SXE15 Series Dual positive outpu L" Distributed By: (| _B. J. Wolfe Enterprises MW www.bjwe.com + (800) 554-1224 + (818) 889-8412 DC/DC CONVERTERS Two positive outputs * Output voltage tracking * High efficiency * Approved to EN60950, UL/cUL1950 * Wide operating temperature, up to and exceeding 65C (natural convection) * Up to 100% load imbalance * Trim function * No minimum load * Complies with ETS 300 019-1-3/2-3 * Fully compliant with ETS 300 386-1 15W High Efficiency DC/DC Converters The SXE15 is a new high efficiency open frame isolated 15 Watt converter series. The first two models in the series feature an input voltage range of 33 to 75VDC and are available in output voltages of 5V/3.3V and 3.3V/2.5V. The output voltage on each model is adjustable from 90% to 110% of the nominal value. Typical efficiencies for the models are 86% for the 5V/3.3V and 85% for the 3.3V/2.5V version. The SXE15 series also has a remote or/off capability, with active high or active low logic. Overcurrent and overvoltage protection features are included as standard. With full international safety approval including EN60950 and cUL1950, the SXE15 reduces compliance costs and time to market. All specifications are typical at nominal input, full load at 25C unless otherwise stated OUTPUT SPECIFICATIONS C vo) Als TUV 2 YEAR WARRANTY SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability Both outputs +10% min. ETS 300 386-1 table 5 ; Conducted emissions | EN55022 (See Note 6) Level A Voltage setpoint Both outputs +2% typ. EN55022 (See Note 6) Level B Voltage accuracy Both outputs +4% max. Radiated emissions EN55022 (see Longform data sheet) Level B (See Note 8) Immunity: ESD air EN61000-4-2 8kV, 15kV Output voltage 5V/3.3V 4.931V < Vo4 < 5.133V ESD contact EN61000-4-2 6kV, 8kV (over all line and 3.236V < Voo < 3.368V EFT DC power EN61000-4-4 2kV, 4kV load conditions) 3.3V/2.5V 3.297V < Vor < 3.431V EFT signal EN61000-4-4 1kV, 2kV 2.431V <Vo2 <2.531V | Radiated field enclosure EN61000-4-3 10V/m Mini 0% Surges indoor signal EN61000-4-5 5S00V inimum load | Conducted (DC power) EN61000-4-6 10V Ripple and noise 140mV pk-pk max. Conducted (signal) EN61000-4-6 10V (See Note 7) 20MHz bandwidth 50mvV rms max. Input transients ETS 300 132-2, ETR 283 Transient response D05-3V3, Vo, 180mV max. GENERAL SPECIFICATIONS 50% to 75% to 50% D05-3V3, Voo 100mVmax. _ D3V3-2V5, Vo, 150mV max. Efficiency See table D3V3-2V5, Voo 100mV max. ; ; ; Peak dev. settling time To 1.0%, no external cap. 100ps Operational insulation input/output Eevee Short circuit protection 10A rms Continuous a CALNE DTN) (Isc) automatic recovery Switching frequency Fixed 265kHz Tracking Max. differential 0.7V during Approvals and UL/cUL 1950, EN60950 start-up standards TUV Rheinland See Notes 1, 2 and 3 INPUT SPECIFICATIONS (See Notes 1, 2 and 3) Weight 12g (0.4202) Input voltage range 48Vin nominal 33 to 75VDC 9 ci ) nN A MTBF MIL-HDBK-217F >600,000 hours ela MO oat OFF SomA max. | Representative model: 48805 @ 48Vin, 40C, ene Dens 100% load ground benign UVLO turn ON voltage 33V (typ) BELLCORE 332 >1,500,000 hours VLO turn OFF volt 30V (t UVLO turn OFF voltage (yp) | PReeeereymerrsrrey ctl Active high remote ON/OFF (See Note 4) . . . . Logic compatibility Open collector ref. to -input Thermal performance Operating ambient -40C to +65C, ON Open circuit or >2VDC (See Note 5) temperature OFF <1.2VDC Non-operating -40C to +120C Start-up time Nominal line 2.5ms (typ)Distributed By: SXE15 Series REAL, BS Male Emterpises Dual positive output (800)554-1224 (818) 889-8412 DC/DC CONVERTERS | 15W High Efficiency DC/DC Converters For the most current data and application support visit www.artesyn.com/powergroup/products.htm E INPUT OUTPUT VOLTAGE OUTPUT CURRENT TYPICAL MODEL VOLTAGE | 2 | Py EFFICIENCY NUMBER (4 33-75VDC 5V 3.3V 3.0A 4.5A 6.2V 4.2V 86% SXE15-48D05-3V3 33-75VDC 3.3V 2.5V 3.5A 4.5A 4.0V 3.0V 85% SXE15-48D3V3-2V5 Notes 4 User must provide recommended fuses in order to comply with safety approvals. 2 Maximum continuous output power. 15 Watts for D05-3V3 model. 11.55 Watts for D3V3-2V5 model. 3 Maximum temperature on hot spots not to exceed 115C. Refer to Longform data sheet for details. 4 Active low remote on/off is available. Standard product is active high. Designate with the suffix '-R, e.g. SXE15-48D05-3V3-R. Operating ambient temperatures are specified at natural convection. Higher operating temperatures with increased airflow. See Application Note 116 for further details. _ Ol, aopnyi~ OD! ati wo] rm 6 Measured with external filter. See Application Note 116 for further details. 7 Signal line assumed <3m in length. 8 This parameter is calculated at worst case line, load, temperature and initial conditions. [+ 1.005 {48.39}. overall jength 10 N/C nog Ulan! jot rasoge2n [OO A 1.990 (95.31) 1 Vin - TOP VIEW s =| co = 12 Vin + }e a2 rn jeadtrame length CAUTION: Hazardous internal voitages 2.070 (1.76) MAK and high temperatures. Ensure that unit is Pl pe Teor not user accessible. L 1.812 (46.03) an | 0.010 (0.25) Min SIDE EW Tolerence: +,.015(t.38) Recommended Land & Role Pattern 1,875 (40:01} nnn] + 0,107 (5.00) ooo 00a 0,904 {10.01 oet a . Borrom view n | pone "20.089 (01.60) 06941 aaa (o0s see ace FF care cat] 9 7 Reac pra, 0.502 (12:75 ONC Sate | R " 2 Paces m oo noo = ; atin? 0.490 @.30), o.0ssit:9e; ef he AaH 1.48 (30.00) 0.060 {1.74) [~ [ .978 85.00)" * 0.197 (5.00) Be L pees pseoon of All Dimensions in Inches [mm] 1.181 (80.00) 1.378 (35.00) 1.575 (40.01) International Safety Standard Approvals cWAdus UL/cUL 1950 3rd edition. File No. E135734 TUV TUV Rheinland. Certificate No. R2074133