Crystal oscillator Product Number (please contact us) X1G0036x1xxxx00 CRYSTAL OSCILLATOR Low Profile / High stability SPXO SG - 211 S*E Frequency range : 2.375 MHz to 60.000 MHz Supply voltage : 1.8 V / 2.5 V / 3.3 V Current consumption : 1.2 mA Typ. (SEE: 1.8 V No load condition 40 MHz) Function : Standby( ST ) External dimensions : 2.5 x 2.0 x 0.7 mm Actual size Specifications (characteristics) Item Symbol f0 Output frequency range Supply voltage VCC Storage temperature Operating temperature T_stg T_use Frequency tolerance * f_tol Current consumption ICC Stand-by current Symmetry I_std SYM VOH VOL Output voltage Output load condition (CMOS) Specifications SG-211SDE SG-211SEE SG-211SCE Please contact us about available frequencies. 2.375 MHz to 60.000 MHz 1.8 V Typ. 2.5 V Typ. 3.3 V Typ. 1.6 V to 2.2 V 2.2 V to 2.7 V 2.7 V to 3.6 V -40 C to +125 C -40 C to +90 C D: 20 x 10-6, E: 15 x 10-6 H: 20 x 10-6, T: 15 x 10-6 a: 15 x 10-6, b: 20 x 10-6,d: 25 x 10-6 2.3 mA Max. 2.5 mA Max. 3.5 mA Max. 2.8 mA Max. 3.0 mA Max. 4.0 mA Max. 3.3 mA Max. 3.5 mA Max. 4.5 mA Max. 4.5 mA Max. 5.0 mA Max. 6.0 mA Max. 5.0 A Max. 45 % to 55 % 90 % VCC Min. 10 % VCC Max. L_CMOS 15 pF Max. Input voltage VIH VIL 80 % VCC Min. 20 % VCC Max. Rise time / Fall time tr/ tf 4.5 ns Max. Start-up time t_str 5 ms Max. f_aging This is included in frequency tolerance specification. Frequency aging Conditions / Remarks Storage as single product. -20 C to +70 C VCC 10% -40 C to +85 C included in reflow drift -40 C to +90 C No load condition,2.375 MHzf032 MHz No load condition,32 MHz<f040 MHz No load condition,40 MHz<f048 MHz No load condition,48 MHz<f060 MHz ST =GND 50 % VCC level,L_CMOS 15 pF IOH=-4 mA IOL= 4 mA ST terminal 20 % VCC to 80 % VCC level, L_CMOS=15 pF t=0 at 90 % VCC +25 C, First year, VCC= 1.8 V, 2.5 V, 3.3 V * Please contact us for inquiries regarding available frequency tolerance. External dimensions (Unit:mm) Footprint (Recommended) C (ex. 0.01 F) 2.50.15 #4 (Unit:mm) #3 #4 #3 #2 #2 0.70.1 #1 0.9 0.8 Pin map Pin Connection ST 1 2 GND 3 OUT 4 VCC Note. ST pin = HIGH : Specified frequency output. ST pin = LOW : Output is high impedance, oscillation stops. #3 0.9 E933A 1.1 #4 #1 1.3 40.00T 0.7 0.6 2.00.15 Resist #2 #1 1.7 To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND).