343
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3MMolded Assembly
2mm×2mm 2MSeries
TS-1056-04
Sheet 1 of 2
SAvailable in multiple sizes
SSockets mate with standard 2 mm ×2 mm headers
and plugs
SMolded-in strain relief
Date Modified:June 21, 2002
Physical
Connector
Technical Specification: TS-0525 for 2 mm ×2 mm Molded-On Socket
TS-0524 for 2 mm ×2 mm Molded-On PCB
Cable
Technical Specification: TS-0452 for 1mm Flat Ribbon Cable
Electrical
Voltage Rating: 30V
Environmental
Temperature Rating: -- 2 0 °C to +105°C
UL File No.: E86982
344
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3MMolded Assembly
2mm×2mm 2MSeries
Length (Dim A) Tolerance
Min Max Tol
1.6 10.0 ±0.3
10.0 20.0 ±0.5
20.0 40.0 ±0.6
40.0 120.0 ±1.0
120.0 ±2.0
Available Options
Connector/Pos. 6 8 10 12 16 20 22 24 26 30 36 40 44 50
Socket XXX XXXXXX XXX
PCB XXXXXX XXXXXX
Cable XXXXXXXXXXXXXX
Cable / Pos. 6 8 10 12 16 20 22 24 26 30 36 40 44 50
Note: If “Keying” is required, mark the circuit(s) to key.
1 Left Connector (Odd Row) 49
2(EvenRow)50
<Red Cable Stripe
1 Right Connector (Odd Row) 49
2(Even Row) 50
Ordering Information
TS-1056-03
Sheet 2 of 2
Red Stripe
Conductor #1
(near side)
Right
Connector
Left
Connector
B
D
C
A
Connector Types
(Left and Right)
Socket, Low Profile (.29″)
AA = no Centerbump, no Latching Ear
AB = Centerbump, no Latching Ear
AC = no Centerbump, with Latching Ear
AD = Centerbump, with Latching Ear
PCB, 2-Row
BC = SnPb Plating, Straight Solder Tail
Number of
Cable Conductors
Cable Product Series
28 AWG
3625 =
Stranded, PVC
Assembly
Length
Tip-to-Tip
inches
(Dim A in inches)
Example:
001.6 = 1.6″Min
Connector Feature Options
0 = No Keying Required
4 = Keying Required, specifiy
position(s)
Connector Orientation
Options
(Left and Right)
AB = Up-Up
AD = Up-Down
CB = Down-Up
CD = Down-Down
Centerbump Orientation
Options
0 = None
1=Inside
2=Outside
2M XX XX - XXX - XXXX - XXX.X - XX - XX - XX - X
Marking
0=NoMarking
1 = Label - Date Code
2 = Inkstamp - Date
Code
Right
Left Right
Note: A fan-out assembly, with multiple connectors on one end, requires a drawing submittal and review.
Left
A
© 3M 2003
3
Electronic and Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/eisd
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 1 year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any loss or damage arising from
this 3M product, whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted.
