DA108S1 DA112S1 Diode array Features Array of 8 or 12 diodes Low input capacitance Suitable for digital line protection Complies with following standards: IEC 61000-4-2 Level 4 - 15kV (air discharge) - 8kV (contact discharge) SO-8 Figure 1. Functional diagram: DA108S1 Applications Protection of logic side of ISDN S-interface Protection of I/O lines of microcontroller Signal conditioning I/O1 REF1 I/O2 REF2 Description I/O3 REF3 Array of 8 or 12 diodes configured by cells of 2 diodes, each cell being used to protect signal line from transient overvoltages by clamping action. I/O4 REF4 As maximum voltage of each diode is 18 V, maximum input voltage range between two I/Os is either 0 V to 18 V (REF1 = 0 V and REF2 = +18 V) or -9 V to +9 V (REF1 = -9 V and REF2 = +9 V) Figure 2. January 2008 Rev 6 Functional diagram: DA112S1 I/O1 1 8 REF1 I/O2 2 7 I/O6 I/O3 3 6 REF2 I/O4 4 5 I/O5 1/8 www.st.com Characteristics DA108S1 / DA112S1 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 C) Symbol Value Unit 18 V 12 A 0.73 W Storage temperature range -55 to +150 C Tj Operating junction temperature range -55 to +150 C TL Maximum lead temperature for soldering during 10 s. 260 C VRRM IPP P Parameter Repetitive peak reverse voltage (for one single diode) Repetitive peak forward current (1) tp = 8/20 s Power dissipation Tstg 1. The surge is repeated after the device returns to ambient temperature Table 2. Thermal resistance Symbol Rth (j-a) Table 3. Parameter Junction to ambient 2/8 Unit 170 C/W Max. Unit 1. Electrical characteristics(Tamb = 25 C) Symbol VFP Value Parameter Peak forward voltage IPP = 12 A, tp = 8/20 s DA108S1 9 DA112S1 12 V VF Forward voltage IF = 50 mA 1.2 V IR Reverse leakage current VR = 15 V 2 A DA108S1 / DA112S1 Characteristics Figure 3. Input capacitance VCC connected between REF1 and REF2 36 Input applied : DC bias + 950 mV(RMS) at 1 MHZ C (pF) Typical values 34 VCC= 5 V VCC= 15 V 32 REF2 30 28 I/O 26 V CC G 24 22 REF1 0 2 4 6 8 10 12 14 16 DC bias (V) Figure 4. Typical peak forward voltage characteristics (8/20 s pulse) VF (V) Typical values 2.0 1.8 1.6 o Tj = 25 C 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.001 0.01 0.1 I F (A) 1 VF (V) 10.0 9.0 o Tj = 25 C 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 1 Typical values I F (A) 10 20 3/8 Characteristics Figure 5. DA108S1 / DA112S1 Application 1: ISDN interface protection, residual lightning surges at transformer secondary are suppressed by DA108S1 Vcc LOGIC SIDE LINE SIDE A GND Vcc Vss TPIxx B Vcc Vss A GND Vss Vcc TPIxx B Vss DA1xx S1 Figure 6. Application 2: microcontroller I/O port protection Vcc Vcc 4-6 bit input port I/O Vcc I/O c Vcc I/O Vcc I/O DA1xx S1 Note: 4/8 IMPORTANT : DA108S1 must be connected to the reference voltages through REF1 and REF2. DA108S1 / DA112S1 2 Ordering information scheme Ordering information scheme Figure 7. Ordering information scheme DA 1 08 S 1 RL Diode Array Version Number of diodes 08 = 12 12 = 12 Serial Package 1 = SO-8 Packaging RL = Tape and reel Blank = Tube 5/8 Package mechanical data 3 DA108S1 / DA112S1 Package mechanical data Epoxy meets UL94, V0 In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at www.st.com. Table 4. SO-8 dimensions Dimensions ccc C Ref. A2 e b C (Seating Plane) A Millimeters Min. A A1 0.25mm (Gage Plane) L k L1 D Min. Typ. 1.75 A1 0.1 A2 1.25 0.25 Max. 0.069 0.004 0.010 8 5 E1 E b 0.28 0.48 0.011 0.019 0.17 0.23 0.007 0.009 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 1.27 4 0.050 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 8 0 L1 1 0.049 C e k 1.04 0 ccc 0.041 0.10 SO-8 footprint dimensions in mm (inches) 6.8 (0.268) 0.6 (0.024) 4.2 (0.165) 1.27 (0.050) 6/8 Max. h x 45 C Figure 8. Typ. Inches 8 0.004 DA108S1 / DA112S1 4 Ordering information Ordering information Figure 9. Ordering information Order codes Marking Package Weight Base qty Delivery mode 100 Tube 2500 Tape and reel(1) 100 Tube 2500 Tape and reel(1) DA108S1 DA108S DA108S1RL SO-8 0.11 g DA112S1 DA112S DA112S1RL 1. Prefered packaging is tape and reel 5 Revision history Figure 10. Revision history Date Revision Aug-2001 4 Previous release. 15-Feb-2007 5 Reformatted to current standard. Standard typing error corrected. 6 Reformatted to current standards. Added paragraph on maximum input voltage range to Description. Parameters updated in Table 1. Added Pin 1 marker to package illustration. Added Figure 8: SO-8 footprint dimensions in mm (inches). 15-Jan-2008 Changes 7/8 DA108S1 / DA112S1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8