BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay Semiconductors formerly General Semiconductor Surface Mount Glass Passivated Junction Fast Switching Rectifier Reverse Voltage 50 to 1000 V DO-213AB SOLDERABLE ENDS 1st BAND * d e t n e t a P * Plastic package has Underwriters Laboratories Flammability Classification 94V-0 * Capable of meeting environmental standards of MIL-S-19500 * For surface mount applications * High temperature metallurgically bonded construction * Cavity-free glass passivated junction * Fast switching for high efficiency * High temperature soldering guaranteed: 450C/5 seconds at terminals. Complete device sub-mersible temperature of 260C for 10 seconds in solder bath 0 D2 = D1 + - 0.008 (0.20) D1= 0.105 0.095 (2.67) (2.41) D2 0.022 (0.56) 0.018 (0.46) Forward Current 1.0 A Features 0.022 (0.56) 0.018 (0.46) Mechanical Data 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) Dimensions in inches and (millimeters) *Glass-plastic encapsulation is covered by Patent No. 3,996,602 and brazed-lead assembly to Patent No. 3,930,306 (R) Case: JEDEC DO-213AB, molded plastic over glass body Terminals: Plated terminals, solderable per MIL-STD-750, Method 2026 Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Mounting Position: Any Weight: 0.116 oz., 0.0046 g Packaging codes/options: 26/5K per 13" Reel (12mm tape) 46/1.5K per 7" Reel (12mm tape) Maximum Ratings & Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. Symbols Fast switching time device: 1st band is Red Polarity color bands (2nd Band) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TT=55C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum full load reverse current, full cycle average at TA=55C Maximum thermal resistance (Note 1) (Note 2) Operating junction and storage temperature range Electrical Characteristics BYM11 BYM11 BYM11 BYM11 BYM11 BYM11 BYM11 -50 -100 -200 -400 -600 -800 -1000 Units RGL 41A VRRM VRMS VDC IF(AV) RGL 41B RGL 41D RGL 41G RGL 41J RGL 41K RGL 41M Gray Red Orange Yellow Green Blue Violet 50 35 50 100 70 100 200 140 200 400 280 400 1.0 600 420 600 800 560 800 1000 700 1000 V V V A IFSM 30 A IR(AV) 50 A RJA RJT TJ, TSTG 75 30 -65 to +175 C/W C Ratings at 25C ambient temperature unless otherwise specified. Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA=25C at rated DC blocking voltage TA=125C Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Typical junction capacitance at 4.0V, 1MHz Symbols VF BYM11 BYM11 BYM11 BYM11 BYM11 BYM11 BYM11 -50 -100 -200 -400 -600 -800 -1000 Units 1.3 5.0 50 IR trr 150 CJ V A 250 15 500 ns pF Notes: (1) Thermal resistance from junction to ambient, 0.24 x 0.24" (6.0 x 6.0mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24 x 0.24" (6.0 x 6.0mm) copper pads to each terminal Document Number 88547 07-Mar-02 www.vishay.com 1 BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig 2 - Maximum Non-repetitive Peak Forward Surge Current Fig 1 - Forward Current Derating Curve 30 1.25 Peak Forward Surge Current (A) Average Forward Rectified Current (A) Resistive or Inductive Load 1.0 0.75 0.5 0.25 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 25 20 15 10 0 0 50 25 75 100 150 125 175 1 Fig 3 - Typical Instantaneous Forward Characteristics Fig 4 - Typical Reverse Characteristics 10 Instantaneous Reverse Current (A) Instantaneous Forward Current (A) 10 1 TJ = 25C Pulse width = 300s 1% Duty Cycle 0.1 0.01 1 TJ = 100C 0.1 TJ = 25C 0.01 0.4 0.6 0.8 1.0 1.4 1.2 1.6 0 20 100 10 1 Reverse Voltage (V) www.vishay.com 2 100 Transient Thermal Impedance (C/W) 100 TJ = 25C f = 1.0 MHz Vsig = 50mVp-p 10 60 80 100 Fig. 6 - Typical Transient Thermal Impedance Fig 5 - Typical Junction Capacitance 1 40 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) Capacitance (pF) 100 10 Number of Cycles at 60Hz Terminal Temperature (C) Mounted on 0.20 x 0.27" (5 x 7mm) Copper Pad Areas 10 1 0.1 0.01 0.1 10 1 100 t -- Pulse Duration (sec) Document Number 88547 07-Mar-02