VICOR Converter Selection Chart Mi-2 [-] [7] - [J E23) [."] Output Voltage Mi-200 Military High Density [+] Input Voltage Nominal Range _ Transient Z = Ww 2 = 15V DC DC Converters 2 = 28V 18 - 50V! 60V Y = 3.3V 3 = 24V 5 = 155V 100 - 210V 230V 0 = 5V L = 28V 50 to 100 Watts 6 = 270V. 125 - 400V2. 475 M = 10V 4 = 48V 7 = 165V 100 - 310V3 = Features oa Nv @ Inputs: [*s] Product Grade Operating Temp. [; 3] Output Power 28 Vdc per MIL-STD-704D \ = -40C to +85C >5V.OC< SV 155 Vde per MIL-STD-1399A M = 59C to +85C Yo= 5OW = 10A 270 Vdc per MIL-STD-704D X= SW ISA @ AnvO . Wo = 100W 20A y Output: 1 to 95 Vde Yo= 304 @ Up to 23W/cubic inch @ MIL-STD-810 Environments @ 80-90% Efficiency M@ Remote Sense @ Current Limit M@ OVP and Thermal Shutdown @ Power Boosters for Higher Power Outputs For additional output power add Boosters. Change Ml-2xx-xW to MI-Bxx-xW. Inputs from 16 to 400 Vdc: outputs from 1 to 95 Vdc. Consult factory. (1) 16V operation at 70% load. (2) These units rated at 75% load from 125-150 Vjy: 5V @ 100W; 2V and 3.3V @ 30A. (3) Compatible with MI-AIM AC Input Module (4) Transient voltage for 1 second. MI-200 Converter/Booster Specifications (typical at Tgp = 25C, nominal line, 75% load unless otherwise specified) @ ZCS Power Architecture PARAMETER MIN TYP MAX UNITS TEST CONDITIONS : Input Characteristics a Low Noise FM Control Input Voltage Range See input Voltage Chart . . No Load Power Dissipation 1.35 2 Watts _ Product Highlights Output Characteristics ~ too: : sq: Set Point Accuracy 0.5% 1% Vinom The MI Series is designed for Military ~[ogqitine Regulation 0.08% 02% Vow LTO HL, 10% TFL applications and is based on Vicors 0.2% 0.5% Vuow LL to HL, NL to 10% second generation family of zero- Output Temperature Drift 6.01 0.02 YPC 8 itchin. y 1 | Output Noise - pp 1.0% 1.5% Vom \ Whichever is greater current-switching, component eve 100 150 _mv 20 MHz BW DC-DC converters. Operating at Output Voltage Trimming! 50% 110% Vom _ frequencies in excess of 1 MHz, the Remote Sense Compensation 05 Volts Mt er cle ff f-th OVP Set Point 115% 125% 135% Vom Latching Series . ers state-of-the-art Current Limit 105% 725% Inom Auto restart performance in terms of power Short Circuit Current 105% 130% Thos Auto restart ~ density, efficiency, noise, ease of use Control Pin Characteristics d i bility Gate In High Threshold 6 Volts and Teiabiity. Gate In Low Threshold 0.65 Voits _ Gate In Low Current 6 mA All units are manufactured under Power Sharing Accuracy 0.95 1.05 : Isolation Characteristics a a quality system approved to isolation (Input to Output) 3750 Vaws MIL-I-45208 and in ISO 9001-registered isolation (Output to Baseplate) 500 - Vams facilities. Full epoxy encapsulation in polation Gnput to Baseplate) 2,500 5 7 Vas _ : tos Input/Output Capacitance 3 p Vicors industry standard package Environmental (MIL-STD-8100) enables the MI Series to meet Altitude - Method 500.2 40,000 feet Procedure 3 MIL-STD-810 environmental Humidity - Method 507.2 86, 240 %, hours _ Procedure 1, Cycle 1 . sas Acceleration - Method 513.3 9qg's Procedure 2 requirements for humidity, fungu 8, Vibration - Method 514.3 20 g's Procedure 1, Category 6 salt fog, explosive atmosphere, Shock - Method 516.3 40 g's Procedure 1 acceleration, vibration and shock. Reliability (MIL-HDBK-217E) ___ " 25C Ground Benign: G.B. 864,000 Hours - : 50C Naval Sheltered: N.S. 111,000 Hours Standard features such as wide output _~6 airborne inhabited Cargo: AIC. 81,000 Hours trimming / programming, current Thermal Characteristics imit inhibi Efficiency 80-90% limiting, remote sense, output : bit Baseplate to Sink 7 02 CWatt___With thermal pads and latching OVP & OTP combine to Shutdown Temperature 90 95 105 7 Latching offer a high degree of protection, Baseplate Operating Temperature +85 C See Product Grade versatility and reliability for military Storage Temperature +100 ene See Product Grade Mechanical Specifications power systems. Volume 435 in Weight 6.0 (170) Ounces (Grams) 100 V42V and 15V outputs, standard trim range +10%. Consuit factory for wider trim range.Additional Defense Products Mil-Joo Military DC-DC Converters B Inputs: 28, 155, 270 Vde @ Single Output: 1 to 95 Vdc m@ 10W, 25W and 50W @ Up to 23 Watts/Cubic Inch B 80-90% Efficiency @ Size: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7) @ MIL-STD-810 Environments MI-RAM Ripple Attenuator Module @ Reduces PARD to <3 mV p-p @ Compatible with Any MI-based Product 5 to 50 Vde m@ Full Attenuation Up to 20A Load m No Adjustment Required B 93-99% Efficiency @ Converter Sense, Trim, OV and OI Retained @ Size: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7) @ MIL-STD-810 Environments Mii-lAM Input Attenuator/Filter Module m@ 28 and 270 Vde Inputs m MIL-STD-461 EMI Filter m@ MIL-STD-704A and MIL-STD-1275A w Reverse Polarity Protection m@ 250W Output @ Size: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7) @ MIL-STD-810 Environments Ai, VIGOR 1-800-735-6200 101 Product Grade Specifications oe oe . Product Grade ee Parameter { M Storage Temperature -55C to +100C -68C to +100C Operating Temperature (baseplate) -40C to +85C -55C to +85C Power Cycling Burn-in 12 hours, 25 cycles 96 hours, 200 cycles Temperature Cycled with Power Off 48 hours, 12-16 cycles 48 hours, 12-16 cycles -55C to +100C -65C to +100C Test Data Supplied at These Temperatures ~40C, +80C -55C, +80C Warranty years si( OSC: Environmental Compliance MIL-STD-810 MIL-STD-810 Derating NAVMAT P-4855-1A NAVMAT P-4855-1A Mechanical Drawing 4.60 (116,8) _-_-_____-+ ~-{ 50 3.60 (91,4) (42,7) 1.80 30(7,6) ey (45,7) 013 (O98) .080 (2,0) Dia (2) places Solder piate {h / over copper alloy Pin #_] Function a re 71 4 2 Gate In E od] 3 Gate Out ato 3 3 5 fie . MI-200 Tey a bsen 1 PT ss 3) (53,4) - 6e4 Cina (25. .4) 6*_ | +Sense Lae Ein 7 Be 62, 8 -Sense \ ni Co 9 | -Out C XC FULL A * Da not connect on . 45 .040 (1,0) Dia (7) places Booster modules (3,8) Product (D Solder plate (3.8) this surface over copper alloy 2.40 (61,0) 4,20 (106.7) 30 (7,6) 22 (5,6) MIN Min r (44.5) Ta poten | +00 (0,76) i_t LI imi I 50 (2, 7). TO T S00 / 12 (3,0) Aluminum Base JL