HDSM-431x/433x
0.39” (10.0mm)
Single digit surface mount LED display
Data Sheet
Description
This is 0.39” (10.0mm) height single digit display. This
device utilizes AlInGaP / GaAs chips.This device is with
top surface gray and white segments.
Features
x 0.39” digit height
x Low current operation
x Excellent characters appearance
x Available in CA and CC
x 1000 pieces per reel
x Moisture Sensitivity Level: Level 3
x RoHS compliant
Package Dimensions
Ordering Information
Red Green Yellow Orange Description
HDSM-431C HDSM-431H HDSM-431F HDSM-431L Common Anode, Right Hand Decimal
HDSM-433C HDSM-433H HDSM-433F HDSM-433L Common Cathode, Right Hand Decimal
Note:
1. All dimensions are in millimeters.
2. Tolerance are +/- 0.25mm unless otherwise specied.
2
Pin Connection (Common Anode)
PIN No Connection
1 Cathode E
2 Cathode D
3 Common Anode
4 Cathode C
5 Cathode DP
6 Cathode B
7 Cathode A
8 Common Anode
9 Cathode F
10 Cathode G
Internal Circuit Diagram (Common Anode)
$%& ' () *'3
Pin Connection (Common Cathode)
PIN No Connection
1 Anode E
2 Anode D
3 Common Cathode
4 Anode C
5 Anode DP
6 Anode B
7 Anode A
8 Common Cathode
9 Anode F
10 Anode G
Internal Circuit Diagram (Common Cathode)
$%& ' () *'3
Absolute Maximum Ratings @ TA=25°
Parameter Green/Yellow/Red/Orange Unit
Power Dissipation Per Segment 65 mW
Peak Forward Current Per Segment
(1/10 Duty Cycle. ,0.1ms pulse width)
100 mA
Continuous Forward Current Per Segment
Derating Linearly From 25°C Per Segment
25 mA
0.25 mA/ °C
Reverse Voltage Per Segment 5 V
Operating Temperature Range -40°C to +105°C
Storage Temperature Range -40°C to +105°C
3
Electrical / Optical Characteristics @ TA=25°C
Green
Parameters Symbol Min Typ Max Unit Test Condition
Average Luminous Intensity IV5.4 9 - Mcd IF = 10mA
Emissions Wavelength Op/Od- 572/571 - Nm IF = 20mA
Spectral Line Half-Width 'O -20-NmI
F = 20mA
Forward Voltage, Per Segment VF- 2.1 2.6 V IF = 20mA
Reverse Current, Per Segment IR- 100 PAVR = 5V
Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA
Yellow
Parameters Symbol Min Typ Max Unit Test Condition
Average Luminous Intensity IV8.6 15 - Mcd IF = 10mA
Emissions Wavelength Op/Od- 591/589 - Nm IF = 20mA
Spectral Line Half-Width 'O -15-NmI
F = 20mA
Forward Voltage, Per Segment VF- 2.1 2.6 V IF = 20mA
Reverse Current, Per Segment IR- 100 PAVR = 5V
Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA
Red
Parameters Symbol Min Typ Max Unit Test Condition
Average Luminous Intensity IV8.6 14.3 - Mcd IF = 10mA
Emissions Wavelength Op/Od- 644/630 - Nm IF = 20mA
Spectral Line Half-Width 'O -20-NmI
F = 20mA
Forward Voltage, Per Segment VF- 2.0 2.6 V IF = 20mA
Reverse Current, Per Segment IR- 100 PAVR = 5V
Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA
Orange
Parameters Symbol Min Typ Max Unit Test Condition
Average Luminous Intensity IV8.6 16 - Mcd IF = 10mA
Emissions Wavelength Op/Od- 611/605 - Nm IF = 20mA
Spectral Line Half-Width 'O -17-NmI
F = 20mA
Forward Voltage, Per Segment VF- 2.1 2.6 V IF = 20mA
Reverse Current, Per Segment IR- 100 PAVR = 5V
Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA
4
Typical Electrical / Optical characteristic curves @ TA=25°C
5HODWLYH/XPLQRXV,QWHQVLW\
5HODWLYH/XPLQRXV,QWHQVLW\
:DYHOHQJWKQP
1RUPDOL]HGWRDWP$
)RUZDUG&XUUHQW,)P$
)RUZDUG&XUUHQW,)P$
)RUZDUG&XUUHQW,)P$
)RUZDUG9ROWDJH9
$PELHQW7HPSHUDWXUH&
*
*
*
*
Green
Figure 1. Relative Luminous Intensity vs. Wavelength Figure 2. Relative Luminous Intensity vs. Forward Current
Figure 3. Allowable DC Current vs. Ambient Temperature Figure 4. Forward Current vs. Forward Voltage
5
Yellow
5HODWLYH,QWHQVLW\
5HODWLYH,QWHQVLW\
:DYHOHQJWKQP
1RUPDOL]HGWRDWP$
)RUZDUG&XUUHQW,)P$
Figure 1. Relative Intensity vs. Wavelength Figure 2. Relative Intensity vs. Forward Current
Figure 3. Allowable DC Current vs. Ambient Temperature Figure 4. Forward Current vs. Forward Voltage
)RUZDUG&XUUHQW,)P$
)RUZDUG&XUUHQW,)P$
)RUZDUG9ROWDJH9
$PELHQW7HPSHUDWXUH&
6
Red
5HODWLYH/XPLQRXV,QWHQVLW\
:DYHOHQJWKQP
1RUPDOL]HGWRDWP$
)RUZDUG&XUUHQW,)P$
)RUZDUG&XUUHQW,)P$
)RUZDUG&XUUHQW,)P$
)RUZDUG 9ROWDJH9
$PELHQW 7HPSHUDWXUH
&
5
5
5
5
5HODWLYH/XPLQRXV,QWHQVLW\
Figure 1. Relative Luminous Intensity vs. Wavelength Figure 2. Relative Luminous Intensity vs. Forward Current
Figure 3. Allowable DC Current vs. Ambient Temperature Figure 4. Forward Current vs. Forward Voltage
7
Orange
5HODWLYH,QWHQVLW\
:DYHOHQJWKQP
1RUPDOL]HGWRDWP$
)RUZDUG&XUUHQW,)P$
)RUZDUG&XUUHQW,)P$
)RUZDUG&XUUHQW,)P$
)RUZDUG9ROWD
J
H
9
$PELHQW7HPSHUDWXUH&
5HODWLYH,QWHQVLW\
Figure 1. Relative Intensity vs. Wavelength Figure 2. Relative Intensity vs. Forward Current
Figure 3. Allowable DC Current vs. Ambient Temperature Figure 4. Forward Current vs. Forward Voltage
8
Intensity Bin Limits (mcd)
Green
IV Bin Category Min. Max.
M 5.401 8.6
N 8.601 13.7
P 13.701 21.8
Tolerance: ±15%
Yellow
IV Bin Category Min. Max.
N 8.601 13.7
P 13.701 21.80
Q 21.801 34.7
Tolerance: ±15%
SMT Soldering Prole
Pb free reow soldering Prole
Red
IV Bin Category Min. Max.
N 8.601 13.7
P 13.701 21.80
Q 21.801 34.7
Tolerance: ±15%
Orange
IV Bin Category Min. Max.
N 8.601 13.7
P 13.701 21.80
Q 21.801 34.7
R 34.701 55.2
Tolerance: ±15%
Note:
1. Bin categories are established for classication of products. Products
may not be available in all categories. Please contact your Avago
representative for information on currently available bins.
Recommended soldering pattern (unit: mm)
2.6
1.9 x 4 = 7.6
12.8
1.4
Recommended stencil window opening is 80%
245°C
TIME
TEMPERATURE
6°C/SEC. MAX.
100 SEC. MAX.
60 - 120 SEC.
3°C/SEC. MAX.
3°C/SEC. MAX.
10 - 30 SEC.
150°C
200°C
217°C
(Acc. to J-STD-020C)
Notes:
1. The peak temperature refers to the peak package body
temperature.
2. Number of reow process shall be limited to maximum 2 times only.
Cooling process to normal temperature is required between rst
and second soldering process.
Tape specication (unit: mm)
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved.
AV02-0708EN - March 17, 2011
