FTR-K1 SERIES POWER RELAY 1 POLE - 5A Medium Load Control VE Series n FEATURES l l l l l l l l l UL, CSA, VDE, CQC recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in smal package - Higher surge voltage type is available (6,000 V) - 2,000 VAC between coil and contacts Slim type--meets high density mounting requirements Wide operating range Easy circuit design with completely separated terminal arrangement (coil and contact terminals) Plastic sealed type, RTIII Creepage min. 3.2 mm RoHS compliant. Please see page 6 for more information n PARTNUMBER INFORMATION [Example] (a) VE (a) (*) 12 H M S (b) (c) (d) (e) Relay type E - K - HV - VD (f) (g) (h) (i) VE : VE Series (b) Coil rated voltage 12 (c) Contact rating H : 5....48VDC Coil rating table at page 3 (d) Contact configuration Nil M : 1 form C (SPDT) : 1 form A (SPST-NO) (e) Coil type Nil S : Standard type (360mW) : High sensitive type (250mW) (f) Contact material Nil E 5 : Gold overlay silver-nickel (N.C.: 3A, N.O.: 5A) : Silver-nickel (N.C.: 3A, N.O.: 5A) : Silver cadmium oxide (N.C.: 5A, N.O.: 5A) K : Plastic sealed type, RTIII Nil HV : Standard type (4,000V) : High dielectric strength type (6,000V) VD : UL, CSA, VDE approved type (g) Enclosure (h) Surge strength (i) Approvals : Heavy duty type Note: Actual marking omits the hyphen (-) of (*) 1 FTR-K1 SERIES VE SERIES n SPECIFICATION Contact Data Life Coil Data Timing Data Insulation VE-( ) HM(S)E-K VE-( ) HM(S)-K VE-( ) H(S)E-K VE-( ) H(S)-K VE-( ) HM(S)5-K VE-( ) H(S)5-K Configuration 1 form A (SPST-NO) 1 form C (SPDT) 1 form A (SPST-NO) 1 form C (SPDT) Construction Single Material Gold overlay silver nickel, silver nickel, silver-cadmium oxide alloy (AgNi + Au, AgNi, AgCd) Resistance (initial) (at 6 VDC, 1A) Max. 70mOhm (VE-HM, H) Max. 100mOhm (VE-HME, HE) Contact rating (resistive) 5A, 250VAC Max. carrying current 7A Max. switching voltage 250VAC, 150 VDC Max. switching power 5A, 250VAC (N.O.) 3A, 250VAC (N.C.) 5A, 250VAC 1,250VA 1,250VA (N.O.) 750VA (N.C.) 1,250VA Max. switching current 5A 5A (N.O.) 3A (N.C.) 5A Min. switching load * 10 mA, 5 VDC (VE-HM, H), 100 mA 5 VDC (VE-HME, HE, HM5, H5) Mechanical Min. 10 x 106 operations Electrical (at rating) Min. 100 x 103 operations Standard type Rated power (at 20 C) 360 mW standard type, 250 mW high sensitive type Operate power (at 20 C) 177 mW standard type, 130 mW high sensitive type Operating temperature range Standard: -40 C to +85 C High sensitivity: -40 C to +90 C (no frost) Operate (at nominal voltage) Max. 10 ms (without bounce) Release (at nominal voltage) Max. 5 ms (no diode) Resistance (initial) Dielectric strength Surge strength Other Max. 200mOhm Vibration resistance Shock Min. 50 x 103 operations High sensitive type Min. 1,000MOhm at 500VDC Open contacts 1,000VAC 1min. 750VAC 1min. Contacts to coil 2,000VAC, 1min Coil to contacts Standard: 4,000V / High sensitive: 6,000V, 1.2 x 50s standard wave Misoperation 10 to 55Hz double amplitude 3.3 mm Endurance 10 to 55Hz double amplitude 3.3 mm Misoperation Min. 100m/s (11 1ms) Endurance Min. 500m/s (6 1ms) Weight Approximately 8 g Sealing Plastic sealed RTIII 1,000VAC 1min. 750VAC 1min. * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. 2 VE SERIES FTR-K1 SERIES n COIL RATING Standard type (360 mW) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must ReleaseVoltage (VDC) * 5 5 69 3.5 0.25 6 6 100 4.2 0.3 9 9 225 6.3 0.45 12 12 400 8.4 0.6 18 18 900 12.6 0.9 24 24 1,600 16.8 1.2 48 48 6,400 33.6 2.4 Rated Power (mW) 360 High sensitive type (250 mW) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must ReleaseVoltage (VDC) * 5 5 100 3.6 0.25 6 6 145 4.3 0.3 9 9 325 6.5 0.45 12 12 575 8.6 0.6 18 18 1,300 13 0.9 24 24 2,310 17.3 1.2 48 48 9,220 34.7 2.4 Rated Power (mW) 250 Note: All values in the table are valid for 20C and zero contact current. * Specified operate values are valid for pulse wave voltage. n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) E 56149, E 45026 CSA C22.2 No. 14 LR 35579 VDE 0435 part 201 40017070 VE-( )-H: 5A, 250VA/30VDC (N.O. resistive) 3A, 250VAC (N.C. resistive) 5A, 30VDC (N.C. resistive) 1/14 HP, 250VAC /125VAC VE-( )-HM 5A, 250VAC/30VDC (resistive) 1/12 HP, 250VAC /125VAC VE-( )-H5 5A, 250VAC/30VDC (N.O. resistive) 1/10 HP, 250VAC /125VAC (N.O. resistive) 5A, 250VAC/30VDC (N.C. resistive) 1/14 HP, 250VAC /125VAC (N.C. resistive) VE-( )-HM5 5A, 250VAC/30VDC (resistive) 1/10 HP, 250VAC /125VAC 5A, 250VAC, cos 1 3A, 250VAC, cos 1 3 FTR-K1 SERIES VE SERIES n CHARACTERISTIC DATA / REFERENCE DATA 4 FTR-K1 SERIES VE SERIES n DIMENSIONS 5 FTR-K1 SERIES VE SERIES RoHS Compliance and Lead Free Information 1. General Information l l l l All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including amendments. Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. (Amendment to Directive 2002/95/EC) All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. 2. Recommended Lead Free Solder Profile l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder condition: Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 6 FTR-K1 SERIES VE SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users' own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. July 22, 2010 7