The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX15 Series Space saving, Equal length transmission lines Patent pending Termination side: 0.5 mm pitch, 1-row construction Mating side: 1 mm pitch, staggered 2-row construction Contacts consolidated into 1 row for equal length transmission lines Fig.1 Features 1. Space saving Self-alignment of 1.5 mm Large guide post Reduction in space is achieved by designing the contacts in 2-row staggered 1 mm pitch on the mating side and on a single row 0.5 mm pitch on the termination side (Fig. 1). 1.5mm 1.5mm 2. Equal length transmission lines Contact configuration creates equal length transmission lines preventing deterioration of LVDS signal within the connector (Fig.1). Fig.2 3. Different types Availability of types with or without metal shields allows flexibility of applications and cost reduction. Side latch -locks 4. Self alignment and self-guiding Built-in guide posts allow secure self-alignment within 1.5 mm (Fig.2). 5. Secure and complete mating / unmating Side latch-locks assure and confirm complete and secure mating of plugs to receptacles while permitting ease of disconnection (Fig. 3). 6. Enhanced shielding effectiveness Availability of version with enlarged metal shields (preventing intrusion or emission of the electromagnetic interference) further protects the integrity of LVDS signal (FX15S series, Fig.4) With metal shields (FX15 and FX15S Series) Without metal shields (FX15M Series) Fig.3 High Shielding Effectiveness 0 Emission Noise Level (dBm) 7. RoHS compliant All components and materials comply with the reqirements of EU Directive 2002/95/EC. Applications FPD-TV, FPD panels and other applications requiring secure and reliable connection and transmission signal integrity. Without metal -10 -20 -30 -40 -50 Fig.4 With metal 0.1 0.2 0.3 0.5 1 1.5 2 3 Frequency (GHz) B273 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS Product Specifications 0.5A 100V AC Current rating Voltage rating Ratings Item 1. Contact resistance 2. Insulation resistance 3. Withstanding voltage 4. Insertion-Extraction force 5. Durability (mating/un-mating) 6. Vibration 7. Shock 8. Humidity 9. Temperature cycle 10. Salt spray Operating temperature range Storage temperature range -55c to +80c (Note 1) -10c to +60c (Note 2) Specification 60 m ohms max. (Note 3) 500 M ohms min. No flashover or insulation breakdown. 0.2N min., 30N max. Conditions 1 mA 100V DC 300V AC/one minute With corresponding connector Contact resistance: 80 m ohms max.(Note 3) 50 cycles No electrical discontinuity of 1 s or more. No electrical discontinuity of 1 s or more. Contact resistance: 80 m ohms max. No damage, cracks, or parts dislocation.(Note 3) Contact resistance: 80 m ohms max. (Note 3) Insulation resistance: 500 M ohms min. Contact resistance: 80 m ohms max. (Note 3) No corrosions Frequency: 10 to 55 Hz, single amplitude of 0.76mm, 2 hours, 3 axis Acceleration of 490m/s2, 11ms durations, sine half-wave waveform, 3 cycles, 3axis. 96 hours at 40c, RH 90% to 95% Temperature : -55c +15c to +35c +85c +15c to +35c Time : 30 5 30 5 (Minutes) 5 cycles 5% water solution for 48 hours. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Includes wire conductor resistance (12mm long). Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials and Finishes Receptacle Insulator Component Material Polyamide Contact Phosphor bronze FX15S : Nickel silver FX15SC : Stainless steel Phosphor bronze Metal shields (with shields) Metal fittings (without shields) Finish Color: Black Contact area: Gold plated Termination area: Tin plated FX15S : --------------FX15SC : Tin plated Selective gold flash plated Remarks UL94V-0 ------------------------------------------- Plug Insulator Component Material Polyamide Contact Phosphor bronze Metal shields (with shields) Metal latch-locks (with shields) Metal shields, metal latch-looks (micro-coaxial cable) --------------- Nickel silver Stainless steel Finish Color: Black Contact area: Gold plated Termination area: Tin plated ----------------------------- Stainless steel Nickel plated --------------- Ordering information 1 Series Name 2 Configuration Receptacle FX15 S - 31 S - 0.5 SH 1 2 3 4 5 6 3 Number of contacts 4 Connector type Plug FX15 S - 31 P - C 1 2 3 4 5 Contact pitch 6 Housing configuration 7 7 Termination Crimp contact FX15 - 3032 PCF B 1 2 8 9 10 8 Applicable conductor 9 Packaging 10 Plating (contact area) B274 Remarks UL94V-0 ----------------------------- : FX15 Blank : With shields (or crimp contact) 15S : With shields - enhanced shielding 15SC : With shields - enhanced shielding (PCB mounting pattern : VESA standard) 15M : Without shields P S : Male contact : Female contact : 0.5 mm SH : Right angle SV : Straight C : Crimp 0.5SD : Micro-coaxial cable GND : Separate ground plate 2830 : AWG 28 to 30 3032 : AWG 30 to 32 PCF : Reel/ plug contact B : Gold plated The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal FX15 Series - Mating Diagram Crimp contact Plugs Receptacles With shields-standard (FX15-31P-C) Vertical, with shields (FX15-31S-0.5SV) B Crimp contact (FX15-3032-PCFB) Without shields (FX15M-P-C) Right angle, with shields -enhanced shielding (FX15S-S-0.5SH) B With shields - enhanced shielding (FX15S-P-C) Right angle, without shields (FX15M-S-0.5SH) B Crimp contact (FX15-2830-PCFB) With shields - enhanced shielding AWG#28 to 30 (FX15SW-31P-C) With shields - enhanced shielding PCB mouting pattern : VESA standard (FX15SC-S-0.5SH) 28 Ground plate (FX15S-P-GND) Micro-coaxial cable (FX15S-P-0.5SD) With shields - enhanced shielding PCB mouting pattern : VESA standard (FX15SC-S-0.5SV) A Ragarding the availability of the positions, contact your nearest Hirose representative. B275 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS Plugs With shields (FX15-31P-C) (27) 24.60.3 22.570.15 2.70.1 18.30.3 3.70.3 (13.45) 9.40.3 Polarizing mark indicator 140.15 P=10.1 No.2 P=10.1 150.15 No.1 Part number CL No. Number of contacts RoHS FX15-31P-C CL575-2101-2 31 YES No.30 No.31 Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. With shields, enhanced shielding (FX15S-**P-C) (A) B0.3 C0.15 40.3 2.70.1 (13.45) 9.40.3 Polarizing mark indicator 3.70.3 D0.3 E0.15 P=10.1 No.2 P=10.1 F0.15 No.1 No.n Part number CL No. Number of contacts A B C D E F FX15S-31P-C CL575-2106-6 31 27 24.6 22.6 18.3 14 15 FX15S-41P-C CL575-2107-9 41 32 29.6 27.6 23.3 19 20 FX15S-51P-C CL575-2103-8 51 37 34.6 32.6 28.3 24 25 Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. B276 No.n-1 RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal With shields - enhanced shielding AWG#28 to 30 (FX15SW-31P-C) (27) 24.60.3 22.570.15 Polarizing mark indicator 40.3 2.70.1 (13.45) 9.40.3 B 28 18.30.3 No.2 140.15 P=10.1 3.70.3 No.30 A Part number CL No. Number of contacts RoHS FX15SW-31P-C CL575-2113-1 31 YES P=10.1 150.15 No.1 No.31 Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. Without shields (FX15M-**P-C) (A) B0.3 (13.6) (13) 9.550.3 Polarizing mark indicator 4.20.3 C0.3 (D) No.2 No.1 E0.15 P=10.1 P=10.1 F0.15 No.n-1 No.n Part number CL No. Number of contacts A B C D E F G FX15M-21P-C CL575-2109-4 21 24.8 20.5 17.6 13.7 FX15M-31P-C CL575-2108-1 31 29.8 25.5 22.6 18.7 25.8 9 10 30.8 14 15 RoHS YES Note 1: Sold in package containing 100 pieces. Order by package. Note 2: Dimensions in parenthesis ( ) are reference dimensions. B277 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS Plug crimp contacts Part number CL No. FX15-2830PCFB CL575-2002-0 FX15-3032PCFB CL575-2003-3 Packaging Quantity Finish RoHS Reel 20,000 pieces per reel Gold plated YES Applicable cable (Tin plated solid soft strands) FX15-2830PCFB AWG #30 (7/0.1 mm) UL No. 0.720.1 O0.56 to 0.72mm 1571 AWG #30 (7/0.1 mm) AWG #32 (7/0.08 mm) (7) FX15-3032PCFB Applicable wire size (Stranded wire conductor) Jacket diameter O0.5 to 0.6mm UL No. 1516, 1571 (Note) 1571 Wire strip length: 1.1 to 1.8 mm t=0.150.05 Note: When using other than the recommended wire, contact your nearest Hirose representative. Tools Item Applicator Press unit Product number CL No. Applicable crimp contact AP105-FX15-2830 901-4036-0 FX15-2830PCFB AP105-FX15-3032 901-4033-1 FX15-3032PCFB CM-105 901-0005-4 --------- Note: Consult HRS representative when using applicator. B278 0.350.1 1517 0.90.15 AWG #28 (7/0.127 mm) Jacket diameter 20.15 (Stranded wire conductor) 0.50.15 Applicable wire size The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal Plug - Micro-coaxial cable (FX15SC-**P-0.5SD) No.1 No.n No.2 No.n-1 (A) B0.3 C0.15 Polarizing mark indicator 2.70.15 (13) 8.750.3 A No.1 P=0.50.1 D0.15 Part number CL No. Number of contacts A B C D FX15S-41P-0.5SD CL575-2110-3 41 31.9 29.6 27.57 20 FX15S-51P-0.5SD CL575-2118-5 51 36.9 34.6 32.57 25 No.n 3.50.3 RoHS YES Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. Ground plate for micro-coaxial cable 1.550.2 B0.2 2.20.2 11.450.3 A0.2 Part number CL No. Number of contacts A B FX15S-41P-GND CL575-2111-6 41 29.2 30.06 FX15S-51P-GND CL575-2117-2 51 34.2 35.06 RoHS YES Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. B279 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS Applicable cable (Micro-coaxial cable) Wire size (Standed wire inner conductor) Jacket diameter AWG #36 (7/0.05 mm) AWG #38 (7/0.04 mm) 0.3mm to 0.5mm AWG #40 (7/0.03 mm) Number of contacts A B 41 23.1 20 51 28.1 25 Cable preparation Insulator Gronding bar Outer conductor Jacket B280 0 2.1-0.1 Inner conductor 1+0.05 -0.2 0.9 MAX P=0.50.07 Solder coat 1 MIN A0.2 B0.15 AWG#36 to 40 Micro-coaxial cable 0.60.1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal Receptacles Vertical, with shields (FX15-31S-0.5SV) 25.70.3 19.820.2 150.15 P=0.50.1 No.1 No.31 b (6) 5.60.3 40.3 a No.30 (0.8) No.2 e f d 4.80.3 0.90.2 c 1.50.2 10.2 10.2 1.50.2 0.80.1 22.80.3 Part number CL No. Number of contacts RoHS FX15-31S-0.5SV CL575-2201-7 31 YES BRecommended PCB mounting pattern and metal mask dimensions 22.80.05 0.30.03(Land) 0.250.03(Metal mask) 6.7 +0.1 0 3.2 +0.05 0 0 1.5 -0.05 P=0.50.03 0 2.2 -0.1 150.05 2-O1(TH) 2 0.2 +0.1 0 2-O1.4(LND) 0 0.9 -0.1 4.1+0.1 0 0 17.72 -0.1 21.92 +0.1 0 Note 1 :The co-planarity of the terminal leads is as follows: * All signals and shield leads "c" and "d": 0.1mm max. * Shield leads "a", "b", "e" and " f ": 0.15 mm max. 2 : Area indicated by the crosshatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 3 : Packaged on tape-and-reel, 1000 pieces per reel. 4 : Dimensions in parenthesis ( ) are reference dimensions. B281 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS Right angle with shields - enhanced shielding (FX15S-**S-0.5SH) 4 No.n No.n-1 (4) (3) Polarizing mark indicator 4 (2.6) No.2 No.1 5 (0.2) 4.450.1 (1.7) A0.2 0.50.1 0.20.05 B0.2 C0.15 4.40.3 P=10.1 P=10.1 D0.15 E0.3 Number of contacts A B C D E F G H FX15S-31S-0.5SH CL575-2306-5 Part number HRS No. 31 15 27.4 14 15 27.8 28.8 24.8 21.6 FX15S-41S-0.5SH CL575-2307-8 41 20 32.4 19 20 32.8 33.8 29.8 26.6 FX15S-51S-0.5SH CL575-2303-7 51 25 37.4 24 25 37.8 38.8 34.8 31.6 J K L M N P R S 18 15 ------ ------ 13.2 16.8 24.8 40 23 20 5.2 8.8 18.2 21.8 29.8 45 28 25 5.2 8.8 23.2 26.8 34.8 50 RoHS YES BRecommended PCB mounting pattern and metal mask dimensions F +0.05 0 0 G -0.05 0 1.45 -0.05 0.50.03 0 1.7 -0.05 0 J -0.05 K0.05 0.30.03(Land) 0.250.03(Metal mask) 2.2 +0.05 0 3 0 L -0.05 M +0.05 0 0 N23.2 -0.05 P26.8 +0.05 0 2 13.85 4.25 2 3.7 +0.05 3.7 +0.05 0 0 4.15 3.55 +0.05 0 0 2.05 -0.05 H+0.05 0 R 3 2 S Note 1 : The coplanarity of the terminal leads is 0.1 mm max. for all signal leads and 0.15 mm max. for the shield leads. 2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock operation. 3 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 4 : The area marked indicates vacuum pick-and-place area for board placement with automatic equipment. 5 : Vacuum pick-up area 6 : Packaged on tape-and-reel, 1000 pieces per reel. 7 : Dimensions in parenthesis ( ) are reference dimensions. B282 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal Right angle, without shields (FX15M-**S-0.5SH) A0.2 0.50.1 0.20.05 No.n-1 No.n 6.150.3 No.2 No.1 Polarizing mark (5.5) indicator Vacuum pick and place area 4.80.3 4.30.3 B0.2 C0.15 P=10.1 P=10.1 D0.15 6.550.3 Part number HRS No. Number of contacts A B C D E F G FX15M-21S-0.5SH CL575-2309-3 21 10 22.4 9 10 17.9 10 35 FX15M-31S-0.5SH CL575-2308-0 31 15 27.4 14 15 22.9 15 40 RoHS YES BRecommended PCB mounting pattern and metal mask dimensions E0.05 4 2 14 2 3.4+0.05 0 0.250.03(Metal mask) 0.90.03 0 1.9-0.05 0.30.03(Land) P=0.50.03 0 3.7-0.05 7.4+0.05 0 (1.85) F0.05 2 G Note 1 : The co-planarity of all terminal leads is 0.1 mm max. 2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock operation. 3 : Packaged on tape-and-reel, 1000 pieces per reel. B283 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS Right angle with shields - enhanced shielding (FX15SC-**S-0.5SH) PCB mounting pattern : VESA standard A0.3 B0.2 C0.2 P=0.50.1 0.180.05 No.n (1.1) No.1 4.450.2 P=D0.1 0.50.1 Polarizing mark indicator (0.25 ) 1.50.1 3.10.2 1.50.1 E0.2 F0.3 G0.15 4.40.3 P=10.1 P=10.1 H0.15 Number of contacts A B C D E F G H J K FX15SC-41S-0.5SH CL575-2310-2 Part number HRS No. 41 32.85 26 20 4 20 32.4 19 20 29.75 45 FX15SC-51S-0.5SH CL575-2311-5 51 37.85 31 25 5 25 37.4 24 25 34.75 50 RoHS YES BRecommended PCB mounting pattern and metal mask dimensions B0.05 No.1 No.n 2.050.05 12 6-1.30.05 E0.05 J0.05 2 2 1.550.05 3.50.05 P=D0.05 5.6 2.50.05 2 n-0.250.03 5.10.05 P=0.50.03 2.50.05 1.550.05 C0.05 3 K Note 1 : The coplanarity of the terminal leads is 0.1 mm max. 2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock operation. 3 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 4 : Packaged on tape-and-reel, 1000 pieces per reel. 5 : Dimensions in parenthesis ( ) are reference dimensions. B284 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal Vertical with shields - enhanced shielding (FX15SC-**S-0.5SV) PCB mounting pattern : VESA standard A0.2 No.1 No.n B0.2 0.180.05 P=0.50.1 1.50.1 P=C0.1 0.50.1 D0.2 E0.3 5.30.3 4.20.2 5.50.3 Part number CL No. Number of contacts A B C D E FX15SC-41S-0.5SV CL575-2205-8 41 26 20 4 20 32.4 FX15SC-51S-0.5SV CL575-2204-5 51 31 25 5 25 37.4 RoHS YES BRecommended PCB mounting pattern and metal mask dimensions A0.05 No.n B0.05 P=0.50.3 n-0.250.03 2.50.05 2 1.550.05 3.50.05 1.550.05 No.1 P=C0.05 6-1.30.05 2.50.05 D0.05 A0.05 Note 1 : The coplanarity of the terminal leads is 0.1 mm max. 2 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 3 : Packaged on tape-and-reel, 1000 pieces per reel. B285 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS Packaging Specifications Vertical, with shields FX15-31S-0.5SV CL575-2201-7 31 44.5 (6.3) (4.8) (0.5) Right angle, with shields-enhanced shielding A A A A A 20.250.1 40.450.1 440.3 O1 . 5 120.1 20.15 40.1 1.750.1 D 5 Number of contacts O1 . HRS No. + 0 0 .1 Part number + 0 0 .1 Unreeling direction (FX15-31SC-0.5SV) Unreeling direction (FX15S-**S-0.5SH) A B C D 31 20.3 40.5 44 44.5 FX15S-41S-0.5SH CL575-2307-8 41 26.3 52.5 56 56.5 FX15S-51S-0.5SH CL575-2303-7 51 26.3 52.5 56 56.5 40.1 B0.1 C0.3 FX15S-31S-0.5SH CL575-2306-5 A0.1 Number of contacts + 0 0 .1 HRS No. (4.7) (0.5) O1 .5 Part number (6.7) 120.1 Right angle, without shields (FX15M-**S-0.5SH) Unreeling direction (6.5) Number of contacts A B C D 21 20.2 40.4 44 44.5 FX15M-31S-0.5SH CL575-2308-0 31 20.2 40.4 44 44.5 (5.15) (0.5) A0.1 B0.1 C0.3 FX15M-21S-0.5SH CL575-2309-3 120.1 20.1 40.1 0 0 .1 HRS No. O1 .5 + Part number Reel dimensions B286 (O80) (O380) O1 3 0.5 (1.6) (D) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal Right angle with shields - enhanced shielding Number of contacts A B C D 41 26.2 52.4 56 56.5 FX15SC-51S-0.5SH CL575-2311-5 51 26.2 52.4 56 56.5 120.1 20.1 (6.7) (0.5) 40.1 YES B0.1 C0.3 FX15SC-41S-0.5SH CL575-2310-2 RoHS A0.1 HRS No. O1 .5 Part number +0 0 .1 Unreeling direction (FX15SC-**S-0.5SH) Vertical with shields - enhanced shielding (FX15SC-**S-0.5SV) Unreeling direction A B C D 41 26.2 52.4 56 56.5 FX15SC-51S-0.5SV CL575-2204-5 51 26.2 52.4 56 56.5 120.1 20.1 40.1 (7) (0.5) YES B0.1 C0.3 A0.1 FX15SC-41S-0.5SV CL575-2205-8 RoHS + 0 0 .1 Number of contacts .5 HRS No. O1 Part number Reel dimensions (E) (O80) (O380) O1 3 0.5 (1.6) B287 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS BRecommended temperature profile 250 230 230c 180c Te mp e r a t u r e ( c ) 180 150 HRS test conditions Test boardGlass epoxy 40mm30mm1mm thick Solder method :Reflow Solder composition :Paste, 96.5%Sn/3%Ag/0.5%Cu Metal mask : 0.12mm thick Reflow cycles : 2 cycles MAX 250c 150c 100 25 0 9030sec. 3010sec. Preheating(150 to 180c) Sodering (230cmin) Time (sec.) The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. Note: The temperature profile indicates the maximum temperature of the connector surfaces at the highest point from the PCB mounting surface. BCleaning recommendations Organic solvent cleaning Room temperature cleaning Heated cleaning IPA (Isoporopyl alcohol) Solvent type YES YES HCFC (Hydrochlorofluorocarbon) YES YES Water based cleaning When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes it's affects on metals, platings and plastics. Remove any moisture after cleaning. Residual flux or cleaning agents in the contact areas may affect electrical performance. B288 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal Precautions and recommendations Wire termination The following documents will be needed in order to perform the cable terminations. 1Basic cable termination and crimp requirements (general explanations). 2Contact crimp termination machine instruction manual (Explanation of the press) 3Applicator parts installation table (Applicator installation explanation) 4Crimp conditions table (Crimp height/Tensile strength standard values) 5Crimp quality fundamentals manual (Bell-mouth dimensions, bent up, bent down, rolling, etc.) * Correct cable preparation and crimp termination is based on understanding and following the procedures in the above documents. Insertion of the crimp contacts in the housing Crimp contacts are inserted in the housing as illustrated below. Exercising caution when inserting, align the retention tab of the contact with the corresponding molded-in lance in the housing's contact cavity and push the contacts in. Make sure that the contact is fully inserted and the retention tab clears the molded-in lance. Molded-in lance Molded-in lance Retention tab facing up Molded-in lance Retention tab facing down Retention tab Crimp side Verify that the retention tabs clear the molded-in lances as shown on the illustration below. Retention tab Light pull on the wire, with force NOT EXCEEDING 3N will also verify the correct contact insertion. Removal of the contacts Using sharp-pointed tool of appropriate size gently lift the molded-in tab and pull-out the terminated contacts. Excersize caution as NOT to damage the molded-in lance. Should the damage occur, the entire housing will need to be replaced. 1 2 B289 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS Precautions and recommendations [ Soldering precautions related to FX15S-**P-C connectors ] Grounding Methods of the ground wire or shields for the cable assemblies 1Solder the ground wire or the shields ONLY in the areas specifically designated for this purpose, as shown on the illustrations below. 2Observe the soldering iron tip temperature and soldering time specified. 3Do not apply excessive force to the connector by pressing it with the tip of a soldering iron. 4Do not splatter the flux from the solder core. Soldering area 2 Soldering area 1 B (Ground harness examples) B290 B The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal Precautions and recommendations Plug - micro-coaxial cable [ Coutions for soldring ] 1. For the micro coaxial cable assembled to this connector, cable alignment process as shown in "Recommended cable" on the page 1 is required before assembly. 1Width of ground bar shall be 1.05 mm Max. including misalignment of overlapping, flush by cutting, side drop or soldering. Using an inadequate cable will interfere the assembly to the connector. Forceful assembly and soldering could cause mis-soldering to defective product. 2Minimize the length of outer conductor beyond the ground the bar. Inner conductor rSolder coating e 3Length of cutting the extra cable shall be 2.1 mm Max. Its over length will cause the cable touching the connector body during assembly and cause defective product. Minimal length 2.0 mm is a recommended dimension and allowed to be changed if necessary, as long as ensuring good solderability. q w Grounding bar Outer conductor w 4Pre-solder and coat the inner conductor at the cable end. 2. Recommended solder for the assembly is flux cored solder with 0.2 mm dia. (Lead-free: Sn-3Ag-0.5Cu), 21 mm length. If you consider using additional flux, please pay enough attention not to have flux wicking to the contact area. Flux wicking to the contact area will cause contact failure. 3. Place the cable to the connector and check the below points before soldering by cable assembly machine. 1Misalinment of cable end to the terminals in pitch direction 2Excessive floating of cable end 4. Follow the recommended temperature profile shown below for the soldering. qMisalignment in pitch direction wfloating However, the optimum condition could vary depending on various including type of cable and its length, solder type. Therefore refer to the recommended temperature profile and optimize the condition if necessary. Heating 265c Solder tip pressurization 13~17N 250c Pre-heating 220c Heating Temperature 2655c Duration 3~4 sec Idling 50c 2s 1s 2s 3-4s Duration of pressure application B291 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS Precautions and recommendations 5. After soldering, check that no defect is found at soldered area. Examples of correct soldered and defective soldered state are shown below. Solder shortage A AA solder bridge A B BB B Floating Correct soldering [ Coutions for potting process ] 1. Protect the soldered area by UV cured resin (referred as "potting" hereafter), in order to prevent cable breakage during cabling and other troubles. 2. Apply 3033 manufactured by THREEBOND CO., LTD. or any equivalent product for potting. Follow the instruction of potting manufacture's for the condition of UV exposure. 3. Refer to the following conditions the potting area. Number of contacts A 41 23.7 51 28.7 0 1.25 -0.75 A -30 0 2.15 -0.4 A Enlarged view 4. Use extreme care for the handling after solding to the end potting process not to apply stress to the cable, otherwise, cable could be broken. B292 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal Precautions and recommendations [ Coutions for ground plate assembly ] 1. Attach a ground plate separately provided as FX15S-41P-GND after the cable assembly process. 2. Place the ground plate onto the connector horizontally and pinch two components from top and bottom with fingers. Pinch from top and bottom with fingers Ground plate (FX15S-41P-GND) A A wHorizontally from the top qAssembly ePinch with fingers 3. Check the six fitting points after assembly and make sure that they are all correctly fitted together. How to check fitting points (Cut section of fitting points) Fitting Fitting A Fitting Fitting Fitting Ground plate hooks the protrusion of connector housing Ground plate does not hook the protrusion of connector housing Fitting NG OK [ Soldering to ground plate ] 1. Solder down the metal bar of the cable and ground plate after the assembly of ground plate in order to enhance the grounding performance and robustness against cable stroke to up and down direction. Soldering Soldering A B293 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS Precautions and recommendations Packaging of the complete cable assemblies Exercise caution as not to tangle, twist or deform the complete cable assemblies when packaging. Special care should be taken NOT to apply any excessive pull forces to the individual wires. When removing the cable assemblies from the packaging do not pull on the wires. Make sure that the latch-locks are not interfering with packaging. Packaging Connectors Mating of the connectors The connectors have built-in polarizing feature and will NOT mate when reversed. Do NOT try forced mating. Align the connectors as shown on the illustration below and fully insert the plug into the receptacle. Confirm that both latch-locks are fully engaged. Triangle mark Triangle mark Arrow mark Mating Center mark B294 Center mark Mating The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15 status on the Hirose websitePitch RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Series1mm Cable-to-Board Connectors supporting LVDS signal Precautions and recommendations Handling of Connectors after Mating Do not to apply excessive forces to the connectors when routing the cable after mating. Pulling on the entire cable with a force of 20 N or greater can damage the connector. Please take due care not to pull the cable. Un-mating of the connectors Depress equally both sides of the latch-locks as shown on the illustration and pull the plug straight out. Do not pull on the cables! B B 1 Press 1 Press 1 Press 1 Press 2Pull straight apart B Lock latches B B B295 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, will be discontinued soon. Please check the products status on thesignal Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX15 Series1mm Pitch or Cable-to-Board Connectors supporting LVDS BTechnical Information (FX15S Series) Eye Pattern Waveforms (700 MHz) 1 m Cable Length 1.5 m Cable Length Shielding Effectiveness (Shielding Characteristics Comparison Using a 2-chamber Shielded Room) Measured shielding effectiveness for frequencies from 100 MHz to 2 GHz. Shielded connectors show noise suppression of 10 db to 20 dB, when compared with connectors without the shields. 60 With cable-side shields + With PCB-side shields 50 With cable-side shields + Without PCB-side shields 40 Shielding Effect (dB) Without cable-side shields + With PCB-side shields 30 Without cable-side shields + Without PCB-side shields (0 dB line) 20 10 0 -10 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.5 2 Frequency (GHz) Notes:The measurement value of "Without plug-side shields + Without receptacle-side shields" are taken as the zero level of the graph vertical axis dB. The respective results express the noise suppression effect (dB) as a relative comparison value with this "without shields" condition as the reference. B296