22355 Abracon CORX 2-29.qxd 3/6/00 6:51 AM Page 13 MICROPROCESSOR CRYSTALS CERAMIC SURFACE MOUNT MICRO MINIATURE ABMM and ABMM1 SEE NOTE 1 FEATURES: * * * * * Low in height; (1.1mm) suitable for thin equipment. AT Strip Cut offering a tight tolerance and stability. Ceramic package assures high reliability. Suitable for solder reflow. Ceramic Lid Option (-K) See Note. SEE NOTE 2 (TOP VIEW) NOTE 1: A longer pad 3 (1.6mm) may appear on bottom pattern. NOTE 2: A cut of 0.3mm may appear on pad 2 of bottom pattern. Pad 2 and 4 are connected to metal lid. APPLICATIONS: * PCMCIA applications. * Suitable for thin equipment. METAL LID STANDARD SPECIFICATIONS FrequencyRange Range Frequency Operation Mode Operation Mode Operating Temperature Operating Temperature Storage Temperature Storage Temperature Frequency Tolerance @ 25C FrequencyStability Tolerance @ Temp. 25C Frequency over Frequency Stability over Temp. Equivalent Series Resistance (ESR) Maximum Equivalent Series Resistance (ESR) Fundamental 3rd Overtone Shunt Capacitance C0 Shunt Capacitance C0 Load Capacitance CL Load Capacitance CL Drive Level Drive Level Aging @ 25 C First Year Aging @ 25C per Year Insulation Resistance Insulation Resistance: OR 8.0003.5MHz MHz- 90 - 25MHz MHz 8.0 MHz ~ 32 MHz AT (Fundamental) Fundamental, 28 MHz ~ 90 MHz (3rd overtone) -10C to + 60 C (See Options) -10C-55C to + 60C (See Options) to + 125 C -40C50 to +ppm 85C max. (See Options) 50 50 ppmppm max.max. (See(See Options) Options) 50 200 ppmmax. (See Options) for 3.5 MHz < F < 4.0 MHz for 4.0 <F MHz -10C to<+6.0 60C (FB) 100150 ppmmax. @ MHz for < F <to10.0 MHz 60 100 max. for 6.0 F ~ MHz 8.0 MHz 15.999 MHz for < F <to14.0 MHzMHz 50 80max. for10 F ~MHz 16 MHz 32.000 _ 25 MHz 50 for 14 MHz < F < 100 max. for F ~ 28 MHz to 90.000 MHz 7 pF max. 7 pF max. 16 p F (See Option) 18 pF (See Options) 100 max. 500 W max, 100 W correlation 5 pp m max. 5 ppm max. 500 M min. at 100 Vdc 15V 500 M min. at 100 Vdc 15 V CERAMIC LID (-K) CERAMIC (BOTTOM VIEW) RECOMMENDED LAND PATTERN Please see environmental, and mechanical specifications on page 68, Group 2. Marking, see page 76. Tape and Reel, see pages 74-75 (1,000 pcs / reel). Dimensions: Inches (mm) ORDERING OPTIONS ABMMX - Frequency - CL - ESR - Temperature - Tolerance - Stability - Lid Material - Mode - Packaging Blank or 1 RXXX (value in ) XX.XXXX MHz Load cap.in pF or -S for Series -E for 0C -B for -20C -C for -30C -N for -30C -D for -40C to + 70C to + 70C to + 70C to + 85C to + 85C -K (Ceramic Lid) -1 -2 -3 -4 for 10 ppm for 20 ppm for 25 ppm for 30 ppm -X -W -Y -H for 20 ppm max. for 25 ppm max. for 30 ppm max. for 35 ppm max. -T (Tape & Reel) PACKAGE H MAX. ABMM1 0.043 (1.1) _ 28 MHz) -F (for Fundamental AT > - FB (Fundamental BT)* (*) 100 ppm max. stability from -10C. to 60C only. Contact us for tighter tolerance and stability. Certain restrictions apply on selected frequencies and frequency stabilities. ABRACON IS ISO 9001 / QS 9000 CERTIFIED NOTE: Left blank if standard * All specifications and markings subject to change without notice 29 Journey * Aliso Viejo, CA 92656 * USA (949) 448-7070 * F AX : (949) 448-8484 E-MAIL: abinfo @ abracon.com * INTERNET ADDRESS: www.abracon.com ABRACON (R) C O R P O R AT I O N - 13 -