Automation Controls Catalog DS Partly to Be Discontinued: 2 Form C type (Standard, Reverse polarity type) Last time buy:March 31, 2015 Long seller backed by product variety and high reliability DS RELAYS FEATURES Compliance with RoHS Directive 1. Breakthrough height of 9.8 mm .386 inch beats the 10 mm .394 inch limit 1c and 2c all have the same height (9.8 mm .386 inch). The width of the relay is also the same (9.9 mm .390 inch). Since the only size variable is the length, the shared form makes mounting on printed printing wiring boards easy. 2. Suitable for use in difficult environments Epoxy resin seals the parts and cut off the external atmosphere, thus enabling use in difficult environments. 3. Can be used with automatic solder and automatic wash systems Automatic soldering and automatic washing can be carried out once the parts are mounted on PC boards. 4. Gold-clad twin contacts ensure high reliability Highly stable gold cladding on the contacts ensures that contact resistance changes little over time. Furthermore, the use of twin contacts, a configuration that performs with superior contact reliability, ensures extremely low contact failure rates even under low level loads. 5. Polarized magnetic circuits realize resistance to shock and vibration High-performance polarized magnetic circuits that utilize the energy of permanent magnets have made it possible to create relays with strong resistance to shock and vibration. 6. DIL terminal array enables use of IC sockets 7. Widening scope of application with multicontact latching In addition to single side stable types, you can take advantage of the memory of functions of convenient 1 coil or 2 coil latching relays. TYPICAL APPLICATIONS Besides telecommunications, measuring devices, office equipment, computers and related equipment, DS relays are also recommended for a broad range of applications including business devices, audio systems, and industrial equipment. ORDERING INFORMATION DS E Contact arrangement 1: 1 Form C 2: 2 Form C Sensitivity M: 400 mW nominal operating power S: 200 mW nominal operating power Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching Nominal coil voltage DC 1.5, 3, 5, 6, 9, 12, 24, 48 V Nil: Standard polarity type R: Reverse polarity type Note: 1 coil latching type are manufactured by lot upon receipt of order. Reverse polarity types available (add suffix-R) 2014.01 industrial.panasonic.com/ac/e/ -1- (c) Panasonic Corporation 2014 ASCTB17E 201401-T 3DUWO\to Be Discontinued: 2 Form C type (Standard, Reverse polarity type) Last time buy: March 31, 2015 DS TYPES 1. Standard type Contact arrangement Nominal coil voltage 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 1 Form C 2 Form C Single side stable type Part No. DS1E-M-DC1.5V DS1E-M-DC3V DS1E-M-DC5V DS1E-M-DC6V DS1E-M-DC9V DS1E-M-DC12V DS1E-M-DC24V DS1E-M-DC48V DS2E-M-DC3V DS2E-M-DC5V DS2E-M-DC6V DS2E-M-DC9V DS2E-M-DC12V DS2E-M-DC24V DS2E-M-DC48V 2 coil latching type Part No. DS1E-ML2-DC1.5V DS1E-ML2-DC3V DS1E-ML2-DC5V DS1E-ML2-DC6V DS1E-ML2-DC9V DS1E-ML2-DC12V DS1E-ML2-DC24V DS1E-ML2-DC48V DS2E-ML2-DC3V DS2E-ML2-DC5V DS2E-ML2-DC6V DS2E-ML2-DC9V DS2E-ML2-DC12V DS2E-ML2-DC24V DS2E-ML2-DC48V Single side stable type Part No. DS1E-S-DC1.5V DS1E-S-DC3V DS1E-S-DC5V DS1E-S-DC6V DS1E-S-DC9V DS1E-S-DC12V DS1E-S-DC24V DS1E-S-DC48V DS2E-S-DC3V DS2E-S-DC5V DS2E-S-DC6V DS2E-S-DC9V DS2E-S-DC12V DS2E-S-DC24V DS2E-S-DC48V 2 coil latching type Part No. DS1E-SL2-DC1.5V DS1E-SL2-DC3V DS1E-SL2-DC5V DS1E-SL2-DC6V DS1E-SL2-DC9V DS1E-SL2-DC12V DS1E-SL2-DC24V DS1E-SL2-DC48V DS2E-SL2-DC3V DS2E-SL2-DC5V DS2E-SL2-DC6V DS2E-SL2-DC9V DS2E-SL2-DC12V DS2E-SL2-DC24V DS2E-SL2-DC48V Standard packing: Tube: 50 pcs.; Case: 500 pcs. 2. High sensitivity type Contact arrangement Nominal coil voltage 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 1 Form C 2 Form C Standard packing: Tube: 50 pcs.; Case: 500 pcs. Note: Reverse polarity types available (add suffix-R) RATING 1. Coil data 1) Single side stable type Type Standard (M) type High sensitivity (S) type Nominal coil voltage 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Pick-up voltage (at 20C 68F) 70%V or less of nominal voltage (Initial) 1 Form C: 80%V or less of nominal voltage 2 Form C: 70%V or less of nominal voltage (Initial) Drop-out voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 10%V or more of nominal voltage (Initial) 266.7mA 133.3mA 80.0mA 66.7mA 44.4mA 33.3mA 16.7mA 8.3mA 5.63 22.5 62.5 90 203 360 1,440 5,760 133.3mA 11.3 66.7mA 40.0mA 33.3mA 22.2mA 16.7mA 8.3mA 4.2mA 45 125 180 405 720 2,880 11,520 10%V or more of nominal voltage (Initial) Nominal operating power Max. applied voltage (at 50C 122F) 1 Form C: 120%V of nominal voltage 400mW 2 Form C: 150%V of nominal voltage 1 Form C: 160%V of nominal voltage 200mW 2 Form C: 200%V of nominal voltage Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ -2- (c) Panasonic Corporation 2014 ASCTB17E 201401-T 3DUWO\to Be Discontinued: 2 Form C type (Standard, Reverse polarity type) Last time buy: March 31, 2015 DS 2) 2 coil latching type Type Nominal coil voltage Standard (M) type High sensitivity (S) type 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 1.5V DC 3V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Reset voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Set coil Reset coil Coil resistance [10%] (at 20C 68F) Set coil Reset coil 70%V or less of nominal voltage (Initial) 70%V or less of nominal voltage (Initial) 240mA 120mA 72mA 60mA 40mA 30mA 15mA 7.5mA 240mA 120mA 72mA 60mA 40mA 30mA 15mA 7.5mA 6.25 25 69.4 100 225 400 1,600 6,400 6.25 25 69.4 100 225 400 1,600 6,400 1 Form C: 80%V or less of nominal voltage 1 Form C: 80%V or less of nominal voltage 2 Form C: 70%V or less of nominal voltage (Initial) 2 Form C: 70%V or less of nominal voltage (Initial) 120mA 60mA 36mA 30mA 20mA 15mA 7.5mA 3.75mA 120mA 60mA 36mA 30mA 20mA 15mA 7.5mA 3.75mA 12.5 50 139 200 450 800 3,200 12,800 12.5 50 139 200 450 800 3,200 12,800 Set voltage (at 20C 68F) Nominal operating power Set coil Max. applied voltage (at 50C 122F) Reset coil 1 Form C: 120%V of nominal voltage 360mW 360mW 2 Form C: 150%V of nominal voltage 1 Form C: 160%V of nominal voltage 180mW 180mW 2 Form C: 200%V of nominal voltage 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. carrying current Min. switching capacity (Reference value)*1 Specifications 1 Form C 2 Form C Max. 50 m (By voltage drop 6 V DC 1A) Ag+Au clad 2 A 30 V DC (resistive load) 60 W, 125 VA (resistive load) 220 V DC, 250 V AC 3A 10A 10m V DC Single side stable (M type: 400 mW, S type: 200 mW); latching (M type: 360 mW, S type: 180 mW) Nominal operating power Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Between open contacts Between contact and coil Temperature rise Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Functional*2 Destructive Functional Vibration resistance Destructive Mechanical Electrical Shock resistance Mechanical characteristics Expected life Conditions Conditions for operation, transport and storage*3 Max. operating speed (at rated load) Unit weight Min. 100M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. 1,000 Vrms for 1min. (500 Vrms for 1min: 1 Form C high sensitivity type) (Detection current: 10mA.) 1,500 Vrms for 1min. (1,000 Vrms for 1min: 1 Form C high sensitivity type) (Detection current: 10mA.) Max. 65C (By resistive method, nominal coil voltage applied to the coil, contact carrying current: 2A.) Max. 10 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 5 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 490 m/s2 Min. 490 m/s2 Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 5 mm Min. 108 (107: 1 Form C latching type) (at 600 cpm) Min. 5x105 rated load (at 60 cpm) Ambient temperature: -40C to +70C -40F to +158F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 60 cpm Approx. 3 g .11 oz Approx. 4g .14oz Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (TX/TX-S/TX-D relay AgPd contact type are available for low level load switching [10V DC, 10mA max. level]) *2 Half-wave pulse of sine wave: 11ms; detection time: 10s *3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ -3- (c) Panasonic Corporation 2014 ASCTB17E 201401-T 3DUWO\to Be Discontinued: 2 Form C type (Standard, Reverse polarity type) Last time buy: March 31, 2015 DS REFERENCE DATA 1. Maximum switching capacity 2. Life curve (Resistive load) 3. Contact reliability for AC loads 1,000 5.0 125 V AC 2.0 1.0 0.5 Weibull probability data 0.2 0.1 10mV 10A 0 100mA 1A Switching current 1 2 Switching current, A 250 VA C 0.5A 125V AC 10.0 0.3A 100 10 10V 70.0 50.0 30.0 30 V DC 1A 250 125V VA A C C 100V 99.9 99.0 95.0 0.5 A No. of operations, x104 1,000V Contact voltage, DC F(t), % Tested sample: DS2E-M-DC24V 10 pcs. Operating speed: 20 cpm. Detection level: 200 m 0 10 100 No. of operations, x104 1,000 4-(1). Coil termperature rise (2 Form C single side stable type) 4-(2). Coil temperature rise (2 Form C 2 coil latching type) 5. Operate and release time characteristics (2 Form C single side stable type) Tested sample: DS2E-M-DC12V Point measured: Inside the coil Ambient temperature: 18 to 19C 64 to 66F Tested sample: DS2E-ML2-DC12V Point measured: Inside the coil Ambient temperature: 20 to 21C 68 to 70F Test condition: Without diode connected to coil in parallel Temperature rise, C 0A 40 30 0A 30 20 10 10 10 Pick-up voltage (1) (2) (3) OFF OFF ON ON -10 0 Drop-out voltage OFF ON Reset coil Set coil 100 3 Operate time (mean) 2 Release time (mean) 1 0 110 Coil applied voltage, %V 80 100 120 Coil applied voltage, % 6-(2). Influence of adjacent mounting (2 Form C) 0 10 0 110 Coil applied voltage, %V OFF ON -10 5 10 .197 .394 Inter-relay distance , mm inch Rate of change, % 100 6-(1). Influence of adjacent mounting (1 Form C) Rate of change, % 2A 40 20 0 Rate of change, % 50 Operate and release time, ms 3A 2A 50 4 60 3A Rate of change, % Temperature rise, C 60 10 Pick-up voltage (1) (2) (3) OFF OFF ON ON OFF OFF ON ON 0 -10 10 Drop-out voltage 0 -10 5 10 .197 .394 Inter-relay distance , mm inch Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ -4- (c) Panasonic Corporation 2014 ASCTB17E 201401-T 3DUWO\to Be Discontinued: 2 Form C type (Standard, Reverse polarity type) Last time buy: March 31, 2015 DIMENSIONS (mm inch) DS The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac DS (1 Form C) Single side stable, 2 coil latching External dimensions CAD Data 15 .590 PC board pattern (Bottom view) Single side stable 2.54 .100 9.9 .390 2 coil latching 2.54 .100 5-0.9 dia. 5-.035 dia. 2.54 .100 9.3 9.9 .366 .390 6-0.9 dia. 6-.035 dia. 2.54 .100 0.6 .024 7.62 .300 7.62 .300 3.4 .134 5.08 .200 7.62 .300 0.6 .024 5.6 .221 7.62 .300 0.3 .012 5.08 .200 7.62 .300 5.08 .200 7.62 .300 Schematic (Bottom view) General tolerance: 0.3 .012 Single side stable 1 12 10 2 coil latching 6 1 3 6 7 12 10 7 (Deenergized condition) (Reset condition) Tolerance: 0.1 .004 Note: External dimensions of 1 coil latching types are same as single side stable type. DS (2 Form C) Single side stable External dimensions CAD Data 20 .780 PC board pattern (Bottom view) 9.9 .390 2.54 .100 8-0.9 dia. 8-.035 dia. 2.54 .100 9.3 9.9 .366 .390 0.6 .024 7.62 .300 3.4 .134 5.08 .200 5.08 .200 7.62 .300 0.6 .024 5.6 .221 7.62 .300 0.3 .012 5.08 .200 5.08 .200 7.62 .300 Schematic (Bottom view) General tolerance: 0.3 .012 9 11 13 16 8 6 4 1 (Deenergized condition) Tolerance: 0.1 .004 Note: External dimensions of 1 coil latching types are same as single side stable type. DS (2 Form C) 2 coil latching External dimensions CAD Data 20 .780 PC board pattern (Bottom view) 9.9 .390 2.54 .100 10-0.9 dia. 10-.035 dia. 2.54 .100 9.3 9.9 .366 .390 0.6 .024 7.62 .300 3.4 .134 5.08 .200 5.08 .200 5.08 .200 2.54 .100 0.6 .024 5.6 .221 7.62 .300 0.3 .012 5.08 .200 5.08 .200 5.08 .200 2.54 .100 Schematic (Bottom view) General tolerance: 0.3 .012 9 11 13 15 16 8 6 4 2 1 (Reset condition) Tolerance: 0.1 .004 Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ -5- (c) Panasonic Corporation 2014 ASCTB17E 201401-T 3DUWO\to Be Discontinued: 2 Form C type (Standard, Reverse polarity type) Last time buy: March 31, 2015 DS NOTES 1. Coil connection When connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction. For general cautions for use, please refer to the "Cautions for use of Signal Relays" or "General Application Guidelines". Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/ -6- (c) Panasonic Corporation 2014 ASCTB17E 201401-T