SA5.0CA Series 500 Watt Peak Power MiniMOSORB Zener Transient Voltage Suppressors Bidirectional* http://onsemi.com The SA5.0CA series is designed to protect voltage sensitive components from high voltage, high-energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SA5.0CA series is supplied in ON Semiconductor's exclusive, cost-effective, highly reliable Surmetic axial leaded package and is ideally-suited for use in communication systems, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. Specification Features: * * * * * * * * Working Peak Reverse Voltage Range - 5.0 to 170 V Peak Power - 500 Watts @ 1 ms ESD Rating of Class 3 (>16 KV) per Human Body Model Maximum Clamp Voltage @ Peak Pulse Current Low Leakage < 1 A above 8.5 V UL 497B for Isolated Loop Circuit Protection Maximum Temperature Coefficient Specified Response Time is typically < 1 ns AXIAL LEAD CASE 59 PLASTIC Mechanical Characteristics: CASE: Void-free, Transfer-molded, Thermosetting plastic FINISH: All external surfaces are corrosion resistant and leads are readily solderable L SA xxxCA YYWW MAXIMUM LEAD TEMPERATURE FOR SOLDERING PURPOSES: 230C, 1/16 from the case for 10 seconds POLARITY: Cathode band does not imply polarity MOUNTING POSITION: Any L = Assembly Location SAxxxCA = ON Device Code YY = Year WW = Work Week MAXIMUM RATINGS Symbol Value Unit Peak Power Dissipation (Note 1) @ TL 25C Rating PPK 500 Watts Steady State Power Dissipation @ TL 75C, Lead Length = 3/8 Derated above TL = 75C PD 3.0 Watts 30 mW/C 33.3 C/W Thermal Resistance, Junction-to-Lead RJL Operating and Storage Temperature TJ, Tstg - 55 to +175 C Range 1. Nonrepetitive current pulse per Figure 3 and derated above TA = 25C per Figure 2. *Please see SA5.0A to SA170A for Unidirectional devices. Semiconductor Components Industries, LLC, 2002 February, 2002 - Rev. 2 1 ORDERING INFORMATION Device Package Shipping SAxxxCA Axial Lead 1000 Units/Box SAxxxCARL Axial Lead 5000/Tape & Reel Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. Publication Order Number: SA5.0CA/D SA5.0CA Series ELECTRICAL CHARACTERISTICS I (TA = 25C unless otherwise noted) Symbol IPP Parameter IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM IR VBR IT VBR IT VC VBR VRWM IR IR V RWM VBR VC IT Working Peak Reverse Voltage V Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT IPP Test Current Bi-Directional TVS Maximum Temperature Variation of VBR ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted.) Breakdown Voltage VRWM (Note 2) IR @ VRWM (Volts) (A) Min Nom VBR VC @ IPP (Note 4) @ IT VC IPP VBR Max (mA) (Volts) (A) (mV/C) (Note 3) (Volts) Device Device Marking SA5.0CA SA6.0CA SA6.5CA SA7.0CA SA5.0CA SA6.0CA SA6.5CA SA7.0CA 5 6 6.5 7 600 600 400 150 6.4 6.67 7.22 7.78 6.7 7.02 7.60 8.19 7 7.37 7.98 8.6 10 10 10 10 9.2 10.3 11.2 12 54.3 48.5 44.7 41.7 5 5 5 6 SA7.5CA SA8.0CA SA8.5CA SA9.0CA SA7.5CA SA8.0CA SA8.5CA SA9.0CA 7.5 8 8.5 9 50 25 5 1 8.33 8.89 9.44 10 8.77 9.36 9.92 10.55 9.21 9.83 10.4 11.1 1 1 1 1 12.9 13.6 14.4 15.4 38.8 36.7 34.7 32.5 7 7 8 9 SA10CA SA11CA SA12CA SA13CA SA10CA SA11CA SA12CA SA13CA 10 11 12 13 1 1 1 1 11.1 12.2 13.3 14.4 11.7 12.85 14 15.15 12.3 13.5 14.7 15.9 1 1 1 1 17 18.2 19.9 21.5 29.4 27.4 25.1 23.2 10 11 12 13 SA14CA SA15CA SA16CA SA17CA SA14CA SA15CA SA16CA SA17CA 14 15 16 17 1 1 1 1 15.6 16.7 17.8 18.9 16.4 17.6 18.75 19.9 17.2 18.5 19.7 20.9 1 1 1 1 23.2 24.4 26 27.6 21.5 20.6 19.2 18.1 14 16 17 19 SA18CA SA20CA SA22CA SA24CA SA18CA SA20CA SA22CA SA24CA 18 20 22 24 1 1 1 1 20 22.2 24.4 26.7 21.05 23.35 25.65 28.1 22.1 24.5 26.9 29.5 1 1 1 1 29.2 32.4 35.5 38.9 17.2 15.4 14.1 12.8 20 23 25 28 SA26CA SA28CA SA30CA SA33CA SA26CA SA28CA SA30CA SA33CA 26 28 30 33 1 1 1 1 28.9 31.1 33.3 36.7 30.4 32.75 35.05 38.65 31.9 34.4 36.8 40.6 1 1 1 1 42.1 454 48.4 53.3 11.9 11 10.3 9.4 30 31 36 39 SA36CA SA40CA SA43CA SA45CA SA36CA SA40CA SA43CA SA45CA 36 40 43 45 1 1 1 1 40 44.4 47.8 50 42.1 46.55 50.3 52.65 44.2 49.1 52.8 55.3 1 1 1 1 58.1 64.5 69.4 72.7 8.6 7.8 7.2 6.9 41 46 50 52 SA48CA SA51CA SA58CA SA60CA SA48CA SA51CA SA58CA SA60CA 48 51 58 60 1 1 1 1 53.3 56.7 64.4 66.7 56.1 59.7 67.8 70.2 58.9 62.7 71.2 73.7 1 1 1 1 77.4 82.4 93.6 96.8 6.5 6.1 5.3 5.2 56 61 70 71 NOTES: 2. MiniMOSORB transient suppressors are normally selected according to the maximum working peak reverse voltage (VRWM), which should be equal to or greater than the dc or continuous peak operating voltage level. 3. VBR measured at pulse test current IT at an ambient temperature of 25C. 4. Surge current waveform per Figure 3 and derate per Figures 1 and 2. http://onsemi.com 2 SA5.0CA Series ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted.) Breakdown Voltage VRWM (Note 5) IR @ VRWM (Volts) (A) Min Nom VBR VC @ IPP (Note 7) @ IT VC IPP VBR Max (mA) (Volts) (A) (mV/C) (Note 6) (Volts) Device Device Marking SA64CA SA70CA SA78CA SA85CA SA64CA SA70CA SA78CA SA85CA 64 70 78 85 1 1 1 1 71.1 77.8 86.7 94.4 74.85 81.9 91.25 99.2 78.6 86 95.8 104 1 1 1 1 103 113 126 137 4.9 4.4 4.0 3.6 76 85 95 103 SA90CA SA100CA SA110CA SA120CA SA90CA SA100CA SA110CA SA120CA 90 100 110 120 1 1 1 1 100 111 122 133 105.5 117 128.5 140 111 123 135 147 1 1 1 1 146 162 177 193 3.4 3.1 2.8 2.5 110 123 133 146 SA130CA SA150CA SA160CA SA170CA SA130CA SA150CA SA160CA SA170CA 130 150 160 170 1 1 1 1 144 167 178 189 151.5 176 187.5 199 159 185 197 209 1 1 1 1 209 243 259 275 2.4 2.1 1.9 1.8 158 184 196 208 NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 3 10 1 0.1 0.1 ms 1 ms 10 ms VALUE (%) 1 ms 60 40 20 10 ms 0 Figure 1. Pulse Rating Curve Figure 2. Pulse Derating Curve PULSE WIDTH (tp) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAYS TO 50% OF IPP. PEAK VALUE - IPP IPP 2 50 tP 0 80 tp, PULSE WIDTH HALF VALUE - 0 100 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (C) tr 10s 100 100 ms PD, STEADY STATE POWER DISSIPATION (WATTS) PP K , PEAK POWER (kW) 100 PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT @ TA = 25 C NOTES: 5. MiniMOSORB transient suppressors are normally selected according to the maximum working peak reverse voltage (VRWM), which should be equal to or greater than the dc or continuous peak operating voltage level. 6. VBR measured at pulse test current IT at an ambient temperature of 25C. 7. Surge current waveform per Figure 3 and derate per Figures 1 and 2. 1 2 3 4 t, TIME (ms) 0 25 5 4 3/8 3/8 3 2 1 0 0 25 50 75 100 125 150 175 200 TL, LEAD TEMPERATURE (C) Figure 3. Pulse Waveform Figure 4. Steady State Power Derating http://onsemi.com 3 SA5.0CA Series UL RECOGNITION* Breakdown test, Endurance Conditioning, Temperature test, Dielectric Voltage-Withstand test, Discharge test and several more. Whereas, some competitors have only passed a flammability test for the package material, we have been recognized for much more to be included in their protector category. The entire series including the bidirectional CA suffix has Underwriters Laboratory Recognition for the classification of protectors (QVGV2) under the UL standard for safety 497B and File #E 116110. Many competitors only have one or two devices recognized or have recognition in a non-protective category. Some competitors have no recognition at all. With the UL497B recognition, our parts successfully passed several tests including Strike Voltage *Applies to SA5.0A, CA - SA170A, CA. OUTLINE DIMENSIONS Transient Voltage Suppressors - Axial Leaded 500 Watt Peak Power MiniMOSORB B K MINI MOSORB CASE 59-09 ISSUE R NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 59-04 OBSOLETE, NEW STANDARD 59-09. 4. 59-03 OBSOLETE, NEW STANDARD 59-10. 5. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY. 6. POLARITY DENOTED BY CATHODE BAND. 7. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. D A DIM A B D K K INCHES MIN MAX 0.228 0.299 0.102 0.142 0.028 0.034 1.000 --- MILLIMETERS MIN MAX 5.80 7.60 2.60 3.60 0.71 0.86 25.44 --- MiniMOSORB and Surmetic are trademarks of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 4 SA5.0CA/D