Part Number 856526 810 MHz SAW Filter Data Sheet Features * * * * * * * * For WiMAX applications Usable bandwidth 10 MHz High attenuation No impedance matching required for operation at 50 Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm SMP-12 Bottom View 1 2 3 6 5 4 1.22 NOM. 1.32 MAX. 0.69 3.00 0.75 Single-ended Configuration Pin No. Description 2 Input 5 Output 1,3,4,6 Case ground 1.50 3.00 0.75 0.60 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev A 06/08 (c) TriQuint Semiconductor Page 1 of 5 Part Number 856526 810 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 C Parameter (3) Minimum Typical (4) Maximum Unit - 810 - MHz - 3.5 5.0 dB - 0.7 2.0 dB - 40 150 ns 50 30 20 10 10 20 30 50 - 58 47 42 30 30 40 47 56 50 50 - dB dB dB dB dB dB dB dB Center Frequency Maximum Insertion Loss 805 - 815 MHz Amplitude Ripple (5) 805 - 815 MHz Group Delay Variation 805 - 815 MHz Absolute Attenuation 10 - 760 MHz 760 - 790 MHz 790 - 792 MHz 792 - 794.5 MHz 825.5 - 828 MHz 828 - 830 MHz 830 - 860 MHz 860 - 1300 MHz Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Amplitude ripple is defined as the worst case difference between the peak and adjacent valley within the defined frequency points 6. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 50 Single-ended Input No impedance matching required Subject to change or obsolescence without notice 2 50 5 50 1,3,4,6 Rev A 06/08 50 Single-ended Output No impedance matching required (c) TriQuint Semiconductor Page 2 of 5 Part Number 856526 810 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev A 06/08 (c) TriQuint Semiconductor Page 3 of 5 Part Number 856526 810 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 2 50 Single-ended Input No impedance matching required 50 50 Single-ended Output No impedance matching required 5 50 1,3,4,6 Marking PCB Footprint 3.20 SQ .96 Marking code Sawtek logo 1.70 CB JJJYM 1.27 .81 .38 ID dot Date code The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 12.8 2.7 4.0 Sawtek logo O330 0.21 2.0 O1.5 A 1.75 5.5 ID dot O102 O20.2 O13.0 2.0 12.0 3.25 Direction of travel 1.4 3.25 4.0 A O1.5 Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Rev A 06/08 (c) TriQuint Semiconductor Page 4 of 5 Part Number 856526 810 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Unit o C C o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev A 06/08 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 5 of 5