VG 95218 T020 A Issue 4 30th April 2019 Specification Control Drawing Page 1 of 2 Page 2 is for internal use only WIRE, ELECTRICAL, RADIATION CROSSLINKED, MODIFIED FLUOROPOLYMER INSULATED, TIN COATED COPPER, 150C, 600 VOLT, LIGHTWEIGHT The complete requirements for procuring the wire described herein shall consist of this document. Primary Insulation Radiation-Crosslinked Extruded Polyalkene Conductor - Jacket - Tin Plated Copper Radiation - Crosslinked Modified PVF2 Thickness Size A 016 & A 017:- 0.0762 0.0254 mm Size A 001 to A 005:- 0.0762 0.0254 mm Size A 006 to A 008:- 0.0762 Minimum Size A 009 to A 012:- 0.127 0.0254 mm C6 C7 C8 C9 Part Nominal Description Cross Stranding Diameter Sectional No./Diam. (mm) Area (mm) 0.25 C16 C17 C18 C20 FINISHED WIRE CONDUCTOR (mm) VG 95218 T020 A016 C11 Maximum Diameter (mm) Resistance Lower @ 20C Spec Target Nato Maximum Stock Upper Weight Number Spec (kg/km) 6145- Min. Max. (Ohms/km) Limit Limit 19/.127 0.58 0.61 86.00 1.003 1.016 1.041 2.99 165-2230 12- VG 95218 T020 A001 0.40 19/.16 0.74 0.76 53.10 1.168 1.194 1.219 4.40 164-8663 VG 95218 T020 A002 0.50 37/.127 0.83 0.86 42.30 1.270 1.295 1.320 5.47 306-2456 VG 95218 T020 A003 0.60 37/.14 0.93 0.96 33.50 1.372 1.397 1.422 6.60 181-1850 VG 95218 T020 A004 0.75 37/.16 1.03 1.08 26.60 1.499 1.524 1.549 8.25 187-8108 VG 95218 T020 A005 1.00 37/.18 1.18 1.23 21.00 1.651 1.676 1.702 10.29 187-6676 VG 95218 T020 A006 1.20 37/.20 1.34 1.37 16.40 1.829 1.854 1.880 12.84 187-6677 VG 95218 T020 A007 1.50 37/.23 1.49 1.53 13.50 2.032 2.057 2.083 15.85 187-8109 VG 95218 T020 A008 2.50 37/.287 1.85 1.89 8.20 2.489 2.540 2.591 24.08 187-8110 VG 95218 T020 A017 3.00 37/.32 2.13 2.16 6.63 2.692 2.743 2.794 30.09 185-3573 VG 95218 T020 A009 4.00 7X33X.16# 2.65 3.00 5.09 4.520 4.595 4.670 58.00 199-4671 VG 95218 T020 A010 6.00 7X27X.21# 3.35 3.80 3.39 5.000 5.150 5.500 79.00 307-4348 VG 95218 T020 A011 10.00 19X17X.21# 4.30 4.80 1.95 6.071 6.147 6.223 124.00 188-2429 VG 95218 T020 A012 16.00 19X27X.21# 5.20 5.80 1.24 7.010 7.061 7.112 188.00 307-4349 # Indicates conductor stranding diameter shall be Maximum, otherwise shall be nominal COLOUR CODE: All above products shall be white except where coloured components are defined within the issue in effect of VG95218 cable constructions that use Type 20 components. Coloured VG 95218 T020A components are strictly for VG released cable constructions only. NOTE: Nato Stock Numbers (NSN) apply to white wire only. PERFORMANCE REQUIREMENTS : Shall be tested to the issue in effect of WSD 955 Shall meet the requirements of the issue in effect of VG 95218 Part 20 Specification for for Type A cables. APPROVAL: Electronic approval - no signatures will appear. Tyco Electronics UK Ltd. Faraday Road Dorcan SWINDON SN3 5HH Tel: +44 (0)1793 528171 Fax: +44 (0)1793 572516 TE Connectivity is a trading name of Tyco Electronics UK Ltd, Which is registered in England and Wales, number 550926. Registered office: Faraday Road, Dorcan, Swindon, SN3 5HH Website : www.te.com This drawing and the information set forth hereon are the property of Tyco Electronics UK Ltd, and are to be held in trust and confidence. Publication, duplication, disclosure or use for any purpose not expressly authorised in writing by Tyco Electronics UK Ltd is prohibited. This specification sheet takes precedence over documents referenced herein. As Tyco Electronics UK Ltd. reserve the right to make changes in construction without notice please contact Tyco Electronics UK Ltd to ensure that this document is the latest issue. (c)2019 Tyco Electronics UK Ltd, a TE Connectivity Ltd. company. All Rights Reserved.