BXA40-24S05-MJ - Emerson Network Power - Embedded Power

The BXA40 Series providing up to 40 Watts, has been conceived as

an applications specific range of dc-dc converters, specifically

addressing telecommunications, industrial electronics, test

equipment, mobile telecommunications and distributed power

applications. The series offers two wide input voltage ranges, 18

Vdc to 36 Vdc and 36 Vdc to 75 Vdc, and is available with single

outputs from 2.9 V to 12 V. The BXA40 series is designed to meet

ETSI telecoms interface standards ETS300-132-2. Together with

internal filtering, safety approval to IEC950 and basic insulation,

the 48 V models are ideal for telecommunications applications.

The 24 V models are particularly suited to industrial and test

equipment applications, featuring EN61000-4-2, -3, -4, -5 and -6

immunity compliance. Other features include low output ripple,

overvoltage protection, indefinite short circuit protection, remote

enable and remote sense.

Embedded Power for

Business-Critical Continuity

BXA40 Series

Single output

Special Features

• Pin-compatible with

NFC40 Series

• Meets telecom power supply

interface standard

ETS300-132-2

• EN60950, CSA C22.2 No. 950

and UL1950 safety approvals

• EN61000-4-2, -3, -4, -5, -6

immunity compliant

• Fixed frequency operation at

350 kHz typ.

• MTBF in excess of

500,000 hours

• Basic insulation system with

1500 Vdc isolation

• Remote sense on low voltage

logic outputs

• Output voltage trim

• Available RoHS compliant

• 2 year warranty

Total Power: 40W

Input Voltage: 18 - 36VDC

36 - 75VDC

# of Outputs: Single

Safety

VDE0805/EN60950/IEC950

File No. 14501-3336-7009

Licence No. 6296

UL1950 File No. E174104

CSA C22.2 No. 950

File No. LR41062C

Rev.03.08.07

bxa40s

1 of 4

Rev.03.08.07

bxa40s

2 of 4

Embedded Power for

Business-Critical Continuity

All specifications are typical at nominal input, full load at 25°C unless otherwise stated.

Specifications

EMC CHARACTERISTICS

Conducted emissions EN55022, FCC part 15, Level B

(See Notes 4 and 13)

Radiated emissions EN55022, FCC part 15 Level A

ESD air EN61000-4-2, level 3 Perf. criteria 1

ESD contact EN61000-4-2, level 4 Perf. criteria 1

Surge EN61000-4-5, level 3 Perf. criteria 1

Fast transients EN61000-4-4, level 3 Perf. criteria 1

Radiated immunity EN61000-4-3, level 3 Perf. criteria 1

Conducted immunity EN61000-4-6, level 3 Perf. criteria 1

GENERAL SPECIFICATIONS

Efficiency See table

Isolation voltage Input/output 1500 Vdc

Input/case 1500 Vdc

Switching frequency Fixed 350 kHz typ.

Approvals and EN60950, UL1950

standards CSA C22.2 No. 950

Case material Aluminum substrate

with plastic case

Material flammability UL94V-0

Weight 85 g (3.0 oz)

MTBF MIL-HDBK-217F 500,000 hours

Size 2.2 x 2.2 x 0.5 inches

55.9 x 55.9 x 12.7 mm

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Baseplate operating -40 °C to +105 °C

temperature

Non-operating -55 °C to +105 °C

Thermal impedance No air flow, no heatsink 8.5 °C/W

(See Note 6) No air flow, with heatsink 7.2 °C/W

OUTPUT SPECIFICATIONS

Voltage adjustability ±10%

Line regulation Low line to high line ±0.3%

Load regulation Full load to no load ±1.0%

Ripple and noise 2.9 V and 3.3 V 30 mV pk-pk

(20 MHz bandwidth) 5 V 50 mV pk-pk

12 V 100 mV pk-pk

All models 20 mV rms

Temperature coefficient ±0.02%/°C

Overvoltage protection (See Note 9) 135% Vout

Short circuit protection (See Note 10) Continuous

Transient response 25% to 100% load 4.0%

(See Note 11)

Voltage accuracy ±1.0% ≤5 V, ±2.0% ≥12 V

Remote sense Compensated line drops

(See Note 8) up to 0.5 V on 5 V models

Compensated line drop up to

300 mV on 2.9 V and 3.3 V models

INPUT SPECIFICATIONS

Input voltage range 24 Vin nominal 18-36 Vdc

48 Vin nominal 36-75 Vdc

Reverse voltage (See Note 5)

protection

Max. input rise and 48 V 5 V/ms

fall time ETS300-132

Start-up time 30 ms typ.

Remote ON/OFF

Logic compatibility CMOS/TTL

ON Open-circuit

OFF <1 Vdc

Rev.03.08.07

bxa40s

3 of 4

Embedded Power for

Business-Critical Continuity

Specifications Contd.

Notes

1Nominal line, at no load.

2Low line to high line at full load.

3Full load to no-load at nominal line.

4For conducted noise operation of the BXA40 to VDE0871, VDE0878 and

EN55022 level B, see BXA40 Design Note 101.

5Reverse voltage protection can be implemented by putting a slow blow fuse on

the positive input rail. Rate the fuse at 200 Vdc,1.5 A for 48 Vdc inputs and 100

V, 4.5 A for 24 Vdc input units.

6The maximum operating ambient temperature, without derating depends on

internal power dissipation and hence efficiency and cooling method. Download

BXA40 Design Note 101 which provides detailed thermal calculations and

design-in hints from the Artesyn website.

7Do not exceed a dv/dt rate of 100 V per second at the trim pin input if output

current is less than 0.4% lo max.

8Remote sense is offered as standard on the 2.9 V and 3.3 V products. The

BXA40-24S05J and BXA40-48S05J come with remote sense as an option.

Remote sense design is designated by the suffix ‘-S’ e.g. BXA40-48S05-SMJ (for

units with metric inserts), BXA40-48S05-SJ (for units with imperial inserts). For

models without remote sense option, pin 5 and pin 6 are absent.

9Overvoltage protection is 118% on 3.3 V output model.

10 For 2.9 V output, no short circuit protection above 90 °C baseplate temp.

11 Transient response, 25% to 100% load, 10% for 2.9 V and 3.3 V models.

12 Units with the suffix ‘-M’ at the end of the model number are offered as

standard with metric threaded inserts (M3). To order units with imperial

threaded inserts (4-40 UNC) please remove the suffix ‘-M’ from the model

number. These inserts are used for bolting the unit to a PCB and/or fixing

heatsinks.

13 An external filter capacitor is necessary for safe operation of the 24 V input

models. It is also suggested that an external filter capacitor be used on the 48 V

input models. A 4 μF (or greater) film capacitor such as: ITW Paktron Capstick

series, part number 405K100CS4 4 μF/100 V is recommended, if filtering is not

used. See BXA40 Design Note 101.

14 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.

TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special

request, please contact your local sales representative for details.

15 NOTICE: Some models do not support all options. Please contact your local

Artesyn representative or use the on-line model number search tool at

http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

INPUT OUTPUT OUTPUT INPUT TYPICAL REGULATION MODEL

VOLTAGE VOLTAGE CURRENT (MAX.) CURRENT (1) EFFICIENCY LINE (2) LOAD (3) NUMBER (12,14,15)

18-36 Vdc 3.3 V 7 A 70 mA 75% 0.3% 1.0% BXA40-24S3V3-SMJ (8)

18-36 Vdc 5 V 8 A 40 mA 81% 0.3% 1.0% BXA40-24S05-MJ (8)

36-75 Vdc 2.9 V 6.9 A 40 mA 77% 0.3% 1.0% BXA40-48S2V9-SMJ (8)

36-75 Vdc 5 V 8.0 A 30 mA 82% 0.3% 1.0% BXA40-48S05-MJ (8)

36-75 Vdc 12 V 3.3 A 30 mA 87% 0.3% 1.0% BXA40-48S12-MJ

PIN CONNECTIONS

PIN NUMBER SINGLE OUTPUT

1 + Input

2 – Input

3 Control

4 No Connection

5 - Sense (8)

6 + Sense (8)

7+ Output

8 Common

9Trim

10KΩ

TRIMPOT

TRIM

DOWN

TRIM

RT1

RT2

EXTERNAL OUTPUT TRIMMING

Output can be externally trimmed

by ±10% using either method shown below.

Embedded Power for

Business-Critical Continuity

Rev.03.08.07

bxa40s

4 of 4

Emerson Network Power and the Emerson

Network Power logo are trademarks and

service marks of Emerson Electric Co.

Emerson Network Power.

The global leader in enabling

business-critical continuity.

EmersonNetworkPower. com

AC Power

Connectivity

DC Power

Embedded Power

Inbound Power

Integrated Cabinet Solutions

Outside Plant

Precision Cooling

Site Monitoring and Services

Americas

5810 Van Allen Way

Carlsbad, CA 92008

USA

Telephone: +1 760 930 4600

Facsimile: +1 760 930 0698

Europe (UK)

Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX

United Kingdom

Telephone: +44 (0) 1384 842 211

Facsimile: +44 (0) 1384 843 355

Asia (HK)

16th - 17th Floors, Lu Plaza

2 Wing Yip Street, Kwun Tong

Kowloon, Hong Kong

Telephone: +852 2176 3333

Facsimile: +852 2176 3888

For global contact, visit:

www.powerconversion.com

technicalsupport@powerconversion.com

While every precaution has been taken to ensure

accuracy and completeness in this literature, Emerson

Network Power assumes no responsibility, and disclaims

all liability for damages resulting from use of this

information or for any errors or omissions.

BOTTOM VIEW

ALL DIMENSIONS IN INCHES (mm)

0.3

(7.62)

0.019

(0.50)

0.50

(12.70) 0.15

(3.90)

321

98 76 5 4

2.20 ±0.02

(

0 ±0.50

)

1.90

(

)

1.80

(

)

0.15

(

)

0.05

(

)

0.2

(5.08)

0.1

(2.54)

0.6

(15.24)

0.8

(20.32) 0.5

(12.70)

0.2

(5.08)

0.60

(15.24)

1.25

(31.76)

1.90

(48.26)

0.15

(3.82)

0.256 (6.50) Diameter

Stand-off (4 Places)

Metric (Suffix '-M'):

M3 Tap Thru. 4 places or

Imperial (No '-M' suffix) 4-

40 UNC (Optional)

0.043 ±0.003(1.02 ±0.05)

Diameter Typ.

TOLERANCE : ± 0.004 (0.1)

(Unless otherwise specified)

2.20 ±0.02

(

0 ±0.50

)