May 2017
DocID029995 Rev 3
1/12
This is information on a product in full production.
www.st.com
ESDA6V1-5SC6Y
Automotive-grade 5-line transient voltage suppressor (TVS)
for ESD protection
Datasheet - production data
Features
AEC-Q101 qualified
5 unidirectional TVS functions
UL 94 V-0
J-STD-020 MSL level 1
Benefits
Suitable for high density boards
Complies with the following
standards
ISO 10605 / IEC 61000-4-2: C = 150 pF,
R = 330 Ω
30 kV (air discharge)
18 kV (contact discharge)
ISO 10605: C = 330 pF, R = 330 Ω
20 kV (air discharge)
13 kV (contact discharge)
ISO 7637-3
Pulse 3a: VS = -150 V
Pulse 3b: VS = +100 V
Applications
This device is used to protect equipment in which
ESD and EOS transient overvoltage may
damage electronic circuits.
Description
This device is a monolithic voltage suppressor
designed to protect components connected to
data and transmission lines against ESD.
It clamps the voltage just above the logic level
supply for positive transients, and to a diode drop
below ground for negative transients.
Figure 1: Pin configuration
SOT23-6L
Characteristics
ESDA6V1-5SC6Y
2/12
DocID029995 Rev 3
1 Characteristics
Table 1: Absolute ratings (Tamb = 25 °C)
Symbol
Parameter
Value
Unit
Vpp
Peak pulse voltage
ISO 10605 / IEC 61000-4-2
(C = 150 pF, R = 330 Ω)
Contact discharge
Air discharge
30
18
kV
ISO10605 (C = 330 pF, R = 330 Ω)
Contact discharge
Air discharge
20
13
Ipp
Peak pulse current
8/20μs
7
A
Ppp
Peak pulse power
80
W
Tstg
Storage temperature range
-65 to +150
°C
Tj
Operating junction temperature range
-40 to +150
TL
Maximum temperature for soldering during 10 s
260
°C
Figure 2: Electrical characteristics (definitions)
Table 2: Electrical characteristics - values (Tamb = 25 °C)
Order code
VBR at IR
IRM at VRM
VCL at Ipp(1)
VF at IF
αT(2)
Cline
Min.
Max.
Max.
Max.
Max.
Max.
Typ.
V
V
mA
µA
V
V
A
V
mA
10-4/C
pF
ESDA6V1-5SC6Y
6.1
7.2
1
1
5.2
11.4
7
1.25
200
6
50
Notes:
(1)8/20 μs waveform
(2)VBR at Tj = VBR at 25 °C x (1 + αT x (Tj - 25 ))
ESDA6V1-5SC6Y
Characteristics
DocID029995 Rev 3
3/12
0
10
20
30
40
50
60
70
80
90
100
110 IPP%
t (µs)
tr= rise time
tp = pulse duration time
tp
tr
Figure 3: Pulse definition for electrical characteristics
Characteristics
ESDA6V1-5SC6Y
4/12
DocID029995 Rev 3
1.1 Characteristics (curves)
Figure 4: Pulse power versus junction temperature
Figure 5: Peak pulse power versus exponential
pulse duration
Figure 6: Clamping voltage versus peak pulse
current
Figure 7: Leakage current versus junction
temperature
Figure 8: ESD response to IEC 61000-4-2
(+8 kV contact discharge)
Figure 9: ESD response to IEC 61000-4-2
(-8 kV contact discharge)
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125 150 175
Tj(°C)
8/20 µs
Ppp(W)
10
100
1000
10 100 1000
tp(µs)
PPP(W)
0.1
1
10
6 7 8 9 10 11 12
VCL(V)
8/20 µs
IPP(A)
10
100
1000
25 50 75 100 125 150
Tj(°C)
VRM = 5.2 V
IR(nA)
79.8 V
11.8 V 10.4 V 7.1 V
-2.1 V
-4.6 V
-82.6 V
-710 mV
ESDA6V1-5SC6Y
Characteristics
DocID029995 Rev 3
5/12
1 V/div
0.5 A/div
50 ns/div
50 ns/div
0.5 A/div
2 V/div
Figure 10: ISO7637-3 pulse 3a response (VS = -150 V)
Figure 11: ISO7637-3 pulse 3b response (VS = 100 V)
Application and design guidelines
ESDA6V1-5SC6Y
6/12
DocID029995 Rev 3
2 Application and design guidelines
Further information can be found in AN2689 titled: “Protection of automotive electronics
from electrical hazards, guidelines for design and component selection”.
ESDA6V1-5SC6Y
Package information
DocID029995 Rev 3
7/12
3 Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Epoxy meets UL 94,V0
Lead-free package
3.1 SOT23-6L package information
Figure 12: SOT23-6L package outline
Table 3: SOT23-6L package mechanical data
Ref.
Dimensions
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
0.9
1.45
0.0354
0.0571
A1
0
0.15
0
0.0059
A2
0.9
1.3
0.0354
0.0512
b
0.30
0.5
0.0118
0.0197
c
0.09
0.2
0.0035
0.0079
D
2.8
3.05
0.1102
0.1201
E
1.5
1.75
0.0591
0.0689
e
0.95
0.0374
H
2.6
3
0.1024
0.1181
L
0.3
0.6
0.0118
0.0236
θ
0
10
0
0.3937
Package information
ESDA6V1-5SC6Y
8/12
DocID029995 Rev 3
Figure 13: Footprint recommendations,
dimensions in mm (inches)
Figure 14: Marking layout (refer to ordering
information table for marking)
Figure 15: Package orientation in reel
Figure 16: Tape and reel orientation
Figure 17: Reel dimensions (mm)
Figure 18: Inner box dimensions (mm)
ESDA6V1-5SC6Y
Package information
DocID029995 Rev 3
9/12
Figure 19: Tape and reel outline
Table 4: Tape and reel mechanical data
Ref.
Dimensions
Millimeters
Min.
Typ.
Max.
P1
3.9
4
4.1
P0
3.9
4
4.1
D0
1.45
1.5
1.6
D1
1
F
3.45
3.5
3.55
K0
1.3
1.4
1.6
P2
1.95
2
2.05
W
7.9
8
8.3
Ordering information
ESDA6V1-5SC6Y
10/12
DocID029995 Rev 3
4 Ordering information
Figure 20: Ordering information scheme
Table 5: Ordering information
Order code
Marking
Package
Weight
Base qty.
Delivery mode
ESDA6V1-5SC6Y
EC6Y
SOT23-6L
14 mg
3000
Tape and reel
ESDA xx - 5 SC6 Y
ESD array
Breakdown voltage
Numbers of lines protected
Package
SC6 = SOT23-6L
Automotive grade
ESDA6V1-5SC6Y
Revision history
DocID029995 Rev 3
11/12
5 Revision history
Table 6: Document revision history
Date
Revision
Changes
08-Nov-2016
1
Initial release.
15-Mar-2017
2
Updated title and description in cover page.
Minor text changes to improve readability.
03-May-2017
3
Formatting improvement, no content changes.
ESDA6V1-5SC6Y
12/12
DocID029995 Rev 3
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications , and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics – All rights reserved