2KBP005M thru 2KBP10M 3N253 thru 3N259 Glass Passivated Single-Phase Bridge Rectifier Reverse Voltage 50 to 1000 V Forward Current 2.0 A Case Style KBPM 0.600 (15.24) 0.560 (14.22) 0.125 x 45o (3.2) Features 0.460 (11.68) 0.420 (10.67) 0.500 (12.70) 0.460 (11.68) Dimensions in inches and (millimeters) 60 (15.2) MIN. 0.034 (0.86) 0.028 (0.76) DIA. 0.060 (1.52) 0.160 (4.1) 0.140 (3.6) Mechanical Data 0.105 (2.67) 0.085 (2.16) 0.200 (5.08) 0.180 (4.57) * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * This series is UL listed under Recognized Component Index, file number E54214 * Typical IR less than 0.1A * High case dielectric strength * Ideal for printed circuit boards * High temperature soldering guaranteed: 260C/10 seconds at 5 lbs. (2.3kg) tension Polarity shown on front side of case: positive lead by beveled corner Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on case Mounting Position: Any Weight: 0.06 ounce, 1.7 grams Maximum Ratings & Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. 2KBP 005M 2KBP 01M 2KBP 02M 2KBP 04M 2KBP 06M 2KBP 08M 2KBP 10M SYMBOLS 3N253 3N254 3N255 3N256 3N257 3N258 3N259 UNITS * Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V * Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 * Maximum DC blocking voltage Maximum average forward output rectified current at TA=55C * Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ=150C Rating for fusing (t < 8.3ms) Typical thermal resistance per leg (NOTE 1) * Operating junction and storage temperature range Electrical Characteristics IF(AV) 2.0 IFSM 60 A 2 I2t 15 A sec RJA RJL 30 11 C/W TJ, TSTG -55 to +165 C Ratings at 25C ambient temperature unless otherwise specified. 2KBP 005M * Maximum instantaneous forward voltage drop per leg at 3.14A * Maximum DC reverse current at rated DC blocking voltage per leg V A TA=25C TA=125C Typical junction capacitance per leg at 4.0V, 1MHz 2KBP 01M 2KBP 02M 2KBP 04M 2KBP 06M 2KBP 08M 2KBP 10M SYMBOLS 3N253 3N254 3N255 3N256 3N257 3N258 3N259 UNITS VF 1.1 V IR 5.0 500 A CJ 25 pF NOTES: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x12mm) copper pads * JEDEC registered values 12/21/99 Ratings and Characteristic Curves (T A 2KBP005M thru 2KBP10M 3N253 thru 3N259 = 25C unless otherwise noted) FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG FIG. 1 - DERATING CURVE OUTPUT RECTIFIED CURRENT 60 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 2.0 60 HZ RESISTIVE OR INDUCTIVE LOAD 1.5 P.C.B. MOUNTED WITH 0.47 x 0.47" (12 x 12mm) COPPER PADS 1.0 CAPACITIVE LOAD Ipk/IAV=5.0 Ipk/IAV=10 Ipk/IAV=20 (PER LEG) 0.5 0 20 40 60 50 40 30 20 10 1.0 CYCLE 0 80 100 120 140 TJ=150C SINGLE SINE-WAVE (JEDEC Method) 100 10 1 NUMBER OF CYCLES AT 60 HZ 160 170 AMBIENT TEMPERATURE, C FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG 20 100 TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE TJ=125C INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 1 0.1 10 1 0.1 TJ=25C 0.01 0 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE, pF 100 TJ=25C f=1.0 MHz Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE, VOLTS 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1 0.1 TJ=100C 100 100