Revised August 2004 NC7S02 TinyLogic HS 2-Input NOR Gate General Description Features The NC7S02 is a single 2-Input high performance CMOS NOR Gate. Advanced Silicon Gate CMOS fabrication assures high speed and low power circuit operation over a broad VCC range. ESD protection diodes inherently guard both inputs and output with respect to the VCC and GND rails. Three stages of gain between inputs and outputs assures high noise immunity and reduced sensitivity to input edge rate. Space saving SOT23 or SC70 5-lead packages Ultra small MicroPak leadless package High Speed; tPD 3.5 ns typ Low Quiescent Power; ICC < 1 A Balanced Output Drive; 2 mA IOL, -2 mA IOH Broad VCC Operating Range; 2V-6V Balanced Propagation Delays Specified for 3V operation Ordering Code: Package Product Code Number Top Mark NC7S02M5X MA05B 7S02 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel NC7S02P5X MAA05A S02 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel NC7S02L6X MAC06A E4 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Order Number Package Description Logic Symbol Supplied As Connection Diagrams IEEE/IEC Pin Assignments for SOT23 and SC70 Pin Descriptions Pin Names Description A, B Inputs Y Output NC No Connect (Top View) Pad Assignments for MicroPak Function Table Y=A+B Inputs Output A B Y L L H L L H H L L H H L (Top Through View) H = HIGH Logic Level L = LOW Logic Level TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. (c) 2004 Fairchild Semiconductor Corporation DS012140 www.fairchildsemi.com NC7S02 TinyLogic HS 2-Input NOR Gate October 1995 NC7S02 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) -0.5V to +7.0V Supply Voltage (VCC) DC Input Diode Current (IIK) Supply Voltage (VCC) @ VIN -0.5V -20 mA Input Voltage (VIN) @ VIN VCC +0.5V +20 mA Output Voltage (VOUT) DC Input Voltage (VIN) -0.5V to VCC + 0.5V 2.0V to 6.0V 0V to VCC 0V to VCC -40C to +85C Operating Temperature (TA) DC Output Diode Current (IOK) Input Rise and Fall Time (tr, tf) @ VOUT < -0.5V -20 mA VCC @ 2.0V 0 to 1000 ns @ VOUT > VCC +0.5V +20 mA VCC @ 3.0V 0 to 750 ns -0.5V to VCC + 0.5V VCC @ 4.5V 0 to 500 ns VCC @ 6.0V 0 to 400 ns DC Output Voltage (VOUT) DC Output Source 12.5 mA or Sink Current (IOUT) Thermal Resistance (JA) DC VCC or Ground Current 25 mA per Output Pin (ICC or IGND ) Storage Temperature (TSTG) SOT23-5 300C/W SC70-5 425C/W -65C to +150C 150C Junction Temperature (TJ) Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of circuits outside databook specifications. Lead Temperature (TL) 260C (Soldering, 10 seconds) Power Dissipation (PD) @ +85C Note 2: Unused inputs must be held HIGH or LOW. They may not float. SOT23-5 200 mW SC70-5 150 mW DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage TA = +25C VCC (V) Min Typ TA = -40C to +85C Max Min 2.0 1.50 1.50 3.0-6.0 0.7 VCC 0.7 VCC Max 2.0 0.50 0.50 0.3 VCC 0.3 VCC 1.90 2.0 1.90 3.0 2.90 3.0 2.90 4.5 4.40 4.5 4.40 6.0 5.90 6.0 5.90 3.0 2.68 2.85 2.63 4.5 4.18 4.35 4.13 6.0 5.68 5.85 5.63 Conditions V 3.0-6.0 2.0 Units V V IOH = -20 A VIN = VIL VIN = VIL VOL LOW Level Output Voltage V IOH = -1.3 mA IOH = -2 mA IOH = -2.6 mA 2.0 0.0 0.10 0.10 3.0 0.0 0.10 0.10 4.5 0.0 0.10 0.10 6.0 0.0 0.10 0.10 3.0 0.1 0.26 0.33 4.5 0.1 0.26 0.33 6.0 0.1 V IOL = 20 A VIN = VIH VIN = VIH V IOL = 1.3 mA IOL = 2 mA IOL = 2.6 mA 0.26 0.33 IIN Input Leakage Current 6.0 0.1 1.0 A VIN = VCC, GND ICC Quiescent Supply Current 6.0 1.0 10.0 A VIN = VCC, GND www.fairchildsemi.com 2 Symbol tPLH, Parameter Propagation Delay tPHL tTLH, Output Transition Time tTHL CIN Input Capacitance CPD Power Dissipation Capacitance TA = +25C VCC (V) Min Typ TA = -40C to +85C Max Min Max 5.0 3.5 15 2.0 19 100 125 3.0 10.5 27 35 4.5 7.5 20 25 6.0 6.5 17 21 5.0 3 10 2.0 25 125 155 3.0 16 35 45 4.5 11 25 31 6.0 9 21 26 Open 2 10 10 5.0 6 Units Conditions Figure Number ns CL = 15 pF ns CL = 50 pF ns CL = 15 pF ns CL = 50 pF Figures 1, 3 (Note 3) Figure 2 Figures 1, 3 pF pF Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tw = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveform; PRR = variable; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7S02 AC Electrical Characteristics NC7S02 Tape and Reel Specification TAPE FORMAT for SOT23 and SC70 Package Tape Designator M5X, P5X Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm www.fairchildsemi.com DIM A DIM B 0.093 0.096 (2.35) (2.45) 0.130 0.130 (3.3) (3.3) DIM F DIM Ko 0.138 0.004 0.053 0.004 (3.5 0.10) (1.35 0.10) 0.138 0.002 0.055 0.004 (3.5 0.05) 4 (1.4 0.11) DIM P1 DIM W 0.157 0.315 0.004 (4) (8 0.1) 0.157 0.315 0.012 (4) (8 0.3) (Continued) TAPE FORMAT for MicroPak Package Tape Number Cavity Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed L6X Cover Tape Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/-0.000 0.567 W1 + 0.078/-0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/-0.00) (14.40) (W1 + 2.00/-1.00) 5 www.fairchildsemi.com NC7S02 Tape and Reel Specification NC7S02 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B www.fairchildsemi.com 6 NC7S02 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A 7 www.fairchildsemi.com NC7S02 TinyLogic HS 2-Input NOR Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8