FR101 THRU FR107 FAST RECOVERY RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Fast switching for high efficiency Construction utilizes void-free molded plastic technique 1.0 ampere operation at TA=55 with no thermal runaway High temperature soldering guaranteed: 250 /10 seconds, 0.375(9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data DIM ENSIONS Case: DO-41 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.33 gram inches DIM Maximum Ratings and Electrical Characteristics @25 mm Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - Note unless otherwise specified Symbols FR 101 FR 102 FR 103 FR 104 FR 105 FR 106 FR 107 FR 107 -STR Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 1000 Volts Average forward rectified current at TA=55 I(AV) 1.0 Amp Peak forward surge current 8.3mS single half sine-wave IFSM 30.0 Amps Maximum instantaneous forward voltage IFM=1.0A, TA=25ae (Note 3) VF 1.3 Volts Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 IR 5.0 100.0 Maximum reverse recovery time (Note 1) T rr Typical junction capacitance (Note 2) CJ 15.0 TJ, TSTG -65 to +175 Operating and Storage temperature range 150 Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (3) Pulse test: pulse width 300uSec, Duty cycle 1% 1 250 A 500 250 nS F RATINGS AND CHARACTERISTIC CURVES 2 RATINGS AND CHARACTERISTIC CURVES 3