DATASHEET Common-mode Chokes RN series
Current-compensated Chokes
Rated currents from 0.3 to 10 A
DC to 1kHz frequency
100kHz to 3MHz common-mode resonance
frequency
Dual-choke configurations
Multiple PCB-mounting options
Technical specifications
Flammability corresponding to UL 94 V-0
High potential test voltage
winding-to-housing @ 25°C 4000 VAC, 60 sec, guaranteed
winding-to-winding @ 25°C 1500 VAC, 60 sec, guaranteed
1500 V, 50 Hz, 2 sec, factory test
Maximum continuous operating voltage 250 VAC
MTBF @ 40°C/230V (Mil-HB-217F) > 5,000,000 hours
Operating frequency 50/60 Hz
Rated currents 0.3 to 10 A @ 40 °C max.
Surge current @ 10msec 20 x Inominal @ 25°C
Temperature range (operation and storage) -40 °C to +125 °C (40/125/56)
Approvals
VDE: excluding RN 102, RN 202
RN chokes are attenuating common-mode or
asymmetric (P/N > E) interference signals, by being
connected in series with the phase and neutral lines
of an AC powerline input. Symmetrical components
of the noise are also attenuated by the leakage
inductance of the windings. These chokes are
typically used in conjunction with suppression
capacitors.
Features and benefits
High saturation resistance and excellent thermal
behavior
Through hole pin connections
Dual-choke configuration
Small compact design
Multiple housing options
Custom-specific versions are available on request
Typical applications
Phase-angle control circuits in combination with
saturating chokes
EMI input filters
For suppressing equipment with no earth
connection
Suppressing high interference levels
Typical electrical schematic
EMC/EMI Products Schaffner Group Datasheets 2014
Choke selection table
Choke* Nominal current Inductance Resistance Choke Input/Output Weight
@ 40 °C L R configuration connections Type 1 Type 2
[A] [mH/path] [mΩ/path] [Qty] [g] [g]
RN x02-0.3-02 0.3 12 1275 2 -02 2 3
RN x02-0.6-02 0.6 4.4 385 2 -02 2 3
RN x02-1-02 1 3 205 2 -02 2 3
RN x02-1.5-02 1.5 1.6 100 2 -02 2 3
RN x02-2-02 2 1.1 70 2 -02 2 3
RN x12-0.4-02 0.4 39 1460 2 -02 5 6
RN x12-0.5-02 0.5 27 1250 2 -02 5 6
RN x12-0.6-02 0.6 15 465 2 -02 5 6
RN x12-0.8-02 0.8 10 370 2 -02 5 6
RN x12-1.2-02 1.2 6.8 245 2 -02 5 6
RN x12-1.5-02 1.5 3.3 135 2 -02 5 6
RN x12-2-02 2 1.8 75 2 -02 5 6
RN x12-4-02 4 0.7 27 2 -02 5 6
RN x14-0.3-02 0.3 47 1750 2 -02 9 12
RN x14-0.5-02 0.5 39 810 2 -02 9 12
RN x14-0.8-02 0.8 27 500 2 -02 9 12
RN x14-1-02 1 15 375 2 -02 9 12
RN x14-1.2-02 1.2 10 200 2 -02 9 12
RN x14-1.5-02 1.5 6.8 130 2 -02 9 12
RN x14-2-02 2 4.2 102 2 -02 9 12
RN x14-2.5-02 2.5 3.3 72 2 -02 9 12
RN x14-3-02 3 2 55 2 -02 9 12
RN x14-4-02 4 1.5 35 2 -02 9 12
RN x22-0.6-02 0.6 47 1180 2 -02 17 21
RN x22-0.8-02 0.8 39 1000 2 -02 17 21
RN x22-1-02 1 18 610 2 -02 17 21
RN x22-1.5-02 1.5 10 220 2 -02 17 21
RN x22-2-02 2 6.8 147 2 -02 17 21
RN x22-2.5-02 2.5 5.6 105 2 -02 17 21
RN x22-3-02 3 4.5 80 2 -02 17 21
RN x22-4-02 4 3.3 45 2 -02 17 21
RN x42-0.5-02 0.5 82 2700 2 -02 32 32
RN x42-1-02 1 33 810 2 -02 32 32
RN x42-1.4-02 1.4 27 500 2 -02 32 32
RN x42-2-02 2 6.8 190 2 -02 32 32
RN x42-4-02 4 3.3 66 2 -02 32 32
RN x42-6-02 6 1.8 20 2 -02 32 32
2
EMC/EMI Products Schaffner Group Datasheets 2014
Choke selection table
Choke* Nominal current Inductance Resistance Choke Input/Output Weight
@ 40 °C L R configuration connections Type 1 Type 2
[A] [mH/path] [mΩ/path] [Qty] [g] [g]
RN 143-0.5-02 0.5 100 2900 2 -02 33
RN 143-1-02 1 47 880 2 -02 33
RN 143-2-02 2 10 230 2 -02 33
RN 143-4-02 4 3.9 58 2 -02 33
RN 143-6-02 6 1.8 20 2 -02 33
RN 152-1-02 1 68 1300 2 -02 54
RN 152-2-02 2 18 350 2 -02 54
RN 152-4-02 4 6.8 87 2 -02 54
RN 152-6-02 6 3.9 41 2 -02 54
RN 152-8-02 8 2.7 22 2 -02 54
RN 152-10-02 10 1.8 14 2 -02 54
* Replace the x by the desired housing style type 1 or 2.
1: Choke horizontal
2: Choke vertical
Test conditions:
Measuring frequency: 10 kHz; 50mV
Inductance tolerance: +50%, -30%
Resistance tolerance: max. ±15% @ 25 °C; 20mΩ, 1 A; > 20mΩ 200mΩ, 100mA; > 200mΩ 2Ω, 10mA
Electrical characteristics @ 25 °C: ±2°C
Typical choke attenuation/resonance frequency characteristics
Per CISPR 17; 50 Ω/50 Ω asym
RN x02
RN x12
RN x14
RN x22
RN x42
RN 143
RN 152
3
EMC/EMI Products Schaffner Group Datasheets 2014
Typical saturation characteristics
Inductance (typical value in %) vs. nominal current (A DC)
RN x02 / RN x12 / RN x14 / RN x22
RN x42 / RN 143 / RN 152
Mechanical data
RN 102 RN 112, RN 114, RN 122, RN 142, RN 143
RN 202 RN 212, RN 214, RN 222, RN 242
RN 152
4
EMC/EMI Products Schaffner Group Datasheets 2014
Dimensions
RN 102 RN 112 RN 114 RN 122 RN 202 RN 212 RN 214 RN 222 RN 142 RN 143 RN 242 RN 152 Tol.
A 14 17.1 21.5 27 8.8 12.5 15.5 18 32.5 32.5 18 41.8 ±0.3
B 14 17.7 22.5 28 18.2 18 23 31 33.1 33.1 31 43 ±0.3
C 9 12.6 13.2 16.5 13.5 20 25 29.3 19.7 19.7 34.3 25 ±0.3
D 4 4 4 4 4.5 4 4 4 4.3 4.3 4.2 4.5 ±0.5
E 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.2 ±0.1
F 2 2 1.5 2
G 10 10 12.5 15 5.08 10 12.5 15 20 20 15 15 ±0.6
H 10 15 20.1 25 15.21 15 10 12.5 30 30 12.5 40 ±0.6
I 4 8
L 12 12
All dimensions in mm; 1 inch = 25.4 mm
Tolerances according: ISO 2768-m / EN 22768-m
Please visit www.schaffner.com to find more details on filter connections.
5
EMC/EMI Products Schaffner Group Datasheets 2014
Headquarters, global
innovation and development
center
Switzerland
Schaffner Group
Nordstrasse 11
4542 Luterbach
T +41 32 6816 626
F +41 32 6816 630
info@schaffner.com
http://www.schaffner.com
To nd your local partner within Schaners
global network: www.schaffner.com
© 2014 Schaffner Group
The content of this document has been
carefully checked and understood. However,
neither Schaner nor its subsidiaries assume
any liability whatsoever for any errors or
inaccuracies of this document and the
consequences thereof. Published specica-
tions are subject to change without notice.
Product suitability for any area of application
must ultimately be determined by the
customer. In all cases, products must never be
operated outside their published
specications. Schaner does not guarantee
the availability of all published products. This
disclaimer shall be governed by substantive
Swiss law and resulting disputes shall be
settled by the courts at the place of business
of Schaner Holding AG. Latest publications
and a complete disclaimer can be downloa-
ded from the Schaner website. All
trademarks recognized.
Sales and application centers
China
Schaffner EMC Ltd. Shanghai
T20-3, No 565 Chuangye Road
Pudong New Area
201201 Shanghai
T +86 21 3813 9500
F +86 21 3813 9501 / 02
cschina@schaffner.com
http://www.schaffner.com.cn/
Finland
Schaffner Oy
Sauvonrinne 19 H
08500 Lohja
T +358 19 35 72 71
finlandsales@schaffner.com
France
Schaffner EMC S.A.S.
112, Quai de Bezons
Boîte postale 133
95103 Argenteuil
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com
Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
germanysales@schaffner.com
Italy
Schaffner EMC S.r.l.
Via Galileo Galilei 47
20092 Cinisello Balsamo (MI)
T +39 02 66 04 30 45/47
F +39 02 61 23 943
italysales@schaffner.com
Japan
Schaffner EMC K.K.
1-32-12, Kamiuma, Setagaya-ku
7F Mitsui-seimei Sangenjaya Bldg.
154-0011 Tokyo
T +81 3 5712 3650
F +81 3 5712 3651
japansales@schaffner.com
http://www.schaffner.jp
Singapore
Schaffner EMC Pte Ltd.
Blk 3015A Ubi Road 1
05-09 Kampong Ubi Industrial Estate
408705 Singapore
T +65 6377 3283
F +65 6377 3281
singaporesales@schaffner.com
Spain
Schaffner EMC España
Calle Caléndula 93, Miniparc III, Edificio E,
Alcobendas
Miniparc III, Edificio E
El Soto de la Moraleja
Alcobendas
28109 Madrid
M +34 618 176 133
T +34 917 912 900
F +34 917 912 901
spainsales@schaffner.com
Sweden
Schaffner EMC AB
Turebergstorg 1, 6
19147 Sollentuna
T +46 8 5792 1121 / 22
F +46 8 92 96 90
swedensales@schaffner.com
Switzerland
Schaffner EMV AG
Nordstrasse 11
4542 Luterbach
T +41 32 6816 626
F +41 32 6816 641
sales@schaffner.ch
Taiwan R.O.C.
Schaffner EMV Ltd.
6 Floor, No. 413
Rui Guang Road
114 Neihu District Taipei City
T +886 2 87525050
F +886 2 87518086
taiwansales@schaffner.com
Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muangg P.O. Box 14
51000 Lamphun
T +66 53 58 11 04
F +66 53 58 10 19
thailandsales@schaffner.com
UK
Schaffner Ltd.
5 Ashville Way
Molly Millars Lane
Wokingham
RG41 2PL Berkshire
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com
http://www.schaffner.uk.com
USA
Schaffner EMC Inc.
52 Mayfield Avenue
08837 Edison, New Jersey
T +1 800 367 5566
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
http://www.schaffner.com/us
Schaffner MTC LLC
6722 Thirlane Road
24019 Roanoke, Virginia
T +1 276 228 7943
F +1 276 228 7953
http://www.schaffner-mtc.com
Schaffner Trenco LLC
2550 Brookpark Road
44134 Cleveland, Ohio
T +1 216 741 5282
F +1 216 741 4860
www.schaffner-trenco.com
6