SD2000C..L SERIES
STANDARD RECOVERY DIODES Hockey Puk Version
2100A
Bulletin I2088/A
Features
Wide current range
High voltage ratings up to 1000V
High surge current capabilities
Diffused junction
Hockey Puk version
Case style DO-200AB (B-PUK)
Typical Applications
Converters
Power supplies
High power drives
Auxiliary system supplies for traction applications
Major Ratings and Characteristics
IF(AV) 2100 A
@ Ths 55 °C
IF(RMS) 3900 A
@ Ths 25 °C
IFSM @ 50Hz 23900 A
@ 60Hz 25000 A
I2t@ 50Hz 2857 KA2s
@ 60Hz 2608 KA2s
VRRM range 400 to 1000 V
TJ- 40 to 180 °C
Parameters SD2000C..L Units
case style DO-200AB (B-PUK)
Next Data SheetIndex
Previous Datasheet
To Order
SD2000C..L Series
Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max.
Type number Code peak reverse voltage repetitive peak rev. voltage @ TJ = 180°C
V V mA
04 400 500
SD2000C..L 08 800 900 60
10 1000 1100
ELECTRICAL SPECIFICATIONS
Voltage Ratings
IF(AV) Max. average forward current 2100 (1040) A180° conduction, half sine wave
@ Heatsink temperature 55 (85) °C Double side (single side) cooled
IF(RMS) Max. RMS forward current 3900 A@ 25°C heatsink temperature double side cooled
IFSM Max. peak, one-cycle forward, 23900 t = 10ms No voltage
non-repetitive surge current 25000 t = 8.3ms reapplied
20100 t = 10ms100% VRRM
21000 t = 8.3ms reapplied Sinusoidal halfwave,
I2tMaximum I2t for fusing 2857 t = 10ms No voltage Initial TJ = TJ max.
2608 t = 8.3ms reapplied
2020 t = 10ms 100% VRRM
1844 t = 8.3ms reapplied
I2√tMaximum I2√t for fusing 28570 KA2√st = 0.1 to 10ms, no voltage reapplied
VF(TO)1 Low level value of threshold
voltage
VF(TO)2 High level value of threshold
voltage
rf1Low level value of forward
slope resistance
rf2High level value of forward
slope resistance
VFM Max. forward voltage drop 1.55 VIpk= 6000A, TJ = TJ max, tp = 10ms sinusoidal wave
A
KA2s
0.74 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
Parameter SD2000C..L Units Conditions
Forward Conduction
V
mΩ
0.13 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
0.86 (I > π x IF(AV)),TJ = TJ max.
0.12 (I > π x IF(AV)),TJ = TJ max.
Next Data SheetIndex
Previous Datasheet
To Order
SD2000C..L Series
Fig. 4 - Current Ratings Characteristics
Fig. 5 - Forward Power Loss Characteristics Fig. 6 - Forward Power Loss Characteristics
Fig. 3 - Current Ratings Characteristics
Fig. 8 - Maximum Non-Repetitive Surge CurrentFig. 7 - Maximum Non-Repetitive Surge Current
To Order
Next Data SheetIndex
Previous Datasheet
SD2000C..L Series
∆RthJ-hs Conduction
(The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC)
Ordering Information Table
1-Diode
2-Essential part number
3-0 = Standard recovery
4-C = Ceramic Puk
5-Voltage code: Code x 100 = VRRM (see Voltage Ratings Table)
6-L = Puk Case DO-200AB (B-PUK)
1 2 34 5 6
Device Code SD 200 0 C10 L
Sinusoidal conduction Rectangular conduction
Conduction angle Units Conditions
Single Side Double Side Single Side Double Side
180° 0.009 0.009 0.006 0.006
120° 0.011 0.011 0.011 0.011
90° 0.014 0.014 0.015 0.015 K/W TJ = TJ max.
60° 0.020 0.020 0.021 0.021
30° 0.036 0.036 0.036 0.036
TJMax. junction operating temperature range -40 to 180
Tstg Max. storage temperature range -55 to 200
RthJ-hs Max. thermal resistance, junction 0.073 DC operation single side cooled
to heatsink 0.031 DC operation double side cooled
FMounting force, ± 10% 14700 N
(1500) (Kg)
wt Approximate weight 255 g
Case style DO-200AB(B-PUK) See Outline Table
Parameter SD2000C..L Units Conditions
Thermal and Mechanical Specifications
°C
K/W
To Order
Next Data SheetIndex
Previous Datasheet
SD2000C..L Series
Outline Table
Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics
BOTH ENDS
0.8 (0.03) TWO PLACES
3.5(0.14) DIA. NOM. x
1.8(0.07) DEEP MIN.
34 (1.34) DIA. MAX.
58.5 (2.30) DIA. M AX.
26.9 (1.06)
25.4 (1)
BOTH ENDS
53 (2.09) DIA. MAX.
Case Style DO-200AB (B-PUK)
All dimensions in millimeters (inches)
To Order
Next Data SheetIndex
Previous Datasheet
