45013 - DYMO - Datasheet.Directory

‘QWERTY’ (EU)

‘AZERTY’

This product is CE marked in accordance with the EMC directive

and the low voltage directive and is designed

to conform with the following international standards:

Safety – EN 60950, IEC 950, UL 1950

EMC emissions – EN 55022 Class B, CIS PR22 Class B,

FCC pt15 Sub pt B Class B

EMC immunity – EN50082-1, IEC801-2 & IEC801-3

Accessoires

Cassettes ruban Dymo D1

Largeur: 6mm 9mm 12mm 19mm

Longueur: 7m 7m 7m 7m

Noir/Transparent 43610 40910 45010 45800

Bleu/Transparent ––––– ––––– 45011 –––––

Rouge/Transparent ––––– ––––– 45012 –––––

Noir/Blanc 43613 40913 45013 45803

Bleu/Blanc ––––– 40914 45014 45804

Rouge/Blanc ––––– 40915 45015 45805

Noir/Bleu ––––– 40916 45016 45806

Noir/Rouge ––––– 40917 45017 45807

Noir/Jaune 43618 40918 45018 45808

Noir/Vert ––––– 40919 45019 45809

Blanc/Transparent ––––– ––––– 45020 45810

Blanc/Noir ––––– ––––– 45021 45811

Noir/Argenté ––––– ––––– 45022 45812

Noir/Doré ––––– ––––– 45023 45813

Noir/Vert fluo ––––– ––––– 45024 –––––

Noir/Rouge fluo ––––– ––––– 45025 –––––

Adaptateur C.A. 40076

Cette machine porte le label CE en accord avec la directive

EMC et la directive basse tension. Elle a été conçue en

conformité avec les normes internationales suivantes :

Sécurité : EN 60950, IEC 950, UL 1950

Emissions EMC : EN 55022 Classe B, CIS PR22 Classe B,

FCC pt15 sub ptB Classe B

Immunité EMC : EN 50082-1, IEC 801-2 & IEC 801-3

Accessories

Tape cassettes

Width: 6mm 9mm 12mm 19mm

(3/4")(

1/4")(

3/8")(

1/2")

Length: 7m 7m 7m 7m

Black/Clear 43610 40910 45010 45800

Blue/Clear ––––– ––––– 45011 –––––

Red/Clear ––––– ––––– 45012 –––––

Black/White 43613 40913 45013 45803

Blue/White ––––– 40914 45014 45804

Red/White ––––– 40915 45015 45805

Black/Blue ––––– 40916 45016 45806

Black/Red ––––– 40917 45017 45807

Black/Yellow 43618 40918 45018 45808

Black/Green ––––– 40919 45019 45809

White/Clear ––––– ––––– 45020 45810

White/Black ––––– ––––– 45021 45811

Black/Silver ––––– ––––– 45022 45812

Black/Gold ––––– ––––– 45023 45813

Black/Fluo Green ––––– ––––– 45024 –––––

Black/Fluo Red ––––– ––––– 45025 –––––

UK Adapter 40075

European Adapter 40076

24mm

53710

–––––

53713

53714

53715

53716

53717

53718

53719

53720

53721

–––––

24mm

(1")

53710

–––––

53713

53714

53715

53716

53717

53718

53719

53720

53721

–––––

Dit product heeft een CE keurmerk volgens EMC richtlijnen en de

zwakstroom richtlijn en is ontworpen volgens de onderstaande

internationale standaarden

Veiligheid - EN 60950, IEC 950, UL 1950

EMC emissies - EN 55022 Klasse B, CIS PR 22 Klasse B,

FCC pt 15, sub B, Klasse B

EMC immuniteiten - EN50082-1, IEC 801-2 & IEC 801-3

Toebehoren

Tape-cassettes

Breedte: 6mm 9mm 12mm 19mm

Lengte: 7m 7m 7m 7m

Zwart/Transparant 43610 40910 45010 45800

Blauw/Transparant ––––– ––––– 45011 –––––

Rood/Transparant ––––– ––––– 45012 –––––

Zwart/Wit 43613 40913 45013 45803

Blauw/Wit ––––– 40914 45014 45804

Rood/Wit ––––– 40915 45015 45805

Zwart/Blauw ––––– 40916 45016 45806

Zwart/Rood ––––– 40917 45017 45807

Zwart/Geel 43618 40918 45018 45808

Zwart/Groen ––––– 40919 45019 45809

Wit/Transparant ––––– ––––– 45020 45810

Wit/Zwart ––––– ––––– 45021 45811

Zwart/Zilver ––––– ––––– 45022 45812

Zwart/Goud ––––– ––––– 45023 45813

Zwart/Fluo groen ––––– ––––– 45024 –––––

Zwart/Fluo rood ––––– ––––– 45025 –––––

Wisselstroom adapter 40076

Accessori

Cartucce nastro

Larghezza: 6mm 9mm 12mm 19mm

Lunghezza : 7m 7m 7m 7m

Nero/trasparente 43610 40910 45010 45800

Blu/trasparente ––––– ––––– 45011 –––––

Rosso/trasparente ––––– ––––– 45012 –––––

Nero/bianco 43613 40913 45013 45803

Blu/bianco ––––– 40914 45014 45804

Rosso/bianco ––––– 40915 45015 45805

Nero/blu ––––– 40916 45016 45806

Nero/rosso ––––– 40917 45017 45807

Nero/giallo 43618 40918 45018 45808

Nero/verde ––––– 40919 45019 45809

Bianco/Trasparente ––––– ––––– 45020 45810

Bianco/Nero ––––– ––––– 45021 45811

Nero/Argento ––––– ––––– 45022 45812

Nero/Oro ––––– ––––– 45023 45813

Nero/Verde fluo ––––– ––––– 45024 –––––

Nero/Rosso fluo ––––– ––––– 45025 –––––

Adattatore 40076

CERTIFICATO DEL PRODUTTORE/IMPORTATORE

Con il presente documento si certifica che l’etichettatrice

DYMO è conforme alle disposizioni della Norma 1046

sulle interferenze elettriche. Alla Bundespost è stata

notificata la messa in commercio dell’apparecchio ed è

stata concessa l’autorizzazione alla verifica dell’effettiva

conformità alle Norme. 87/308/EEC.

24mm

53710

–––––

53713

53714

53715

53716

53717

53718

53719

53720

53721

–––––

24mm

53710

–––––

53713

53714

53715

53716

53717

53718

53719

53720

53721

–––––

Accesorios

Cintas

Anchura: 6mm 9mm 12mm 19mm

Longitud: 7m 7m 7m 7m

Negro/transparente 43610 40910 45010 45800

Azul/transparente ––––– ––––– 45011 –––––

Rojo/transparente ––––– ––––– 45012 –––––

Negro/blanco 43613 40913 45013 45803

Azul/blanco ––––– 40914 45014 45804

Rojo/blanco ––––– 40915 45015 45805

Negro/azul ––––– 40916 45016 45806

Negro/rojo ––––– 40917 45017 45807

Negro/amarillo 43618 40918 45018 45808

Negro/verde ––––– 40919 45019 45809

Blanco/Transparente ––––– ––––– 45020 45810

Blanco / Negro ––––– ––––– 45021 45811

Negro / Plata ––––– ––––– 45022 45812

Negro / Oro ––––– ––––– 45023 45813

Negro / Verde Fluor ––––– ––––– 45024 –––––

Negro / Rojo Fluor ––––– ––––– 45025 –––––

Adaptador AC 40076

De acuerdo con la directiva EMC de la Comunidad Europea,

y la directiva de bajo voltaje, este producto está diseñado

para cumplir con los siguientes estandards internacionales:

Seguridad - EN 60950, IEC 950, UL 1959

Emisiones EMC - EN 55022 Clase B, CIS PR22 Clase B,

FCC pt15 Sub pt B clase B.

Inmunidad EMC - EN50082, IEC801-2 & IEC801-3

Acessórios

Cassetes

Largura: 6mm 9mm 12mm 19mm

Comprimento: 7m 7m 7m 7m

Preto/Transparente 43610 40910 45010 45800

Azul/Transparente ––––– ––––– 45011 –––––

Vermelho/Transparente ––––– ––––– 45012 –––––

Preto/Branco 43613 40913 45013 45803

Azul/Branco ––––– 40914 45014 45804

Vermelho/Branco ––––– 40915 45015 45805

Preto/Azul ––––– 40916 45016 45806

Preto/Vermelho ––––– 40917 45017 45807

Preto/Amarelo 43618 40918 45018 45808

Preto/Verde ––––– 40919 45019 45809

Branco/Transparente ––––– ––––– 45020 45810

Branco/Preto ––––– ––––– 45021 45811

Preto/Prata ––––– ––––– 45022 45812

Preto/Ouro ––––– ––––– 45023 45813

Preto/Verde Fluor ––––– ––––– 45024 –––––

Preto/Vermelho Fluor ––––– ––––– 45025 –––––

Adaptador 40076

24mm

53710

–––––

53713

53714

53715

53716

53717

53718

53719

53720

53721

–––––

24mm

53710

–––––

53713

53714

53715

53716

53717

53718

53719

53720

53721

–––––

Aksesuarlar

Şerit

Genişlik 6mm 9mm 12mm 19mm

Uzunluk 7m 7m 7m 7m

Siyah/Şeffaf 43610 40910 45010 45800

Mavi/Şeffaf ––––– ––––– 45011 –––––

Kırmızı/Şeffaf ––––– ––––– 45012 –––––

Siyah/Beyaz 43613 40913 45013 45803

Mavi/Beyaz ––––– 40914 45014 45804

Kırmızı/Beyaz ––––– 40915 45015 45805

Siyah/Mavi ––––– 40916 45016 45806

Siyah/Kırmızı ––––– 40917 45017 45807

Siyah/Sarı 43618 40918 45018 45808

Siyah/Yeşil ––––– 40919 45019 45809

Beyaz/Şeffaf ––––– ––––– 45020 45810

Beyaz/Siyah ––––– ––––– 45021 45811

Siyah/Gümüş ––––– ––––– 45022 45812

Siyah/Altın ––––– ––––– 45023 45813

Siyah/Açık yeşil ––––– ––––– 45024 –––––

Siyah/Açık kırmızı ––––– ––––– 45025 –––––

AC Adaptör 40076

24mm

53710

–––––

53713

53714

53715

53716

53717

53718

53719

53720

53721

–––––

DYMO

Cursor flashing

DYMO

Introduction

The Dymo LabelManager 300 enables you to create a wide

variety of high quality self-adhesive labels of up to 90

characters.

The LabelManager uses 6mm (1/4"), 9mm (3/8"), 12mm

(1/2"), 19mm (3/4") or 24mm (1") wide tape cassettes in a

number of label colours. Labels are back slit for easy

removal from the backing tape. Text can be printed

horizontally or vertically in a variety of sizes and styles and

can be left-justified, right-justified or centred on the label.

Visit www.dymo.com for information on obtaining tapes

and accessories for your LM300.

Warranty Registration

Please complete the warranty registration card and return

it to the relevant address, within seven days– see the

warranty booklet for details.

Power Supply

BATTERIES

•With the LabelManager positioned as shown in fig A➊

on page 2, open the machine by hinging down the

keyboard. Apply pressure to point A➋ of the battery/

tape compartment cover to release the catch, then

hinge down the cover.

•Insert six size AA alkaline or re-chargeable Nickel-

cadmium batteries, observing the polarity markings

A➌, and close the cover.

•Remove batteries if the LabelManager is to be unused

for some time.

AC ADAPTOR (optional)

•Connect the AC adaptor to socket B➊. Inserting the

adaptor plug disconnects the supply from the batteries.

•Unplug the AC adaptor from the LabelManager before

disconnecting the mains power to the adaptor,

otherwise all label memory settings may be lost (see

also ON/OFF).

Changing the cassette

•Apply pressure to point A➋ of the battery/tape

compartment cover to release the catch, then hinge

down the cover.

•Hold as shown, then lift cassette C➊ straight up and

out.

•Ensure tape and ribbon C➋ are taut across mouth of

cassette and tape passes between guideposts before

installing as shown. If necessary, turn spool C➌

clockwise to tighten ribbon.

•Check that cassette switch D➊ is set for the cassette type

– see page 2. A notch in the cassette will fit over the

switch when it is set correctly.

•Insert cassette with tape and ribbon positioned as

shown between print head D➋ and pinch rollerD➌.

•Push

firmly

D❹ until cassette

clicks

into place. Ensure

tape and ribbon are positioned correctly.

•Close the compartment cover.

Creating your first label

You will no doubt be anxious to see what your

new LabelManager 300 can do. Before we go on to

explore the many advanced features of the LM300, follow

these simple steps to create your first label:

1. Fit the batteries, or connect the AC adaptor, plug in and

switch on at the wall socket - see ‘Power Supply’.

2. Open the battery/cassette compartment cover and

install a tape cassette – see page 2 and ‘Changing the

Cassette’. Check that the cassette is fitted correctly.

3. Close the cover, then press to switch the power on.

The welcome message ‘DYMO’ will appear, and then

the display should look like this:

4. Use the keyboard to type in your full name.

Each character you enter will appear on the display, for

example:

•For an UPPER CASE character, press and hold down

followed by the character required.

•Press

CAPS

for all subsequent characters in UPPER

CASE.

• Press the space bar once for the space between each

name.

If you make a mistake, press

DEL

to delete the error,

then type in the correction.

5. When you have finished, press

. A label will be

printed and will emerge from the slot in the top right

hand side of the machine. Wait until the mechanism

has stopped, then press the cutter lever E to cut off the

label and remove it from the machine.

You should now have a high quality printed name label —

don’t waste it! If this is your personal machine, why not

fix the label to the underside to identify its owner? You

have just found the first of many uses for your DYMO

labels.

CLEAR TEXT +

DEL

CLEAR

•Press to clear all the current text and cancel any fixed

length setting, but leave the text size and other settings

unchanged. Also use to exit or clear certain function

key operations.

CURSOR KEY

•Press or to move the cursor along the text, one

character at a time.

•Press and hold to scan through the text.

•Press + or to move the cursor to the

beginning or end of the line of text.

•When used in conjunction with certain function keys,

use or to select options.

•To insert characters into the text, use or to position

the cursor under the character to the right of the insertion

point, then type in the characters required.

•Press or to move the cursor to the start of the

previous or next line of a multi-line label.

•Press + or to move the cursor to the

beginning or end of the label.

PRINTING

•Press

to print the label.

•Use cutter lever E to release the label – see page 2.

•If the display shows ↕↕↕↕↕↕↕↕↕↕, the tape cassette

installed in the machine is too narrow for the label to be

printed; change the cassette to a wider tape.

PREVIEW

Allows you to preview your label before printing it.

•Press +

CAPS

PREVIEW

and the entire text will scroll

across the display.

On labels with 2 or more lines, the message will be

previewed as a single line message.

SPACE KEY

•Press to insert a space into the text.

SYMBOLS +

SYMBOLS

•Press to select a symbol character – see SYMBOLS

AND SPECIAL CHARACTERS and the symbols table on

page 2.

TEXT SIZE

SIZE

•The display shows the current selection of text print

size:

Height Condensed Normal Extended

small

medium

large

The Display

The display shows:

•Up to two rows of 15 characters, plus the cursor,

at one time.

•Function indicators – as shown above.

•The display will flash if you press an incorrect key in a

function sequence.

Shift on

CAPS on

ABCDEFGHIJKLMN

BIG font on Vertical text

Mirror on Copies on

Italic Outline

Barcode on

Shadow BoxUnderline Background

pattern

Size

Line indicator

Justify

Function keys

ON/OFF

Switches the power on and off.

•Switches off automatically after two minutes if no keys are

pressed. The last label created will be retained and

displayed when next turned on. Any stored label and

settings will be retained.

Note: If the batteries are removed for more than a few

seconds, all text and settings will be lost.

When power is restored, the display will show a flashing

cursor (no text) and the settings will be full height

standard width text with and all other settings off.

CAPITALS

CAPS

•Press for all subsequent characters in UPPER CASE

(CAPITALS), as confirmed by the CAPS indicator in the

display.

•Press again to cancel and return to lower case.

SHIFT KEY

Dual action - either press and hold down or press and

release to remain in “shift” position. Press again to

return to normal state.

•Use before pressing an alphabet key to produce

an UPPER CASE (CAPS) character.

•For dual-purpose keys, press first to produce the

legend above the key.

•Pressing while

CAPS

is set will give a lower case

character.

DELETE

DEL

•Press to delete the character to the left of the cursor, or to

exit certain function key operations.

•Large height is available on 19 and 24mm labels only.

Medium height is available on all except 6mm labels.

Small height is available on all labels.

•Press

SIZE

to select the size menu:

Use to select the size symbol required, then press

to confirm the selection.

The "B" (BIG FONT) mode will produce highly visible

labels using the entire print height. In “B” mode, all text

will be printed as capitals (without accents).

•To create a label in "B" mode use or to move the

cursor under "B" and press (

BFONT

lights in display).

•When "B" is selected, all other options are not available.

JUSTIFY

JUST

Labels are normally printed with the text left-justified. On

multi-line labels, press

JUST

to select left-justified, right-

justified or centred text, as shown in the display. See

also LABEL LENGTH.

VERTICAL TEXT

VERT

•Rotates the text through 90° so that the label is printed

, as confirmed by the

VERT

indicator in the display.

•Press again to cancel and return to horizontal text.

Note: Vertical text is not available on multi-line labels.

MULTI-LINE PRINTING

•Press to start the next line of text on a multi-line

label, e.g.

This is a two line label in the display will be

printed as:

This is a two and the display will

line label indicate 2 lines:

Labels can be created as follows:

6mm 1 line small text

9mm Up to 2 lines

small text

9mm 1 line medium text

12mm Up to 2 lines

small text

12mm 1 line medium text

The line indicator in the display will confirm the number

of lines in the label.

BOXED/UNDERLINED PRINTING

BOX/UL

•If no Box/Underline option has been selected, pressing

BOX/UL

once will display the menu below:

Up to

4 lines

small

text

Up to 2 lines

medium text

1 line large text

Underlined - — = DYMO

Square Box - =

Pointed Box - =

Round Corners - =

Crocodile Box - =

Scroll Box - =

3-D Box - =

•Use or to move the cursor under the desired

option. Either press to select the option (confirmed

by the or — indicator displayed), or

DEL

to exit .

•When the or — indicator is displayed, press

BOX/UL

to cancel the Box/Underline option.

LABEL LENGTH

LTH

The length is normally calculated automatically, according

to the length of the text on the label.

The label length function displays the last used fixed label

length, eg:

40mm 10

•Press

DEL

to exit the length function without

changing the length, or:

•Use or to increase (5000mm / 196.85

inches max.) or decrease the length in 1mm / 0.04 inch

steps, or or to increase or decrease the length in

10mm / 0.4 inch steps. The minimum fixed label length

is 45mm / 1.8 inches.

•Press to fix the length for all subsequent labels,

confirmed by the

LTH SET

indicator in the display.

•Press

LTH

to cancel the fixed length and restore the

automatic length.

•If the fixed length is too short for the text, when you

press

or +

CAPS

PREVIEW

the display will show how

much longer the label is than the fixed length, eg:

and it will not print. Either cancel the fixed length (see

above), or press

LTH

twice and use to increase the

length; the label is now long enough and can be

printed.

MULTIPLE COPIES +

STYLE

COPIES

•Your LabelManager can provide multiple copies within

the range 1-99.

•To use this facility press then

STYLE

COPIES

to show the

last number of copies set on the display, for example

# = 03

. Use or to increase or decrease

the number of copies required, then press to

confirm (

COPIES

indicator lights in the display). To

print the desired quantity press

19mm

24mm

19mm

24mm

19mm

24mm

•To cancel an existing multiple copies setting, press

STYLE

COPIES

Note: A row of 2 vertical dots will print between each

label as a cutting guide.

INCREMENTAL NUMBERING

Labels can be printed in increments of 1 automatically.

•Key in your starting number as the right most digit on

the label. Press then

the display will

automatically move up a digit to the next number.

Press then

to continue the sequence.

•It is also possible to include automatic incremental

numbering when printing multiple copies.

•Key in your starting number, eg. LABEL 1A .

•Next press then

STYLE

COPIES

followed by until the

desired number of copies are displayed, eg.10, or use

or to move the cursor under the number digits

and key in the number required. Press to confirm.

Now press then

. This will print ten labels -

LABEL 1A to LABEL 10A. While using fixed length

setting, the LabelManager will stop printing when the

label exceeds the fixed length.

BARCODES +

JUSTIFY

BARCODE

Barcodes can be printed on 19mm and 24mm wide labels

only and can be either full height or mixed with text on

one or two lines.

To create a bar code:

•Press +

JUSTIFY

BARCODE

to display the barcode type

previously selected.

•Press

DEL

to cancel and return to the current

label, or

•Use or to step through the barcode types

available: EAN-13, EAN-8, UPC-A, UPC-E, CODE-39 and

CODE-128.

•Press to select the barcode type displayed. The

barcode indicator will light in the display and the

symbols and will appear at each end of the space

allocated for barcode characters.

•Enter the characters which will become the barcode,

eg: 1234567.

•Press to return to the label.

Note that the barcode indicator will appear in the display

whenever the cursor is positioned under barcode

characters.

•To edit a barcode, press +

JUSTIFY

BARCODE

; the barcode

characters only will be displayed and the barcode

indicator will light in the display.

•Press or +

JUSTIFY

BARCODE

again to return to the label.

On a single line label, a bar code can be mixed with text

which is small, medium or large size:

A two-line label always has small size text when it is

mixed with a barcode.

Text entered before pressing followed by

JUSTIFY

BARCODE

, will result in text above the barcode:

Entering the text after pressing at the end of a barcode

will produce text below the barcode:

Text can be underlined, eg:

STYLE

•Press to display the style menu:

Use or to select

italic

, outline, shadow

shadow or

mirrored text, then press to confirm. The

STYLE

indicator will light in the display.

•Press

STYLE

again to cancel and return to normal text.

PAGE BREAK +

You can divide your label into 'pages' or blocks of text,

each with its own text size and style settings. The number

of lines which can be created in each page will depend on

the label width.

•Press + to insert a page break.

•Press +

CAPS

PREVIEW

to preview the label; each page

break is identified by the symbol •||•.

SAVE +

SIZE

SAVE

You can save up to 10 labels in the memory.

•To save your current label, press +

SIZE

SAVE

display the memory locations. If there are no labels

saved, the display will show:

with the cursor under the first location.

The boxes are full if they contain a label and the cursor

will be under the last changed label, eg:

Contents of lab

ABC

123 123

ABC

1 2 3 1 2 3

123

1 2 3

ABC

1 2 3

ABC

1 2 3

ABC

ABC 123

1 2 3

DEF

DYMO LABELMANAGER

ABC 123

1 2 3

DEF

DYMO LABELMANAGER

In this example, there are three saved labels, the cursor

is under the one which was last changed and the

contents of that label is displayed on the second line.

You can press +

CAPS

PREVIEW

to preview the entire

contents of the label if required.

•Use or to move the cursor under an empty

location, then press to save your label and return to

the label, or

DEL

to exit and return to the label.

•To delete the contents of a memory location, use

or to move the cursor under the location, then

press +

DEL

CLEAR

RECALL +

BOXES

RECALL

•Press +

BOXES

RECALL

to display the memory locations of

saved labels - as shown in ‘SAVE’ above.

To recall a saved label, use or to move the cursor

under each full location, until the label you require is

displayed.

You can press +

CAPS

PREVIEW

to preview the entire

contents of the label if required.

•Press to select the label required, or

DEL

to exit

and return to the current label.

•To delete the contents of a memory location, use

or to move the cursor under the location, then

press +

DEL

CLEAR

PATTERN +

VERT

PATTERN

Background patterns or text cannot be printed on 6mm

wide labels, or with Mirror, Vertical or BIG text.

•If a pattern is already in use (the

PATTERN

indicator is

lit in the display), pressing +

VERT

PATTERN

will cancel the

pattern.

•Press +

VERT

PATTERN

to display the pattern menu:

•Use or to move the cursor under the pattern

required.

•Press to select the pattern required (the

PATTERN

indicator will light in the display), or

DEL

to exit and

return to the current label.

A label previously saved in one of the ten memory

locations can be used as background text on another

label. For example, a label already saved containing the

name

DYMO

can be printed in the background of a label

with has LM300 as the foreground text:

woodgrain

bricks

tint

check

tartan

diamonds

weave

text

Note that background text is always printed in BIG font,

(regardless of the size selected for the original label)

and the amount of background text printed is

determined by the length of the foreground label.

•For background text, select ‘A’ . The display will show

the saved labels locations:

Contents of lab

Use or to move the cursor under the label location

required.

•Press to select the label required (the

PATTERN

indicator is lit in the display) and return to the current

label which will be the foreground text.

•Press

to print the label.

LAST LABEL MEMORY

•The unit will store the last label text and settings when

turned off. Upon power-up, these will be restored and

displayed. Removal of the batteries for more than a few

seconds may cause this information to be lost.

ALIGNMENT +

LTH

ALIGN

•If a fixed label length is set, each press of +

LTH

ALIGN

will align the image to the left, the centre or the right of

the label, as shown in the display.

EURO CONVERSION

or +

The LabelManager can be set to convert a chosen

currency into

or out of +

Euros. When this is

selected, the label is scanned from right to left for a valid

number. The first occurence of a comma (,) or a full stop

(.), reading from right to left, will be read as a decimal

point. For example:

• If set to convert between Euros and Belgian Francs

(see ‘Euro Set-up’ below), pressing +

will

convert the number on the label into Belgian Francs and

add the BF value to the end of the label:

‘Sale 10.00/’ becomes ‘Sale 10.00/BF403.40’

If the original number is at the end of the label, it will

be replaced by the BF value:

‘Sale 10.00’ becomes ‘Sale BF403.40’

•Pressing

will convert the number on the label into

Euros and add the Euro value to the end of the label:

‘Sale 10.00/’ becomes ‘Sale 10.00/e0.24’

If the original number is at the end of the label, it will

be replaced by the Euro value:

‘Sale 10.00’ becomes ‘Sale e0.24’

Note that values are rounded to the nearest one hundreth

of a unit.

DYMO

LM300

EURO SET-UP

To set the currency for conversion to Euros:

•Press + and then

. The display

will show the previously selected currency and its

conversion rate into Euros, eg:

BEF  BF40,3399

•Use or to step through the currencies available:

Austria: 13,7603 öS

Belgium: BF 40,3399

Germany: DM 1,95583

Spain: 166,386 Pts

Finland: 5,94573 mk

France: 6,55957 Fr

Ireland: £ 0.78756

Italy: L1936,27

Luxembourg: LF 40,3399

e1 = _

Press to confirm the selection.

•The next time that you press

or +

, the

conversion will be between Euros and the chosen

currency.

The line showing e1 = _ is user-definable. You can enter a

currency symbol and rate for your currency against the

Euro, eg $US. Note that for currencies larger than the

Euro, you must enter ‘0’ before the decimal point of the

value.

Symbols and special characters

INTERNATIONAL CHARACTERS

To add a diacritical (accent) to create an international

character, enter the character first, followed immediately

by the diacritical, e.g. press

followed by

get é.

To add a diacritical to an existing character, use or

to place the cursor under the character to the right of the

character to be changed, then press the appropriate

diacritical key.

SYMBOLS +

SYMBOLS

•Press to show symbols and special characters, some of

which are not available direct from the keyboard. The

display will show the last used symbol character, for

example:

with a line of symbols above

it. Each letter selects a line of symbol characters,

numbered 1 to 6, as shown in the table on page 2.

•Press

DEL

to cancel, or

•Press a letter key ‘A’ to ‘Z’ until you find the line of

symbols required. You can then press a number key ‘1’

to ‘6’ to select the symbol required.

Alternatively, use or to step through the rows A

to Z, then use or to move the cursor under the

symbol required.

Press to place the symbol in the label.

Cleaning

•Clean the cutter blade regularly: Press and hold down

cutter lever E to expose cutter blade F➊, then use a

cotton bud and alcohol to clean both sides of the blade.

Release cutter lever E.

•Check and clean print head face F➋ regularly using a

cotton bud and alcohol ONLY.

Troubleshooting

No display

•check machine is on

•replace discharged batteries

•check AC adaptor.

No printing or poor text

•replace discharged batteries

•check tape cassette installed correctly

•clean the print head

•replace the tape cassette.

Poor print quality with white ink

•When using a White on Black or a White on Clear

cassette, it may be necessary to use the darkest

contrast setting in order to obtain good print quality.

To change the contrast setting via the keyboard, read

and follow the instructions as described in the

paragraph “Print Contrast”.

Tape jammed

•lift out tape cassette carefully

•remove/release jammed tape

•DO NOT cut the ink ribbon – turn spool C➌ to tighten

•cut off excess label tape

•refit/replace the tape cassette.

Poor cutter performance

•clean the cutter blade regularly

No response to print key

•!!!!!!!!!!!!!!! in the display indicates a printer jam.

Press any key to return to normal display. Open the

cassette compartment and free the jam.

• flashing in the display

indicates discharged batteries. Press any key to return

to normal display. Replace the batteries.

No success?

•Call the DYMO customer service hotline telephone

number in your country – see the warranty booklet.

PRINT CONTRAST — may be adjusted by pressing

SYMBOLS

followed by

to display the

contrast symbols .

•Use or to select lighter or darker print.

•Press to confirm the setting. The contrast level will

revert to the mid-setting when the LabelManager is

turned off and on again.

Note: This function enables you to adjust the print

quality under extreme temperature conditions.