EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Feature
ԦRoHS compliant.
ԦChip LED package.
ԦWide viewing angle 130o.
ԦColorless clear resin.
ԦWavelength: 605nm
ԦBrightness: 9 to 18 mcd at 2mA
ԦInner reflector and white package.
ԦUseable in severe lead free processes with automotive reflow profile (IR reflow or wave soldering)
Applications
ԦAutomotive audio and video equipments.
ԦBacklight: LCD, switches, symbol, mobile phone and illuminated advertising.
ԦDisplay for indoor and outdoor application.
ԦIdeal for coupling into light guides.
ԦSubstitution of traditional light.
ԦOptical indicator.
Device Selection Guide
Chip
Material
Emitted Color Resin Color
AlGaInP Brilliant Orange Water Clear
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Absolute Maximum Ratings (Ta=25 )кParameter Symbol Rating Unit
Reverse Voltage VR 10 V
Forward Current IF 50 mA
Peak Forward Current
(Duty 1/10 @1KHz) IFP 100 mA
Power Dissipation Pd 120 mW
Junction Temperature Tj 115 к
Operating Temperature Topr -40 ~ +100 к
Storage Temperature Tstg -40 ~ +110 к
Rth J-A 800 K/W
Thermal resistance
Rth J-S 450 K/W
Soldering Temperature Tsol Reflow Soldering : 260 к for 30 sec.
Hand Soldering : 350 for 3 sec.к
ESDHBM 2000 V
ESD
(Classification acc. AEC Q101) ESDMM 200 V
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Electro-Optical Characteristics (Ta=25 )кParameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity Iv 9.0 ----- 18.0 mcd IF=2mA
Viewing Angle 2 1/2 ----- 130 ----- deg IF=2mA
Peak Wavelength !p ----- 611 ----- nm IF=2mA
Dominant Wavelength !d 604 ---- 610 nm IF=2mA
Spectrum Radiation Bandwidth "! ----- 17 ----- nm IF=2mA
Forward Voltage VF 1.55 ---- 2.15 V IF=2mA
Reverse Current IR ----- ----- 10 #A VR=10V
Temperature coefficient of !p TC!p ----- 0.13 ----- nm/K IF=2mA
Temperature coefficient of !d TC!d ----- 0.08 ----- nm/K IF=2mA
Temperature coefficient of VF TCV ----- -4.3 ----- mV/K IF=2mA
Note:
Tolerance of Luminous Intensity: ±11%
Tolerance of Dominant Wavelength: ±1nm
Tolerance of Forward Voltage: ±0.1V
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Bin Range of Luminous Intensity
Bin Code Min. Max. Unit Condition
K2 9.00 11.5
L1 11.5 14.5
L2 14.5 18.0
mcd IF=2mA
Note:
Tolerance of Luminous Intensity: ±11%
Bin Range of Dominant Wavelength
Bin Code Min. Max. Unit Condition
1 604 607
2 607 610
nm IF=2mA
Note:
Tolerance of Dominant Wavelength: ±1nm
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Typical Electro-Optical Characteristics Curves
Typical curve of spectral distribution:
Note: V(!)=Standard eye response curve
Diagram characteristics of radiation
70o
80o
60o
50o
40o
30o
20o10o
0
1.0
0o
0.6
0.2
0.4
0.8
1.0
View Angle
Relative Intensity
View Angle
Relative Intensity
80o
60o
40o
20o
0
0.2
0.4
0.6
0.8
90o
˃ˈ˃˄˃˃ˇ˃˃ˇˈ˃ˈ˃˃ˈˈ˃ˉ˃˃ˉˈ˃ˊ˃˃
ӳʳʻʼ
˥˸˿˴˼˸ʳ˜˸˼ʳʻʸʼ
V(ӳ)˦˅˦˖
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Forward Current vs. Forward Voltage (Ta=25 )к
Dominant Wavelength vs. Forward Current (Ta=25 )к
ˉ˃ˇˉ˃ˇˁ˄ˉ˃ˇˁ˅ˉ˃ˇˁˆˉ˃ˇˁˇˉ˃ˇˁˈˉ˃ˇˁˉˉ˃ˇˁˊˉ˃ˇˁˋˉ˃ˇˁˌ˃˄˅ˆˇˈˉˊˋˌ˄˃˄˄
˗˼˴ʳ˪˴˸˿˸˺˻ʻʼ
Forward Current (mA)
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Relative Luminous Intensity vs. Forward Current (Ta=25 )кForward Current vs. Ambient and Solder Temperature
0.0
5.0
10.0
15.0
20.0
25.0
30.0
0 5 10 15 20 25 30
Forward Current (mA)
Relative Luminous Intensity
0
10
20
30
40
50
60
70
0 20 40 60 80 100
Temperature (к)
Forward Curent I
F
(mA)
T
A
temp. ambient
T
S
temp. solder
TA
TS
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Relative Luminous Intensity vs. Junction Temperature
Note: f(Tj) = Iv / Iv(25 )кΙIF=2mA
Relative Forward Voltage vs. Junction Temperature
NoteΚVϦF = VF - VF (25 ) = f(кTj); IF=2mA
˃˃ˁ˅˃ˁˇ˃ˁˉ˃ˁˋ˄˄ˁ˅˄ˁˇ˄ˁˉˀ˅˃˃˅˃ˇ˃ˉ˃ˋ˃˄˃˃˄˅˃˝˶˼ʳ˧˸˸˴˸ʳ˧˽ʳʻкʼ
˥˸˿˴˼˸ʳ˟˼ʳ˜˸˼
ˀ˃ˁˇˀ˃ˁˆˀ˃ˁ˅ˀ˃ˁ˄˃˃ˁ˄˃ˁ˅˃ˁˆ˃ˁˇˀ˅˃˃˅˃ˇ˃ˉ˃ˋ˃˄˃˃˄˅˃˝˶˼ʳ˧˸˸˴˸ʳ˧˽ʳʻкʼ
˥˸˿˴˼˸ʳ˙˴˷ʳ˩˿˴˺˸
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Package Dimension
1.4
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Label Explanation
ԦCPN: Customer’s Product Number
ԦP/N: Product Number
ԦQTY: Packing Quantity
ԦCAT: Luminous Intensity Rank
ԦHUE: Dom. Wavelength Rank
ԦREF: Forward Voltage Rank
ԦLOT No: Lot Number
Reel Dimensions
Note: Unit = mm
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
Moisture Resistant Packaging Process and Materials
Label Desiccant Label
Aluminum moisture-proof bag
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
Precautions for Use
1. Soldering Condition
1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile
Note:
Preheat
Temperature min (Tsmin) 150 °C
Temperature max (Tsmax) 200°C
Time (Tsmin to Tsmax) (ts) 60-120 seconds
Average ramp-up rate (Tsmax to Tp) 3 °C/second max.
Other
Liquidus Temperature (TL) 217 °C
Time above Liquidus Temperature (t L) 60-150 sec
Peak Temperature (TP) 260°C
Time within 5 °C of Actual Peak Temperature: TP - 5°C 30 s
Ramp- Down Rate from Peak Temperature 6°C /second max.
Time 25°C to peak temperature 8 minutes max.
Reflow times 3 times
All parameters are maximum body case temperature values and cannot be considered as a
soldering profile. The body temperature was measured by soldering a thermal couple to the
soldering point of LEDs.
Reference: IPC/JEDEC J-STD-020D
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
1206 Package Chip LED
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 13 of 13
Device No. DSA-151-001 Prepared date: 29-July-2008 Created by: Eddie Wang
(B) Recommend soldering pad
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
2. Current limiting
A resistor should be used to limit current spikes that can be caused by voltage fluctuations.
Otherwise damage could occur.
3. Storage
3.1 Moisture proof bag should only be opened immediately prior to usage.
3.2 Environment should be less than 30к and 90% RH when moisture proof bag is opened.
3.3 After opening the package MSL Conditions stated on page 1 of this spec should not be
exceeded.
3.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component
should be baked at min. 60deg +/-5deg for 25 hours.
4. Iron Soldering
Hand soldering is not recommended for regular production. These guidelines are for rework only.
Soldering iron tip should contact each terminal no more than 3 sec at 350к, using soldering iron
with nominal power less than 25W. Allow min. 2 sec. between soldering intervals.
5. Usage
Do not exceed the values given in this specification.
Application Restrictions
1. High reliability applications such as military/aerospace, automotive safety/security systems, and
medical equipment may require different product. If you have any concerns, please contact
Everlight before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.