997
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE
0.310 (7,87)
0.290 (7,37)
0.014 (0,36)
0.008 (0,20)
Seating Plane
4040107/C 08/96
5
4
0.065 (1,65)
0.045 (1,14)
8
1
0.020 (0,51) MIN
0.400 (10,16)
0.355 (9,00)
0.015 (0,38)
0.023 (0,58)
0.063 (1,60)
0.015 (0,38)
0.200 (5,08) MAX
0.130 (3,30) MIN
0.245 (6,22)
0.280 (7,11)
0.100 (2,54)
0°–15°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification.
E. Falls within MIL STD 1835 GDIP1-T8
MECHANICAL DATA
MLCC006B – OCTOBER 1996
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER
4040140/D 10/96
28 TERMINAL SHOWN
B
0.358
(9,09)
MAX
(11,63)
0.560
(14,22)
0.560
0.458
0.858
(21,8)
1.063
(27,0)
(14,22)
A
NO. OF
MINMAX
0.358
0.660
0.761
0.458
0.342
(8,69)
MIN
(11,23)
(16,26)
0.640
0.739
0.442
(9,09)
(11,63)
(16,76)
0.962
1.165
(23,83)
0.938
(28,99)
1.141
(24,43)
(29,59)
(19,32)(18,78)
**
20
28
52
44
68
84
0.020 (0,51)
TERMINALS
0.080 (2,03)
0.064 (1,63)
(7,80)
0.307
(10,31)
0.406
(12,58)
0.495
(12,58)
0.495
(21,6)
0.850
(26,6)
1.047
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.035 (0,89)
0.010 (0,25)
12
1314151618 17
11
10
8
9
7
5
432
0.020 (0,51)
0.010 (0,25)
6
12826 27
19
21
B SQ
A SQ 22
23
24
25
20
0.055 (1,40)
0.045 (1,14)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
MECHANICAL DATA
MPDI001A – JANUARY 1995 – REVISED JUNE 1999
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
P (R-PDIP-T8) PLASTIC DUAL-IN-LINE
8
4
0.015 (0,38)
Gage Plane
0.325 (8,26)
0.300 (7,62)
0.010 (0,25) NOM
MAX
0.430 (10,92)
4040082/D 05/98
0.200 (5,08) MAX
0.125 (3,18) MIN
5
0.355 (9,02)
0.020 (0,51) MIN
0.070 (1,78) MAX
0.240 (6,10)
0.260 (6,60)
0.400 (10,60)
1
0.015 (0,38)
0.021 (0,53)
Seating Plane
M
0.010 (0,25)
0.100 (2,54)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,65 M
0,10
0,10
0,25
0,50
0,75
0,15 NOM
Gage Plane
28
9,80
9,60
24
7,90
7,70
2016
6,60
6,40
4040064/F 01/97
0,30
6,60
6,20
80,19
4,30
4,50
7
0,15
14
A
1
1,20 MAX
14
5,10
4,90
8
3,10
2,90
A MAX
A MIN
DIM PINS **
0,05
4,90
5,10
Seating Plane
0°–8°
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’ s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of T I products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audio
Data Converters dataconverter.ti.com Automotive www.ti.com/automotive
DSP dsp.ti.com Broadband www.ti.com/broadband
Interface interface.ti.com Digital Control www.ti.com/digitalcontrol
Logic logic.ti.com Military www.ti.com/military
Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork
Microcontrollers microcontroller.ti.com Security www.ti.com/security
Telephony www.ti.com/telephony
Video & Imaging www.ti.com/video
Wireless www.ti.com/wireless
Mailing Address: Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
