Film Capacitors
EMI Suppression Capacitors (MKP)
Series/Type: B81130
Date: August 2004
© EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical
and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Associ-
ation), unless otherwise agreed.
Typical applications
X2 class for interference suppression
"Across the line" applications
Climatic
Max. operating temperature: 100 °C
Climatic category (IEC 60068-1): 40/100/21
Construction
Dielectric: polypropylene (MKP)
Plastic case (UL 94 V-0)
Epoxy resin sealing (UL 94 V-0)
Features
Small dimensions
Self-healing properties
Terminals
Parallel wire leads, lead-free tinned
Standard lead lengths: 6 1 mm
Special lead lengths available on request
Marking
Manufacturer's logo, lot number,
date code, rated capacitance (coded),
cap. tolerance (code letter),
rated AC voltage,
series number, sub-class (X2),
dielectric code (MKP), climatic category,
passive flammability category, approvals.
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel)
For taping details, refer to chapter
"Taping and packing".
Dimensional drawing
Dimensions in mm
Lead spacing
±0.4
Lead diameter d1
10 mm 0.6
15 ... 27.5 mm 0.8
Marking examples
= 10 mm ≥15 mm/CR≤1µF
= 27.5 mm/CR>1 µF
Approvals
Marks of conformity Standards Certificate
EN 132400, IEC 60384-14 138554
UL 1414 / UL 1283 E97863 / E157153
CSA C22.2 No.1 E97863
CQC (GB/T 14472-1998) CQC02001001667
EMI suppression capacitors (MKP) B81130
X2 / 275 VAC
Not for new design
2
Overview of available types
Lead spacing 10 mm 15 mm 22.5 mm 27.5 mm
CR(µF)
0.010
0.015
0.022
0.033
0.047
0.056
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
B81130
X2 / 275 VAC
Not for new design
3
Ordering codes and packing units
Lead spacing
mm
CR
µF
Max. dimensions
w×h×l
mm
Ordering code
(composition see
below)
Ammo
pack
pcs./unit
Reel
pcs./unit
Untaped
pcs./unit
Further E series and intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code: *** = Packaging code:
M = ±20%
K = ±10%
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 6 1 mm)
(Closer tolerances on request)
10 0.010 4.0 ×9.0 ×13.0 B81130C1103+*** 1000 1700 1000
0.015 4.0 ×9.0 ×13.0 B81130C1153+*** 1000 1700 1000
0.022 5.0 ×11.0 ×13.0 B81130C1223+*** 830 1300 1000
0.033 5.0 ×11.0 ×13.0 B81130C1333M*** 830 1300 1000
0.033 6.0 ×12.0 ×13.0 B81130A1333+*** 680 1100 1000
0.047 6.0 ×12.0 ×13.0 B81130C1473+*** 680 1100 1000
15 0.022 5.0 ×10.5 ×18.0 B81130B1223+*** 1170 1300 1000
0.033 5.0 ×10.5 ×18.0 B81130B1333+*** 1170 1300 1000
0.047 5.0 ×10.5 ×18.0 B81130B1473+*** 1170 1300 1000
0.056 5.0 ×10.5 ×18.0 B81130C1563M*** 1170 1300 1000
0.068 6.0 ×11.0 ×18.0 B81130C1683+*** 960 1100 1000
0.10 6.0 ×12.0 ×18.0 B81130C1104M*** 960 1100 1000
0.10 7.0 ×12.5 ×18.0 B81130A1104+*** 830 900 1000
0.15 8.5 ×14.5 ×18.0 B81130C1154+*** 680 700 500
0.22 9.0 ×17.5 ×18.0 B81130C1224+*** 640 700 500
22.5 0.15 6.0 ×15.0 ×26.5 B81130B1154+*** 680 700 720
0.22 7.0 ×16.0 ×26.5 B81130B1224+*** 580 600 630
0.33 8.5 ×16.5 ×26.5 B81130C1334+*** 480 500 510
0.47 10.5 ×16.5 ×26.5 B81130C1474M*** 390 400 540
0.47 10.5 ×18.5 ×26.5 B81130A1474+*** 390 400 540
0.68 11.0 ×20.5 ×26.5 B81130C1684+*** 370 350 510
27.5 0.47 11.0 ×21.0 ×31.5 B81130B1474+*** 350 320
0.68 11.0 ×21.0 ×31.5 B81130B1684+*** 350 320
1.0 12.5 ×21.5 ×31.5 B81130C1105M*** 300 280
1.0 13.5 ×23.0 ×31.5 B81130A1105+*** 250 260
1.5 15.0 ×24.5 ×31.5 B81130C1155M*** 240
1.5 18.0 ×27.5 ×31.5 B81130A1155+*** 200
2.2 18.0 ×27.5 ×31.5 B81130C1225M*** 200
2.2 19.0 ×30.0 ×31.5 B81130A1225+*** 180
B81130
X2 / 275 VAC
Not for new design
4
Technical data
Max. operating temperature Top,max +100 °C
Dissipation factor tan δ(in 10-3)
at 20 °C (upper limit values)
CR≤0.1 µFCR> 0.1 µF
at 1 kHz 1.0 1.0
100 kHz 5.0
Insulation resistance Rins CR≤0.33 µF CR> 0.33 µF
or time constant τ= CRRins 100 000 MΩ30 000 s
at 20 °C, rel. humidity ≤65%
(minimum as-delivered values)
DC test voltage 2121 V, 2 s
Passive flammability category
to IEC 40 (CO) 752
B
Maximum continuous AC voltage (VAC) 310 V (50/60 Hz)
Rated AC voltage (IEC 60384-14) 275 V (50/60 Hz)
Maximum continuous DC voltage (VDC) 760 V
Operating AC voltage Vop at high
temperature
TA≤100 °C Vop = VAC (continuously)
TA≤100 °C Vop = 1.25 VAC (1000 h)
Damp heat test 21 days / 40 °C / 93% relative humidity
Limit values after damp heat test Capacitance change ∆C/C≤5%
Dissipation factor change ∆tan δ ≤ 0.5 10-3 (at 1 kHz)
Insulation resistance Rins ≤1.0 10-3 (at 10 kHz)
or time constant τ= CRRins ≥50% of minimum
as-delivered values
B81130
X2 / 275 VAC
Not for new design
5
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt and k0values
Lead spacing 10 mm 15 mm 22.5 mm 27.5 mm
dV/dt in V/µs550 400 200 150
k0in V2/µs429 000 312 000 156 000 117 000
Impedance Z versus frequency f
(typical values)
B81130
X2 / 275 VAC
Not for new design
6
