ZMM12 - General Semiconductor, Inc.

FEATURES

♦Silicon Planar Zener Diodes

♦In Mini-MELF case especially for automatic insertion.

♦The Zener voltages are graded according to the

international E 24 standard. Smaller voltage

tolerances and other Zener voltages are available

upon request.

♦These diodes are also available in DO-35 case with the type

designation ZPD1 … ZPD51.

MECHANICAL DATA

Case: Mini-MELF Glass Case (SOD-80)

Weight: approx. 0.05 g

MAXIMUM RATINGS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOL VALUE UNIT

Zener Current (see Table “Characteristics”)

Power Dissipation at Tamb = 25°C Ptot 500(1) mW

Junction Temperature Tj175 °C

Storage Temperature Range TS– 55 to +175 °C

ZMM1 THRU ZMM75

ZENER DIODES

1/20/99

.142 (3.6) .019 (0.48)

∅

Ca thode Mark

.063 (1.6)

.134 (3.4)

.055 (1.4)

.011 (0.28)

Mini-MELF

Dimensions are in inches and (millimeters)

SYMBOL MIN. TYP. MAX. UNIT

Thermal Resistance RthJA – – 0.3(1) °C/W

Junction to Ambient Air

NOTES:

(1) Valid provided that electrodes are kept at ambient temperature.

ZMM1(3) 0.7 ... 0.8 6.5 (< 8) < 50 – 26 ... – 23 – 280 340

ZMM2.7 2.5 ... 2.9 75 (< 83) < 500 – 9 ... – 4 – 135 160

ZMM3 2.8 ... 3.2 80 (< 95) < 500 – 9 ... – 3 – 117 140

ZMM3.3 3.1 ... 3.5 80 (< 95) < 500 – 8 ... – 3 – 109 130

ZMM3.6 3.4 ... 3.8 80 (< 95) < 500 – 8 ... – 3 – 101 120

ZMM3.9 3.7 ... 4.1 80 (< 95) < 500 – 7 ... – 3 – 92 110

ZMM4.3 4.0 ... 4.6 80 (< 95) < 500 – 6 ... – 1 – 85 100

ZMM4.7 4.4 ... 5.0 70 (< 78) < 500 – 5 ... +2 – 76 90

ZMM5.1 4.8 ... 5.4 30 (< 60) < 480 – 3 ... +4 > 0.8 67 80

ZMM5.6 5.2 ... 6.0 10 (< 40) < 400 – 2 ... +6 > 1 59 70

ZMM6.2 5.8 ... 6.6 4.8 (< 10) < 200 – 1 ... +7 > 2 54 64

ZMM6.8 6.4 ... 7.2 4.5 (< 8) < 150 +2 ... +7 > 3 49 58

ZMM7.5 7.0 ... 7.9 4 (< 7) < 50 +3 ... +7 > 5 44 53

ZMM8.2 7.7 ... 8.7 4.5 (< 7) < 50 +4 ... +7 > 6 40 47

ZMM9.1 8.5 ... 9.6 4.8 (< 10) < 50 +5 ... +8 > 7 36 43

ZMM10 9.4 ... 10.6 5.2 (< 15) < 70 +5 ... +8 > 7.5 33 40

ZMM11 10.4 ... 11.6 6 (< 20) < 70 +5 ... +9 > 8.5 30 36

ZMM12 11.4 ... 12.7 7 (< 20) < 90 +6 ... +9 > 9 28 32

ZMM13 12.4 ... 14.1 9 (< 25) < 110 +7 ... +9 > 10 25 29

ZMM15 13.8 ... 15.6 11 (< 30) < 110 +7 ... +9 > 11 23 27

ZMM16 15.3 ... 17.1 13 (< 40) < 170 +8 ... +9.5 > 12 20 24

ZMM18 16.8 ... 19.1 18 (< 50) < 170 +8 ... +9.5 > 14 18 21

ZMM20 18.8 ... 21.2 20 (< 50) < 220 +8 ... +10 > 15 17 20

ZMM22 20.8 ... 23.3 25 (< 55) < 220 +8 ... +10 > 17 16 18

ZMM24 22.8 ... 25.6 28 (< 80) < 220 +8 ... +10 > 18 13 16

ZMM27 25.1 ... 28.9 30 (< 80) < 250 +8 ... +10 > 20 12 14

ZMM30 28 ... 32 35 (< 80) < 250 +8 ... +10 > 22.5 10 13

ZMM33 31 ... 35 40 (< 80) < 250 +8 ... +10 > 25 9 12

ZMM36 34 ... 38 40 (< 90) < 250 +8 ... +10 > 27 9 11

ZMM39 37 ... 41 50 (< 90) < 300 +10 ... +12 > 29 8 10

ZMM43 40 ... 46 60 (< 100) < 700 +10 ... +12 > 32 7 9.2

ZMM47 44 ... 50 70 (< 100) < 750 +10 ... +12 > 35 6 8.5

ZMM51 48 ... 54 70 (< 100) < 750 +10 ... +12 > 38 6 7.8

ZMM56 52.0 … 60.0(4) <135(4) <1000(5) typ. +10(4) –– –

ZMM62 58.0 … 66.0(4) <150(4) <1000(5) typ. +10(4) –– –

ZMM68 64.0 … 72.0(4) <200(4) <1000(5) typ. +10(4) –– –

ZMM75 70.0 … 79.0(4) <250(4) <1500(5) typ. +10(4) –– –

NOTES:

(1) Tested with pulses tp= 5 ms

(2) Valid provided that electrodes are kept at ambient temperature

(3) The ZMM1 is a silicon diode operated in forward direction. Hence, the index of all parameters should be “F” instead of “Z”

Connect the cathode electrode to the negative pole

(4) at IZ= 2.5 mA

(5) at IZ= 0.5 mA

ZMM1 THRU ZMM75

ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

Type Zener Voltage(1)

IZ= 5 mA

VZV

IZ= 5 mA

f = 1 kHz

rzj Ω

IZ= 1 mA

f = 1 kHz

rzj Ω

Temp. Coeff.

of Zener Voltage

IZ= 5 mA

αVZ 10–4/K

Reverse

Voltage

IR= 100 nA

VRV

Tamb = 45°C

IZ= mA

Admissable Zener current(2)

Tamb = 25°C

IZ= mA

Dynamic Resistance