NOTES: UNLESS OTHERWISE SPECIFIED 1. [>exees w 10. 11. 12. 13. 14. 15. THIS COMPONENT CONFORMS TO UL60950. UL FILE NO. IS: 216117. THIS COMPONENT IS RECOGNIZED BY ONE OR [={mmmu MORE SAFETY AGENCIES SUCH AS UL, VDE, * noes CSA AND/OR TUV. ALL ENGINEERING CHANGES MUST HAVE PRIOR APPROVAL BY THE DESIGN CENTER QUALITY DEPARTMENT FOR SAFETY AGENCY COMPLIANCE. WARNING: LOWER PORT T+ 3 cT 7 . TD- 6 NOTICE: | THIS IS A RoHS COMPLIANT COMPONENT/PRODUCT. ALL ENGINEERING CHANGES MUST HAVE PRIOR APPROVAL P cB BY THE DESIGN CENTER. RD+ 1 cr 4 fp RD- 2 : < RECEIVE] < > 1CT:1 TRANSMIT RoHS PLASTIC HOUSING: THERMOPLASTIC MATERIAL WITH FLAMMABILITY RATING UL 94VO OR BETTER. CONTACT BASE MATERIAL: PHOSPHOR BRONZE. CONTACTS UNDERPLATE: 30-50 MICROINCHES DUCTILE NICKEL. CONTACTS PMATING: 30 MICROINCH GOLD PLATING. SOLDER TAIL PLATING MATERIAL: 200-500 uINCHES 100% TIN, MATTE FINISH. METAL SHIELD: NICKEL PLATING ON COPPER ALLOY. JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS PART 68 SUBPART F. $s 75S 75 i _ i Pulse A TECHNITROL COMPANY www.pulseeng.com UPPER PORT 3 X+ T+ 3 CABLE CT 7 6 TX TRANSMIT CABLE PCB 1 RX+ RD+ 1 cT 4 2 RX- RD- 2 3 X+ 1CT:1 RECENVE 75 AAA WA 4 5 7 8 ct CHS GND BO-] WA PCB PLATING: HASL (TOP PCB ) | s ENIG (BOTTOM PCB) CHS GND aa SOLDERABILITY: CONFORMS TO ANSI/JSTD002, IPC/EIA J-STDO03A. +o GREEN Mf OPERATING TEMPERATURE: 0C TO +70C STORAGE TEMPERATURE: -20C TO +125'C 2 oSOMMON JEDEC MOISTURE: LEVEL 1. 5 oYeuow | <A DIMENSIONS ARE IN INCHES [MILLIMETERS] WITH THE FOLLOWING TOLERANCES: [MILLIMETERS] ARE FOR REFERENCE ONLY. XX= +.02 [40.5] (XXX= +.010 [40.25] GREEN 2 COMMON YELLOW SCHEMATIC 4 ~ ELECTRICAL CHARACTERISTICS AT +25C UNLESS OTHERWISE SPECIFIED (FOR REFERENCE ONLY. USED FOR CUSTOMER INFORMATION.) PARAMETER SPECIFICATIONS OPERATING TEMP oc 70C TURNS RATIO 1:1 2% POLARITY PER SCHEMATIC 100 KHz 100 MHz INSERTION LOSS 1.2 dB MAX 1.0 dB MAX RETURN LOSS 1 MHz 30 MHz 60 MHz 80 MHz (Z OUT = 100 OHM +15%)| 22 dB MIN/-18 dB MIN |-12 dB MIN|10 dB MIN INDUCTANCE (OCL) MEASURED AT 100 KHz, 100 mVRM (MEDIA SIDE, oc7orc) | 72 YH MIN (AND with 8 mA DC BIAS 5) CROSSTALK, ADJACENT 1-62 MHz 100 MHz CHANNELS -35 dB MIN -30 dB MIN COMMON MODE 1-10 MHz | 50-100 MHz 150 MHz REJECTION RATIO 35 dB -20 dB -15 dB DC RESISTANCE, 1/2 WINDING 0.65 OHM MAX INPUT OUTPUT ISOLATION 2250 VDC MIN @ 60 SECONDS NOTE: f IS FREQUENCY IN MHz. LED ELECTRICAL SPECIFICATIONS EMMITTED COLOR GREEN YELLOW WAVE LENGTH (if = 20 mA) 570 nm 590 nm BRIGHTNESS MIN TO MAX (med) |5 TO 12 3.5 TO 8&5 If (mA) 20 20 VIEWING ANGLE 120 120 POWER DISSIPATION (Pd) 85 mW MAXIMUM 85 mW MAXIMUM FORWARD CURRENT (0.1 mS PULSE) 160 mA MAXIMUM 160 mA MAXIMUM FORWARD VOLTAGE (Vf) (If = 20 mA)}2.8 V MAXIMUM |2.8 V MAXIMUM NOTE: PER VENDORS SPECIFICATION @ Copyright, 2010. Pulse Engineering, Inc. All rights reserved. Drawing specifications subject to change without notice. (11/19/10) PULSE CONFIDENTIAL PRODUCT DESCRIPTION PS DRAWING SHEET: | DWG. NO./ PART NO. REV. PROPRIETARY CONN,RJ45,2X4,100D,1:1,TY PS2415.252-A 1 J200114NL M14eVQuaen Pulse A TECHNITROL COMPANY www. pulseeng.com [3X 13.97 (=41.91)] (.550) [(13.97)] PIN 1 LOWER YELLOW LED PIN 3 COMMON LED PIN 2 GREEN LED PIN 1 12332112352 1123321123352 1 PIN 1 UPPER LED, LED, LOWER PORT GREEN/YELLOW | - 1.030 +.005 [26.20 +0.13] .085 +.005 (2.16 +0.13] LIHAT O DO O us Pulse J ck. 1] S oO eae RECOMMENDED MIE CODE CIRY OF MFG PANEL CUT OUT Jt Hh L - aI 1 [0.63] 2.385 +.005 H- 4.015 4.005. TO TOP (2.47) [(63)] 0 [O25) M AX [60.58 +0.13] [0.38 0.13] OF PCB | 2.340 MAX [59.44 MAX] SEE CROSSBAR =| 1.235 MAX [31.40 MAX] j le, 3X 550 (=1.650) GREEN/YELLOW (.171) [(4.35)] 005 MIN [0.13 MIN] PPER PORT .150 [3.81] } (SHIELD TAB) L125 [3.17] .120 [3.05] LL 430 [10.92] (POST) (SIGNAL AND LED PINS) @ Copyright, 2010. Pulse Engineering, Inc. All rights reserved. Drawing specifications subject to change without notice. (11/19/10) PULSE CON FIDENTIAL PROPRIETARY PRODUCT DESCRIPTION PS DRAWING SHEET: | DWG. NO./ PART NO. REV. CONN,RJ45,2X4,100D,1:1, TY PS2415.252-A 2 J200114NL M14(.550) [(13.97)] + 400 [10.16] +} 100 [2.54] .050 [1.27] 3X .550 (=1.650 3X 13.97 (1759), | | 4X 4.062 [#1.57] \a j .550 [13.97] j .480 [12.19] | .380 [9.65] e .280 [7.11] } .200 [5.08] l 100 [2.54] L .065 [1.65] Wh Pulse A TECHNITROL COMPANY www.pulseeng.com 24X 4.045 +.003 [91.143 +0.0762] 64X 4.036 +.003 [40.9144 +0.0762] eeepeee tee $h-$-$--6-$o-6 oe +64+e 4+464H 44 O4+ /e |- o-oo HE HH | 1.230 { { MD a IN yi) @| ---- L lL NO TRACE. ZONE | - 450 [11.43] .727 [18.47] 4 _| 2, x 10 2x 9.128 7-008 L 100 [2.54] .610 [15.49]- [+3.25 +0.08 .250 [6.35] 180 [4.57] L 160 [4.06] 430 [10.92] 2.100 [53.34] _> L 100 [2.54] [31.24] |e 2.100 [53.34] _| | __. 2.400 [60.96] _ > 7 ! 535 [13.59] SUGGESTED PC BOARD LAYOUT VIEWED FROM COMPONENT SIDE UNLESS OTHERWISE SPECIFIED DIMENSIONAL TOLERANCE IS +.002 NO ma ZONE @ Copyright, 2010. Pulse Engineering, Inc. All rights reserved. Drawing specifications subject to change without notice. (11/19/10) PULSE CON FIDENTIAL PROPRIETARY PRODUCT DESCRIPTION PS DRAWING SHEET: DWG. NO./ PART NO. REV. CONN,RJ45,2X4,100D,1:1,TY PS2415.252A 3 J200114NL M14