1
The FMS series connectors are designed
for surface mounting (SMT) and to meet
the demand for high-density packaging.
They are miniature connectors with a
height of only 2.8mm, and can be supplied
packaged in embossed tape to facilitate
automatic mounting.
Features ––––––––––––––––––––––––
• Compact
This connector measures 1.0mm in pitch, 2.8mm in mounting
height, and 6.3mm in width.
• Double-sided contact
This connector has highly resilient phosphor bronze contacts,
each of which has two independent mating spring members
that ensure continuity even when subjected to severe vibration.
Because each of the contacts simultaneously mates with both
sides of the FFC, the engineer has greater freedom in designing
his circuitry.
• Simple snap-in action
The FFC is securely connected by simply inserting its leads
into the connector.
• SMT configuration
Its housing is made of heat resistant resin so that it is not
adversely affected during reflow soldering. Because of its tiny
size and ability to be surface mounted, this connector meets
the demand for high-density mounting of components inside
electronic products.
• Solder tabs
This connector also features reinforcing solder tabs to prevent
lifting of the connector during mating and unmating.
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ωmax.
After environmental testing/30m Ωmax.
• Insulation resistance: 800M Ωmin.
• Withstanding voltage: 500V AC/minute
• Applicable FFC: Conductor pitch/1.0mm
Conductor width/0.7mm
Mating part thickness/0.30±0.05mm
<Note
>
FFC to be actually used should be checked for applicability.
*Compliant with RoHS.
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
FMS CONNECTOR
Connectors for FFC
1.0mm
pitch
Emboss Tape
2
FMS CONNECTOR
Lead section dimensions of FFC–––––––––––––––––––––––––––––––––––––––––––––
10.0
3.0min.
Base layer
Conductor
Reinforcing layer
Film cover layer
1.0±0.15
1.0x(N+1)±0.12
1.0x(N-1)±0.1
0.7±0.1
1.0±0.15
1.0±0.1 0.3±0.05
Note: N --- Number of circuits
Connector –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
A1.5
1.0
B
5.3
6.3
2.8
0.4
Circuits Model No. Dimensions (mm)
AB
Q'ty /
reel
Material and Finish
3
4
5
6
8
10
11
12
14
03FMS-1.0SP-TF
04FMS-1.0SP-TF
05FMS-1.0SP-TF
06FMS-1.0SP-TF
08FMS-1.0SP-TF
10FMS-1.0SP-TF
11FMS-1.0SP-TF
12FMS-1.0SP-TF
14FMS-1.0SP-TF
2,500
2,500
2,500
2,500
2,500
2,000
2,000
2,000
2,000
2.0
3.0
4.0
5.0
7.0
9.0
10.0
11.0
13.0
5.0
6.0
7.0
8.0
10.0
12.0
13.0
14.0
16.0
Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment)
Housing: PPS, UL94V-0
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
Note: The products listed above are supplied on embossed tape.
RoHS compliance This product displays (LF)(SN) on a label.
PC board layout (viewed from component side) and Assembly layout ––––––––––––––––––
4.0±0.10.8±0.1
FFC
2.8
6.3
5.3
2.5±0.1
0.6±0.05
1.0±0.05
0.75±0.1
Note:
1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. The dimensions above should serve as a guideline.
Contact JST for details.
