2N3584 MECHANICAL DATA Dimensions in mm (inches) 6.35 (0.250) 8.64 (0.340) 2 11.94 (0.470) 12.70 (0.500) 1 0.71 (0.028) 0.86 (0.034) 3.61 (0.142) 4.08(0.161) rad. 14.48 (0.570) 14.99 (0.590) 24.13 (0.95) 24.63 (0.97) 3.68 (0.145) rad. max. Bipolar NPN Device in a Hermetically Sealed TO66 Metal Package APPLICATIONS Intended for High Speed Switching and Linear Amplifier Applications. 1.27 (0.050) 1.91 (0.750) 4.83 (0.190) 5.33 (0.210) 9.14 (0.360) min. TO66 (TO213AA) Pin 1 = Base Pin 2 = Emitter Case = Collector ABSOLUTE MAXIMUM RATINGS TCASE = 25C unless otherwise stated VCBO VCEO VEBO IC IB Ptot TJ Tstg Collector - Base Voltage Collector - Emitter Voltage Emitter - Base Voltage Collector Current - Continuous Peak Base Current Total Power Dissipation at Tcase = 25C Derate above 25C Junction Temperature Storage Temperature 375V 250V 6V 2A 5A 1A 35W 0.2W/C 200C -65 to 200C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7478, ISSUE 1 2N3584 THERMAL CHARACTERISTICS Rth j-case Thermal resistance to case Max. Unit 5.0 C/W ELECTRICAL CHARACTERISTICS (Tcase=25C unless otherwise stated) Parameter Test Conditions IC = 10mA VBE(sat)* Collector-Emitter Breakdown Voltage Collector to Emitter Saturation Voltage Base to Emitter Saturated Voltage VBE* ICEO V(BR)CEO* VCE(sat)* ICEV Min. Typ. Max. 250 IC = 1.0A IB = 125mA 0.75 IC = 1.0A IB = 100mA 1.4 Base-Emitter Voltage VCE = 10V IC = 1.0A 1.4 Collector Cut-Off Current VCE = 150V IB = 0 5.0 VCE = 340V VBE = -1.5V 1.0 VCE = 300V VBE = -1.5V Collector Cut-Off Current 3.0 TCase = 150C IEBO Emitter Cut-Off Current IC = 0 IC = 100mA hFE* Forward-current transfer ratio IC = 1.0A IC = 1.0A Unit VEB = 6.0V VCE = 10V VCE = 2.0V V mA 0.5 40 25 100 8.0 80 DYNAMIC CHARACTERISTICS Tr Rise Time VCC=200V 3.0 Ts Storage Time IC=1.0A 4.0 Tf Fall Time IB1=-IB2=0.1A 3.0 Cob Output Capacitance IE = 0 VCB = 10V 120 f = 1.0MHz FT Transition Frequency IC = 200mA f = 5MHz VCE = 10V 10 s pF MHz * Pulse test tp = 300s, < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7478, ISSUE 1