0.125 x 45
o
(3.2)
0.600 (15.24)
0.560 (14.22)
0.034 (0.86)
0.028 (0.76)
0.105 (2.67)
0.085 (2.16)
0.160 (4.1)
0.140 (3.6)
0.060
(1.52)
Polarity shown on front side of case: positive lead by beveled corner
0.460 (11.68)
0.420 (10.67) 0.500 (12.70)
0.460 (11.68)
60
(15.2)
MIN.
DIA.
0.200 (5.08)
0.180 (4.57)
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
2KBP 2KBP 2KBP 2KBP 2KBP 2KBP 2KBP
005M 01M 02M 04M 06M 08M 10M
SYMBOLS 3N253 3N254 3N255 3N256 3N257 3N258 3N259 UNITS
* Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
* Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
* Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward output rectified current at TA=55°C IF(AV) 2.0 A
* Peak forward surge current single half sine-wave
superimposed on rated load (JEDEC Method) TJ=150°C IFSM 60 A
Rating for fusing (t < 8.3ms) I2t15A
2sec
Typical thermal resistance per leg (NOTE 1) RΘJA 30
RΘJL 11 °C/W
* Operating junction and storage temperature range TJ, TSTG -55 to +165 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
2KBP 2KBP 2KBP 2KBP 2KBP 2KBP 2KBP
005M 01M 02M 04M 06M 08M 10M
SYMBOLS 3N253 3N254 3N255 3N256 3N257 3N258 3N259 UNITS
* Maximum instantaneous forward voltage drop
per leg at 3.14A VF1.1 V
* Maximum DC reverse current TA=25°C 5.0
at rated DC blocking voltage per leg TA=125°C IR500 µA
Typical junction capacitance per leg at 4.0V, 1MHz CJ25 pF
NOTES:
(1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x12mm) copper pads
* JEDEC registered values 12/21/99
Dimensions in inches
and (millimeters)
2KBP005M thru 2KBP10M
3N253 thru 3N259
Glass Passivated Single-Phase
Bridge Rectifier
Reverse Voltage 50 to 1000 V
Forward Current 2.0 A
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• This series is UL listed under Recognized Component
Index, file number E54214
• Typical IRless than 0.1µA
• High case dielectric strength
• Ideal for printed circuit boards
• High temperature soldering guaranteed:
260°C/10 seconds at 5 lbs. (2.3kg) tension
Mechanical Data
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: Polarity symbols marked on case
Mounting Position: Any
Weight: 0.06 ounce, 1.7 grams
Case Style KBPM
20 40 60 80 100 120 140 160170
0
0.5
1.0
1.5
2.0
0.1 110 100
1
10
100
110 100
0
10
20
30
40
50
60
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
0.01
0.1
1
10
20
020 40 60 80 100
0.01
0.1
1
10
100
FIG. 1 - DERATING CURVE OUTPUT
RECTIFIED CURRENT
AMBIENT TEMPERATURE, °C
60 HZ
RESISTIVE OR
INDUCTIVE LOAD
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
FIG. 3 - TYPICAL FORWARD CHARACTERISTICS
PER LEG
INSTANTANEOUS FORWARD CURRENT,
AMPERES
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
PER LEG
REVERSE VOLTAGE, VOLTS
TJ=25°C
f=1.0 MHz
Vsig=50mVp-p
TJ=25°C
P.C.B.
MOUNTED WITH
0.47 x 0.47”
(12 x 12mm)
COPPER PADS
AVERAGE FORWARD OUTPUT CURRENT,
AMPERES
TJ=100°C
FIG. 4 - TYPICAL REVERSE LEAKAGE
CHARACTERISTICS PER LEG
NUMBER OF CYCLES AT 60 HZ
PEAK FORWARD SURGE CURRENT,
AMPERES
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT PER LEG
TJ=125°C
TJ=150°C
SINGLE SINE-WAVE
(JEDEC Method)
CAPACITIVE LOAD
Ipk/IAV=5.0
Ipk/IAV=10
Ipk/IAV=20
(PER LEG)
JUNCTION CAPACITANCE, pF
1.0 CYCLE
2KBP005M thru 2KBP10M
3N253 thru 3N259
Ratings and Characteristic Curves(TA= 25°C unless otherwise noted)