MOS FET Relays G3VM-21LR1 World's Smallest SSOP Package MOS FET Relay* with Low Output Capacitance and ON Resistance (CxR = 4pF* ) in a 20-V Load Voltage Model * ON resistance of 0.8 (typical) suppresses output signal attenuation. * RoHS Compliant. *Information correct as of May, 2007, according to data obtained by OMRON. Application Examples * Semiconductor inspection tools * Measurement devices and Data loggers * Broadband systems Note: The actual product is marked differently from the image shown here. List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) Model 20 VAC Number per tape G3VM-21LR1 --- G3VM-21LR1(TR) 1,500 G3VM-21LR1(TR05) 500 G3VM-21LR1(TR10) 1,000 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21LR1 4.2 211 228 1.7 1.4 dia. 3.5 0.15 Note: The actual product is marked differently from the image shown here. 0.3 1.27 0.2 1.8 Note: A tolerance of 0.1 mm applies to all dimensions unless otherwise specified. 3.8 2.04 0.460.2 Weight: 0.03 g Terminal Arrangement/Internal Connections (Top View) G3VM-21LR1 4 3 1 2 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21LR1 0.95 3.73 0.8 1.27 MOS FET Relays G3VM-21LR1 235 Absolute Maximum Ratings (Ta = 25C) Item Input Symbol Rating Unit Measurement conditions LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 s pulses, 100 pps LED forward current reduction rate IF/C -0.5 mA/C Ta 25C LED reverse voltage VR 5 V Connection temperature Tj 125 C 20 V 450 mA Output Load voltage (AC peak/DC) VOFF Continuous load current IO ON current reduction rate ION/C -4.5 Connection temperature Tj mA/C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta 25C 125 C Dielectric strength between input and VI-O output (See note 1.) 1,500 Vrms AC for 1 min Operating temperature Ta -20 to +85 C With no icing or condensation Storage temperature Tstg -40 to +125 C With no icing or condensation Soldering temperature (10 s) --- 260 C 10 s Minimum Typical Electrical Characteristics (Ta = 25C) Item Input Symbol Maximum Measurement conditions Unit LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 A VR = 5 V Capacity between terminals CT --- 15 --- pF V = 0, f = 1 MHz IFT --- --- 4 mA IO = 100 mA RON --- 0.8 1.2 IF = 5 mA, IO = 450 mA, t = 10 ms Current leakage when the relay is open ILEAK --- 0.2 1.0 nA VOFF = 20 V, Ta = 50C Capacity between terminals --- 5.0 12.0 pF V = 0, f = 100 MHz, t<1s Trigger LED forward current Output Maximum resistance with output ON Note: 2. Turn-ON and Turn-OFF Times IF 1 4 2 3 RL VDD VOUT IF COFF VOUT 10% t ON Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Insulation resistance RI-O 1,000 --- --- M VI-O = 500 VDC, RoH 60% Turn-ON time tON --- 0.2 0.5 ms Turn-OFF time tOFF --- 0.2 0.5 ms IF = 10 mA, RL = 200 , VDD = 20 V (See note 2.) Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD --- --- 20 Operating LED forward current Unit V IF 10 --- 30 mA Continuous load current (AC peak/DC) IO --- --- 450 mA Operating temperature 25 --- 60 C 236 Ta MOS FET Relays G3VM-21LR1 90% t OFF Engineering Data Continuous load current vs. Ambient temperature IO - Ta 80 60 40 20 0 20 40 60 80 100 600 500 400 300 200 100 0 -20 120 0 Continuous load current vs. On-state voltage IO - VON On-state resistance RON () 60 80 100 300 200 100 0 -100 -200 -300 -0.5 0 0.5 I O = 450 mA I F = 5 mA t < 1s 2 1 0 -20 1 Turn ON, Turn OFF time tON, tOFF (S) 300 t OFF 100 t ON 30 10 30 1 0.5 0.3 0.8 0 20 40 60 80 100 100 LED forward current IF (mA) 300 t OFF 200 150 t ON 100 1.4 1.6 1.8 I O = 100 mA t < 1s 4 3 2 1 0 -20 0 20 40 60 80 100 Current leakage vs. Load voltage I LEAK - VOFF VDD = 10 V, RL = 200 I F = 10 mA 250 1.2 Ambient temperature Ta () 400 350 1 5 Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - Ta Ta = 25 C VDD = 10 V, RL = 200 3 3 Ambient temperature Ta () 1000 1 5 Trigger LED forward current vs. Ambient temperature IFT - Ta 3 Turn ON, Turn OFF time vs. LED forward current tON, tOFF - IF 10 10 LED forward voltage VF (V) -400 -500 -1 30 0.1 0.6 120 Current leakage ILEAK (pA) Continuous load current IO (mA) Ta = 25 C I F = 5 mA On-state voltage VON (V) Turn ON, Turn OFF time tON, tOFF (S) 40 Ta = 25 C 50 On-state resistance vs. Ambient temperature RON - Ta 500 400 20 100 Ambient temperature Ta Ambient temperature Ta () Trigger LED forward current I F T (mA) 0 -20 LED forward current vs. LED forward voltage IF - VF LED forward current I F (mA) 100 Continuous load current I O (mA) LED forward current IF (mA) LED forward current vs. Ambient temperature IF - Ta 15 Ta = 25 C 10 5 50 0 -20 0 20 40 60 80 100 0 Ambient temperature Ta ( 5 10 15 20 Load voltage VOFF(v) Output terminal capacitance COFF/COFF(ov) vs. Load voltage COFFVOFF 1 Output terminal capacitance COFF/COFF(ov) Ta = 25 0.8 0.6 0.4 0.2 0 10 20 30 Load voltage VOFF(v) MOS FET Relays G3VM-21LR1 237 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X302-E-1 MOS FET Relays 12/10 Specifications subject to change without notice G3VM-21LR1 Printed in USA