Specifications are subject to change without notice (11.05.05) 1
Housing Ordering no. Ordering no.
W x H x D Receiver without timer Emitter
25 x 65 x 81
PG 13.5 cable gland PMT 20R G PMT 20 GM
1/2" NPT cable gland PMT 20R I PMT 20 IM
Photoelectrics
•Range: 20 m
•Modulated, infrared light
•LED-indication for power supply ON (emitter)
and target detected (receiver)
•Multi supply voltage:
24 VDC and 24 VAC, 50/60 Hz
•25 x 65 x 81 mm reinforced PC housing, IP 67
Product Description Ordering Key
Through-beam photoelectric
switch. Range up to 20 m.
Immune to ambient light.
Precise detection through
narrow beam. LED-indication.
Protection degree IP 67.
Screw terminal connection.
25 x 65 x 81 mm plastic
housing. PG 13.5 or 1/2"
NPT cable gland. With Mute
Input on the transmitter the
sensor fullfill EN12978
Type
Receiver
Cable gland
Mute Input
Type Selection
Specifications Emitter Specifications Receiver
Rated operational volt. (UB)
24 VDC ± 20%
AC: 45 to 65 Hz 24 VAC ± 20%
Rated operational power ≤1 W (1.2 VA)
Light source GaAIAs LED, 880 nm
Light type Infrared, modulated
Optical angle ±2°
Indication
Power supply ON LED, green
Output function Switch selectable, make or
break switching
Rated operational volt. (UB)10.8 to 264 VDC
AC: 45 to 65 Hz 21.6 to 264 V AC
Rated operational power
(Relay ON) ≤2 W (2.5 VA)
Output
Contact ratings (AgCdO) µ (micr o gap)
Resistive loads AC 1 3 A/250 V AC
DC 1 3 A/30 VDC
Small inductive loads AC 15 2 A/250 V AC
DC 13 3 A/30 VDC
Mechanical life ≥40 x 106operations
Electrical life ≥5 x 105operations
at 220 V AC - 3 A r esistive
load: 360 impulses/h
Dielectric voltage
2 kV AC
(rms)
(cont./supply)
Sensitivity Adjustable, single turn pot.
Optical angle ±2°
Rated operating dist. (Sn)
(0 to 5,000 lux) 20 m
Operating frequency (f) 20 Hz
Response time OFF-ON (tON)≤20 ms
ON-OFF (tOFF)≤20 ms
Power ON delay ( tv)≤300 ms (typ. 100 ms)
Output function Mute function
Thr ough-beam, Industrial Door Market
Type PMT20.M, Mute Input
PMT20 R G M