HECR SERIES
Avionicap ®
Avionicap ®Series Minature Metallized Polycarbonate - Hermetically
Sealed
The Avionicap ®HECR type capacitor is a hermetically sealed version of our
Avionicap ®ECR type series, which has gained broad acceptance in the
electronic industry. It is hermetically sealed in ceramic case with metal end caps
so it oers excellent environmental protection.
FEATURES STANDARD CONFIGURATION
-For Hostile environments
where pcb density and
system miniaturization are
required.
-Eective replacement for
conventional tubular axial
leaded capacitors
-#22 AWG tinned copper clad steel
terminals
Rev. 2
 Specication Summary
Capacitance Range
0.001µF to 1.0µF Capacitance is measured at 25°C and at, or
referred to, a frequency of 1KHz.
Capacitance Tolerance
K=±10%, J=±5%, G=±2%, F=±1%
Operating Temperature Range
-55ºC to 125ºC
Enclosure/ Construction
Hermetically sealed ceramic case with tinned metal end caps.
Voltage Rating
DC working voltage ratings at +85ºC, 30VDC, 50VDC,
100VDC, 150VDC, 200VDC and 300VDC. Voltage derating of
1.25% per degree C is necessary to +125°C.
Quality Control
Capacitors are tested 100% for:
o Capacitance
o Tolerance
o Dissipation Factor
o Dielectric withstanding Voltage
o Insulation Resistance
o Seal Per Method 112 of MIL-STD-202 HECR - test condition A
M39022/11 - also tested to condition C, procedure IIIa.
Process and inspection data are maintained on le and available
on special request.
Environmental
Parameter Method Condition
Vibration 204 D
Immersion 104 C
Shock 213 I
Humidity 106 -
Thermal Shock 107 B
Life 108 F
Reference MIL-STD-202
 Characteristics
Insulation Resistance
Temperature(°C) 25 85 125 
Megaohmsx
Microfarads
100,000 7,000 700
Insulation Resistance
Dielectric Strength
Capacitors will withstand a DC potential of 200% rated
voltage for two (2) minutes without damage or
breakdown.
Test voltage is applied and discharged through a
resistance of 1 OHM per volt minimum, and at 25°C.
Capacitance Change
Temperature(°C) -55 25 85 125
PercentageChange
(typical)
-2.5 0 ±1.0 ±2.0
CapacitanceChange
Dissipation Factor
When measured at 1KHz, the dissipation factor will not exceed
0.2% form +25° to 125°C
Rev. 2
Electrical Data
CASE NUMBER
VALUE
IN MFD
VDC VALUE
IN MFD
VDC VALUE
IN MFD
VDC
30 50 100 150 200 300 30 50 100 150 200 300 30 50 100 150 200 300
0.0010 - - - - - 1 0.010 - 1 2 - - 3 0.10 - 3 5 6 - -
0.0012 - - - - - 1 0.012 - 1 2 - 3 4 0.12 - 3 5 - - -
0.0015 - - - - - 1 0.015 - 1 2 - 3 4 0.15 - 3 6 - - -
0.0018 - - - - - 1 0.018 - 1 - - 3 5 0.18 3 4 6 - - -
0.0022 - - - - 1 2 0.022 - 1 - 3 4 5 0.22 3 4 6 - - -
0.0027 - - - - 1 2 0.027 - 1 - 3 4 5 0.27 3 4 - - - -
0.0033 - - - 1 2 3 0.033 1 2 3 4 5 6 0.33 4 5 - - - -
0.0039 - - - 1 2 3 0.039 1 2 3 4 5 6 0.39 4 5 - - - -
0.0047 - - - 1 2 3 0.047 1 2 3 - 5 - 0.47 5 6 - - - -
0.0056 - - 1 2 - 3 0.056 2 0 3 5 6 - 0.56 5 6 - - - -
0.0068 - - 1 2 - 3 0.068 2 3 4 5 6 - 0.68 5 6 - - - -
0.0082 - - 1 - - 3 0.082 2 3 4 6 - - 0.82 6 - - - - -
-- - - - - - -- - - - - - 1.00 6 - - - - -
CASE DIMENSIONS
CASE NO.
T  H L LS 
+0.030 + 0.030 + 0.030 ±0.015
- 0.010 - 0.010 - 0.020
10.110 0.210 0.240 0.200
20.170 0.270 0.240 0.200
30.170 0.270 0.340 0.300
40.190 0.380 0.340 0.300
50.190 0.380 0.450 0.400
60.220 0.500 0.450 0.400
Note: When specifying insulatedcase capacitors,add0.025" to theT andL dimensions,and 0.040" to theH dimension.
Rev. 2
Mechanical Data
Rev. 2
ADDITIONAL INFORMATION
Because of it's sub miniature size, care must be taken to assure that the body temperature of the HECR
capacitor does not exceed 125°C during installation, so as not to adversely performance.
How To Order
TYPE
Metallized Polycarbonate - Hermetically Sealed HECR
102
CAPACITANCE IN PICOFARADS
The rst digits are signicant, the third digit represents the number of zeros to
follow to express capacitance in picofarads.
A
TOLERANCE
K=±10% J=±5% G=±2% F=±1% K
Sales
United States Europe
Eastern:
*Headquarters*
P.O. Box 1278
Eatontown,NJ 07724
Tel: 732-542-7880
Fax: 732-542-0524
Central:
Illinois 630-668-8747
email: sales@ecicaps.com
website:www.ecicaps.com
Ireland
Electronic ConceptsEurope LTD
IDA Estate, Oughterad
Co. Galway, Ireland
tel: +353-91-552385,552432
fax: +353-91-552387
email: sales@ecicaps.ie
website:www.electronicconcepts.ie
Rev. 2
Marking And Date Code
All capacitors are marked with company initials "EC", corporate logo or EC trademark—in addition to type HECR, capacitance,
tolerance, rated DC working voltage and date code. The two digits of the date code represent the year, the second two digits the
week, i.e., 0952 is the 52nd week of 2009, 0902 is the second week of 2009. NOTE: Those supplied to MIL-C-39022/11 are marked
in accordance with the military
Quality Assurance
Major emphasis is placed on quality assurance. EC is an ISO 9001-2000 and AS9100:2004 Company. Raw material
inspection and the use of SPC manufacturing procedures assure the highest quality standards. Procedures are fully described in the
EC Quality Control Manual. Electronic Concepts will continue to advance the state-of-the-art by utilizing leading edge technology,
compact capacitor designs and establishing reliability procedures.
STYLE / VOLTAGE
A=30VDC, B=50VDC, D=100VDC, E=150VDC, F=200VDC, H=300VDC